Polyurethane modified epoxy vitrimer and its stress relaxation behavior

2021 ◽  
Vol 41 (5) ◽  
pp. 365-374
Author(s):  
Weiqiang Lian ◽  
Huipeng Han ◽  
Xiaoxin Zhang ◽  
Guirong Peng ◽  
Zhaojing Jia ◽  
...  
Keyword(s):  
Activation Energy ◽  
Stress Relaxation ◽  
Service Life ◽  
Mechanical Strength ◽  
Transesterification Reaction ◽  
Amino Ester ◽  
Stress Relaxation Behavior ◽  
Modified Epoxy ◽  
Thermal Welding ◽  
Thermosetting Epoxy

Abstract Anhydride cured epoxy vitrimers usually exhibit desired mechanical strength but poor toughness and slow transesterification rate. Therefore, the repairing property of the material was restricted. In this paper, polyurethane modified epoxy vitrimer (PU-Epv) was prepared. PU was introduced into the vitrimer system of tetrahydrophthalic anhydride cured epoxy to improve the toughness of the material. Meanwhile, because of the presence of amino ester, the transesterification reaction was promoted and the activation energy of the transesterification was only 33.59 kJ/mol. In the thermal welding experiment, the material could be welded at least five times, and scratches on the surface of the samples could be efficiently repaired within 30 min. The toughness of the material was improved without damaging the strength. Meanwhile, the hard thermosetting epoxy was endowed with excellent repairing properties to increase the service life of the material.

scholarly journals Stress Relaxation Aging Behavior and Constitutive Modelling of AA7150-T7751 under Different Temperatures, Initial Stress Levels and Pre-Strains

Metals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1215 ◽  
Author(s):  
Yixian Cai ◽  
Lihua Zhan ◽  
Yongqian Xu ◽  
Chunhui Liu ◽  
Jianguang Wang ◽  
...  
Keyword(s):  
Activation Energy ◽  
Stress Relaxation ◽  
Initial Stress ◽  
Stress Level ◽  
Relaxation Behavior ◽  
Average Error ◽  
Aging Behavior ◽  
Stress Relaxation Behavior ◽  
Stress Levels ◽  
Different Temperatures

Age forming is an advanced manufacture technology for forming large aluminum panels. Temperature, initial stress level and pre-strains have a great effect on the formability and performance. The stress relaxation aging behavior of AA7150-T7751 under different temperatures, initial stress levels and pre-strains was studied through stress relaxation tests, tensile tests and TEM observations. The results show that the formability can be improved with the increase of temperature, initial stress levels and pre-strains. Deformation mechanisms during stress relaxation of the material were analyzed on the basis of creep stress exponent and apparent activation energy. The aging precipitates of the studied alloy were not sensitive to the age forming conditions, but drastically coarsened at over aging temperature, which decreased the mechanical properties. In addition, the relationship between stress relaxation behavior and aging strengthening is discussed. Based on the dislocation theory and the modified Arrhenius equation, a stress relaxation constitutive equation considering the initial mobile dislocation density and temperature dependent activation energy was established. This model can predict very well the stress relaxation behavior under various temperature, stress level and pre-strain conditions, with an average error of 2%.

Effects of accelerator type on stress relaxation behavior and network structure of aged natural rubber/chloroprene rubber vulcanizates

2016 ◽  
Vol 49 (5) ◽  
pp. 381-396 ◽  
Author(s):  
Farzad A Nobari Azar ◽  
Murat Şen
Keyword(s):  
Stress Relaxation ◽  
Natural Rubber ◽  
Network Structure ◽  
Structural Changes ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Rubber Blends ◽  
Chloroprene Rubber ◽  
Weather Changes ◽  
Behavior Network

Natural rubber/chloroprene rubber (NR/CR) blends are among the commonly used rubber blends in industry and continuously are exposed to severe weather changes. To investigate the effects of accelerator type on the network structure and stress relaxation of unaged and aged NR/CE vulcanizates, tetramethyl thiuram disulfide, 2-mercaptobenzothiazole, and diphenyl guanidine accelerators have been chosen to represent fast, moderate, and slow accelerator groups, respectively. Three batches have been prepared with exactly the same components and mixing conditions differing only in accelerator type. Temperatures scanning stress relaxation and pulse nuclear magnetic resonance techniques have been used to reveal the structural changes of differently accelerated rubber blends before and after weathering. Nonoxidative thermal decomposition analyses have been carried out using a thermogravimetric analyzer. Results indicate that there is a strong interdependence between accelerator type and stress relaxation behavior, network structure, cross-linking density, and aging behavior of the blends. Accelerator type also affects decomposition energy of the blends.

Preparation Techniques and Property Evaluations of Highly Air Permeable Needle-Punched Geotextiles

2015 ◽  
Vol 749 ◽  
pp. 278-281
Author(s):  
Jia Horng Lin ◽  
Jing Chzi Hsieh ◽  
Jin Mao Chen ◽  
Wen Hao Hsing ◽  
Hsueh Jen Tan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Service Life ◽  
Mechanical Strength ◽  
Pore Structure ◽  
Test Results ◽  
Needle Punching ◽  
Pet Fibers ◽  
Environmental Requirements ◽  
Preparation Techniques

Geotextiles are made of polymers, and their conjunction with different processes and materials can provide geotextiles with desirable characteristics and functions, such as filtration, separation, and drainage, and thereby meets the environmental requirements. Chemical resistant and mechanical strong polymers, including polyester (PET) and polypropylene (PP), are thus used to prolong the service life of the products made by such materials. This study proposes highly air permeable geotextiles that are made with different thicknesses and various needle punching speeds, and the influences of these two variables over the pore structure and mechanical properties are then examined. PET fibers, PP fibers, and recycled Kevlar fibers are blended, followed by being needle punched with differing spaces and speeds to form geotextiles with various thicknesses and porosities. The textiles are then evaluated for their mechanical strength and porosity. The test results show that a thickness of 4.5 cm and 1.5 cm demonstrate an influence on the tensile strength of the geotextiles, which is ascribed to the webs that are incompletely needle punched. However, the excessive needle punching speed corresponding to a thickness of 0.2 cm results in a decrease in tensile strength, but there is also an increase in the porosity of the geotextiles.

scholarly journals Stress-relaxation behavior in gels with ionic and covalent crosslinks

2010 ◽  
Vol 107 (6) ◽  
pp. 063509 ◽  
Author(s):  
Xuanhe Zhao ◽  
Nathaniel Huebsch ◽  
David J. Mooney ◽  
Zhigang Suo
Keyword(s):  
Stress Relaxation ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Covalent Crosslinks

Reloading Stress Relaxation Behavior Analysis Based on a Creep Model for High Temperature Bolting Steel

2013 ◽  
Vol 328 ◽  
pp. 950-954
Author(s):  
Wei Wei Zhang ◽  
Hong Xu ◽  
Hong Yuan Li
Keyword(s):  
High Temperature ◽  
Stress Relaxation ◽  
Steady State Creep ◽  
Relaxation Behavior ◽  
Creep Model ◽  
National Research Institute ◽  
Time Intervals ◽  
Stress Relaxation Behavior ◽  
Proposed Model ◽  
Good Agreement

An analytical method based on a creep model is being developed to investigate the effect of retightening on stress relaxation behavior for high-temperature turbine and valve studs/bolts. In order to validate the approach, the calculated results are compared to the results of uniaxial reloading stress relaxation testing, which were performed by the National Research Institute for Metals of Japan (NRIM) for 12Cr-1Mo-1W-1/4V stainless steel bolting material at 550°C. It was shown that the proposed model based on Altenbach-Gorash-Naumenko creep model for the primary and steady state creep could be applied for the present data. The calculated residual stresses versus time curves were in good agreement with the measured for initial stress level of 273.6MPa at 550°C and for specific reloading time intervals of 24, 72, 240, and 720 hours.

Sign in / Sign up

Export Citation Format

Share Document