Study of effect of wood-flour content on mechanical, thermal, rheological properties and thermoformability of wood-polypropylene composites

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Deepti Marathe ◽  
Hemant Joshi ◽  
Pratiksha Kambli ◽  
Pramod Joshi
Keyword(s):  
Mechanical Properties ◽  
Rheological Properties ◽  
Wood Flour ◽  
Thickness Distribution ◽  
Flexural Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Small Amplitude Oscillatory Shear ◽  
Polypropylene Composites ◽  
Dynamic Mechanical

Abstract Wood plastic composites (WPC) were made from polypropylene (PP), impact copolymer (ICP) and wood flour (WF) by varying the WF content from 10 to 40% with PP grafted maleic anhydride as a coupling agent. The effect of varying WF content was studied on rheological, thermal, mechanical properties and dynamic mechanical properties. Experimental small amplitude oscillatory shear (SAOS) data was compared with the Einstein–Batchelor and empirical Krieger–Dougherty relations. Significant dependence of mechanical and rheological properties on WF content was observed. Young’s modulus, flexural modulus and dynamic shear viscosity increased with WF content. Results of dynamic mechanical analysis (DMA) showed increase in storage modulus with WF content. Three millimeter thick compression molded composites sheets were thermoformed using axisymmetric molds with two draw depths. Sag observed visually during thermoforming decreased with increasing WF content. Components made from the composites showed close to uniform thickness distribution as compared to those from ICP.

scholarly journals Styrene–Acrylic Emulsion with “Transition Layer” for Damping Coating: Synthesis and Characterization

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1406
Author(s):  
Daoyuan Chen ◽  
Mingjin Ding ◽  
Zhixiong Huang ◽  
Yanbing Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Transition Layer ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Latex Film ◽  
Seeded Emulsion Polymerization ◽  
Acrylic Emulsion ◽  
Dynamic Mechanical

In order to study the dynamic mechanical properties of styrene–acrylic latex with a core/shell structure, a variety of latexes were synthesized by semi-continuous seeded emulsion polymerization based on “particle design” with the same material. The latexes were characterized by rotary viscosimeter, dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), dynamic mechanical analysis (DMA), and universal testing machine. The effects of difference at the glass transition temperature (Tg) of core and shell and the introduction of the “transition layer” on the damping and mechanical properties of latex film were studied. The results indicate that as the Tg of core and shell gets closer, the better the compatibility of core and shell, from phase separation to phase continuity. Furthermore, the introduction of the “transition layer” can effectively improve the tensile strength and tan δ (max) of the latex film. The tensile strength and maximum loss factor (f = 1 Hz) of latex with the “transition layer” increased by 36.73% and 29.11% respectively compared with the latex without the “transition layer”. This work provides a reference for the design of emulsion for damping coating.

scholarly journals Dynamic Mechanical Properties of Hybrid Layered Silicates/Kaolin Geopolymer Filler in Epoxy Composites

2017 ◽  
Vol 54 (3) ◽  
pp. 543-545 ◽  
Author(s):  
Yusrina Mat Daud ◽  
Kamarudin Hussin ◽  
Azlin Fazlina Osman ◽  
Che Mohd Ruzaidi Ghazali ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Speed ◽  
Hybrid Composites ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Layered Silicates ◽  
Epoxy Composites ◽  
Damping Factor ◽  
Dynamic Mechanical

Preparation epoxy based hybrid composites were involved kaolin geopolymer filler, organo-montmorillonite at 3phr by using high speed mechanical stirrer. A mechanical behaviour of neat epoxy, epoxy/organo-montmorillonite and its hybrid composites containing 1-8phr kaolin geopolymer filler was studied upon cyclic deformation (three-point flexion mode) as the temperature is varies. The analysis was determined by dynamic mechanical analysis (DMA) at frequency of 1.0Hz. The results then expressed in storage modulus (E�), loss modulus (E�) and damping factor (tan d) as function of temperature from 40 oC to 130oC. Overall results indicated that E�, E�� and Tg increased considerably by incorporating optimum 1phr kaolin geopolymer in epoxy organo-montmorillonite hybrid composites.

Dynamic Mechanical Properties of Grafted Polypropylene Composites Reinforced with Acetylated Wheat Straw Fibers

2015 ◽  
Vol 1767 ◽  
pp. 139-143
Author(s):  
Ramón Sánchez ◽  
Jacobo Aguilar ◽  
Silvia Y. Martínez ◽  
Reyes J. Sanjuan ◽  
Gerardo A. Mejía ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wheat Straw ◽  
Coupling Agent ◽  
Optical Microscope ◽  
Dynamic Mechanical Properties ◽  
Particle Sizes ◽  
Polypropylene Composites ◽  
Dynamic Mechanical ◽  
Twin Screw ◽  
Composite Pellets

ABSTRACTDynamic mechanical properties of polypropylene (PP) and grafted polypropylene (PP-g-MA) composites reinforced with acetylated wheat straw fibers (WSF) is reported in this work. The materials were prepared with different fiber particle sizes (40, 80 and 140 U.S. mesh) and at different fiber contents (5, 10 and 15 wt.%). The PP and PP-g-MA composites, where anhydride maleic (MA) was used as coupling agent, were obtained using a twin-screw extruder; whereas an injection-molding machine molded the composite pellets into testing specimens. To observe the morphology of the composites, micrographs were taken with an optical microscope. The Dynamic mechanical properties were analyzed using a torsional rheometer. The morphological analysis showed a high porous structure somehow similar to foamed materials. The storage modulus (G′) increased by increasing the fiber content, and decreased with fiber particle sizes for the PP composites. Meanwhile, the use of the coupling agent additive promoted a modulus increase due to higher fiber-polymer interaction, from better adhesion and chemical bonds formation between the fibers-coupling agent-PP.

Thermal stability and dynamic mechanical behavior of functional multiphase boride ceramics/epoxy composites

2019 ◽  
Vol 39 (6) ◽  
pp. 508-514
Author(s):  
Yannan He ◽  
Zhiqiang Yu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Epoxy Composites ◽  
Scanning Calorimetry ◽  
Element Analysis ◽  
Reaction Heat ◽  
Dynamic Mechanical

Abstract The thermal and dynamic mechanical properties of epoxy composites filled with zirconium diboride/nano-alumina (ZrB2/Al2O3) multiphase particles were investigated by means of differential scanning calorimetry, dynamic thermo-mechanical analysis, and numerical simulation. ZrB2/Al2O3 particles were surface organic functional modified by γ-glycidoxypropyltrimethoxysilane for the improvement of their dispersity in epoxy matrix. The results indicated that the curing exotherm of epoxy resin decreased significantly due to the addition of ZrB2/Al2O3 multiphase particles. In comparison to the composites filled with unmodified particles, the modified multiphase particles made the corresponding filling composites exhibit lower curing reaction heat, lower loss modulus, and higher storage modulus. Generally speaking, the composites filled with 5 wt% modified multiphase particles presented the best thermal stability and thermo-mechanical properties due to the better filler-matrix interfacial compatibility and the uniform dispersity of modified particles. Finite element analysis also suggested that the introduction of modified ZrB2/Al2O3 multiphase particles increased the stiffness of the corresponding composites.

scholarly journals Study on dynamic mechanical properties of a nylon-like polyester tire cord

2019 ◽  
Vol 14 ◽  
pp. 155892501986880 ◽  
Author(s):  
Liyong Tian ◽  
Di Wang ◽  
Qufu Wei
Keyword(s):  
Mechanical Properties ◽  
Complex Modulus ◽  
Nylon 6 ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Vital Role ◽  
Tire Cord ◽  
Synthetic Fibers ◽  
Dynamic Mechanical ◽  
Polyester Cord

Tires might be the first technically significant composite out of rubber and play a vital role in the overall performance of a car. The essential functions of a tire rely to a great extent on the properties of tire cords. Polyester and nylon cords make up the majority of synthetic fibers used in tires. A new kind of polyester cord has been developed combining the performance characteristics of both polyester and nylon cords. This article examines the dynamic mechanical properties of this nylon-like polyester tire cord by adopting dynamic mechanical analysis, Instron, and DISC fatigue experiments, as well as its dynamic adhesion property using flex fatigue experiment. It demonstrated that the dynamic complex modulus of the nylon-like polyester cord was higher than that of nylon 6 cord but lower than that of standard polyester cord, which was a favorable characteristic when it came to replacing nylon 6 cord with nylon-like polyester cord in tires. Under cyclic loading, hysteresis loss of nylon 6 cord > nylon 66 cord > nylon-like polyester cord > standard polyester cord was observed. In the DISC experiment, nylon-like polyester had a similar compression resistance property to that of nylon 6 cord. At a temperature below 85°C, nylon-like polyester cord maintained roughly the same level of residual ratio of dynamic adhesion, but beyond this temperature point, nylon 6 exhibited a better performance.

PLA-coated sisal fibre-reinforced polyester composite: Water absorption, static and dynamic mechanical properties

2018 ◽  
Vol 53 (1) ◽  
pp. 65-72 ◽  
Author(s):  
MK Gupta ◽  
Rohit Singh
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Loss Modulus ◽  
Alkali Treatment ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Static Properties ◽  
Physical Treatment ◽  
Sisal Fibre ◽  
Dynamic Mechanical

In the present work, a novel physical treatment (PLA coating) of sisal fibres and its influence on the water absorption, static and dynamic mechanical properties of its composites has been presented. The treated sisal fibres were used consisted of alkali treatment and PLA coating to fabricate its polyester-based composites by hand lay-up technique keeping constant fibres content as 20 wt.% . Water absorption analysis was carried out in terms of water uptake (%), and sorption, diffusion and permeability coefficient. In addition, static properties were examined in terms of tensile, flexural and impact test, and dynamic mechanical analysis was performed in terms of storage modulus [Formula: see text], loss modulus [Formula: see text], damping [Formula: see text] and glass transition temperature [Formula: see text]. It was reported that the PLA-coated sisal composites showed the best performance in water absorption, mechanical and dynamic mechanical properties than pure sisal and alkali-treated sisal composites. There were 33%, 49%, 48%, and 27% improvement in water resistance, tensile strength, flexural strength and impact strength, respectively, of PLA-coated sisal composites as compared to that of pure sisal composite.

Sign in / Sign up

Export Citation Format

Share Document