scholarly journals CFD Simulation of a Natural Circulation Helium Loop

2015 ◽  
Vol 23 (1) ◽  
pp. 31-36 ◽  
Author(s):  
Branislav Knížat ◽  
Peter Hlbočan ◽  
Marek Mlkvik
Keyword(s):  
Fast Reactor ◽  
Heat Exchangers ◽  
Cfd Simulation ◽  
Natural Circulation ◽  
Calculation Procedure ◽  
Pressure Losses

Abstract The paper deals with a flow in a closed helium loop serving for cooling of a fast reactor. The flow in pipeline branches of the system is simulated by methods of CFD. The purpose is to find exact values of pressure losses, so that heat exchangers could be successfully designed and so that the power available for a loop drive could be optimally utilized. General approach to the simulation is presented, as well as the calculation procedure and achieved results.

scholarly journals Efficiency Improvement of Miniaturized Heat Exchangers

Fluids ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 25
Author(s):  
Iris Gerken ◽  
Thomas Wetzel ◽  
Jürgen J. Brandner
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Exchangers ◽  
Assessment Method ◽  
Flow Path ◽  
Transfer Enhancement ◽  
Pressure Losses ◽  
Pin Fin ◽  
Additional Pressure ◽  
The Impact

Micro heat exchangers have been revealed to be efficient devices for improved heat transfer due to short heat transfer distances and increased surface-to-volume ratios. Further augmentation of the heat transfer behaviour within microstructured devices can be achieved with heat transfer enhancement techniques, and more precisely for this study, with passive enhancement techniques. Pin fin geometries influence the flow path and, therefore, were chosen as the option for further improvement of the heat transfer performance. The augmentation of heat transfer with micro heat exchangers was performed with the consideration of an improved heat transfer behaviour, and with additional pressure losses due to the change of flow path (pin fin geometries). To capture the impact of the heat transfer, as well as the impact of additional pressure losses, an assessment method should be considered. The overall exergy loss method can be applied to micro heat exchangers, and serves as a simple assessment for characterization. Experimental investigations with micro heat exchanger structures were performed to evaluate the assessment method and its importance. The heat transfer enhancement was experimentally investigated with microstructured pin fin geometries to understand the impact on pressure loss behaviour with air.

scholarly journals A Three-Dimensional Numerical and Multi-Objective Optimal Design of Wavy Plate-Fins Heat Exchangers

Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 9
Author(s):  
Chao Yu ◽  
Xiangyao Xue ◽  
Kui Shi ◽  
Mingzhen Shao
Keyword(s):  
Heat Exchangers ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Basis Functions ◽  
Approximation Model ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Multi Objective Genetic Algorithm ◽  
Colburn Factor ◽  
Heat Exchange Efficiency

This paper presents a method for optimizing wavy plate-fin heat exchangers accurately and efficiently. It combines CFD simulation, Radical Basis Functions (RBF) with multi-objective optimization to improve the performance. The optimization of the Colburn factor j and the friction coefficient f is regarded as a multi-objective optimization problem, due to the existence of two contradictory goals. The approximation model was obtained by Radical Basis Functions, and the shape of the heat exchanger was optimized by multi-objective genetic algorithm (MOGA). The optimization results showed that j increased by 17.62% and f decreased by 20.76%, indicating that the heat exchange efficiency was significantly enhanced and the fluid structure resistance reduced. Then, from the aspects of field synergy and tubulence energy, the performance advantage of the optimized structure was further confirmed.

Analysis of a Virtual Prototype First-Stage Rotor Blade Using Integrated Computer-Based Design Tools

2006 ◽  
Author(s):  
Michel Arnal ◽  
Christian Precht ◽  
Thomas Sprunk ◽  
Tobias Danninger ◽  
John Stokes
Keyword(s):  
Heat Transfer ◽  
Gas Flow ◽  
Thermal Loading ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Life Assessment ◽  
Element Analysis ◽  
Pressure Losses ◽  
Cooling Channels ◽  
Internally Cooled

The present paper outlines a practical methodology for improved virtual prototyping, using as an example, the recently re-engineered, internally-cooled 1st stage blade of a 40 MW industrial gas turbine. Using the full 3-D CAD model of the blade, a CFD simulation that includes the hot gas flow around the blade, conjugate heat transfer from the fluid to the solid at the blade surface, heat conduction through the solid, and the coolant flow in the plenum is performed. The pressure losses through and heat transfer to the cooling channels inside the airfoil are captured with a 1-D code and the 1-D results are linked to the three-dimensional CFD analysis. The resultant three-dimensional temperature distribution through the blade provides the required thermal loading for the subsequent structural finite element analysis. The results of this analysis include the thermo-mechanical stress distribution, which is the basis for blade life assessment.

Bejan’s Constructal Theory Analysis of Gas-Liquid Cooled Finned Modules

2011 ◽  
Vol 133 (7) ◽  
Author(s):  
Giulio Lorenzini ◽  
Simone Moretti
Keyword(s):  
Thermal Behavior ◽  
Heat Exchangers ◽  
High Performance ◽  
Numerical Study ◽  
Constructal Theory ◽  
Electronic Components ◽  
Theory Analysis ◽  
Pressure Losses ◽  
Different Types ◽  
Overall Performance

High performance heat exchangers represent nowadays the key of success to go on with the trend of miniaturizing electronic components as requested by the industry. This numerical study, based on Bejan’s Constructal theory, analyzes the thermal behavior of heat removing fin modules, comparing their performances when operating with different types of fluids. In particular, the simulations involve air and water (as representative of gases and liquids), to understand the actual benefits of employing a less heat conductive fluid involving smaller pressure losses or vice versa. The analysis parameters typical of a Constructal description (such as conductance or Overall Performance Coefficient) show that significantly improved performances may be achieved when using water, even if an unavoidable increase in pressure losses affects the liquid-refrigerated case. Considering the overall performance: if the parameter called Relevance tends to 0, air prevails; if it tends to 1, water prevails; if its value is about 0.5, water prevails in most of the case studies.

Natural circulation capability of Pb-Bi cooled fast reactor: PEACER

2000 ◽  
Vol 37 (1-4) ◽  
pp. 211-216 ◽  
Author(s):  
Jong-Eun Chang ◽  
Kune Y. Suh ◽  
Il Soon Hwang
Keyword(s):  
Fast Reactor ◽  
Natural Circulation

scholarly journals Preliminary analysis and design of the heat exchangers for the Molten Salt Fast Reactor

2020 ◽  
Vol 52 (1) ◽  
pp. 51-58 ◽  
Author(s):  
Andrea Di Ronco ◽  
Antonio Cammi ◽  
Stefano Lorenzi
Keyword(s):  
Molten Salt ◽  
Fast Reactor ◽  
Heat Exchangers ◽  
Preliminary Analysis ◽  
Analysis And Design

scholarly journals Thermal Diffusion Performance of a Diffuser by various Guide Vanes configurations

2018 ◽  
Vol 225 ◽  
pp. 03018
Author(s):  
Aja O. Chikere ◽  
Hussain H. Al-Kayiem ◽  
Zainal Ambri A. Karim
Keyword(s):  
Gas Flow ◽  
Cfd Simulation ◽  
Bench Mark ◽  
Ansys Fluent ◽  
Guide Vanes ◽  
Pressure Losses ◽  
Fluent Software ◽  
Thermal Diffuser ◽  
Crosssectional Area ◽  
Large Diffusion

The use of vane-less diffuser with large diffusion angle has shown a setback in the diffusion process of high temperature working fluids. The hot gas flow was characterized as a jet-like flow. This paper presents problem, encountered practically, using a vane-less diffuser with large diffusion angle and how the problem is solved by CFD simulation. The investigated thermal diffuser has a length of 0.3 m, an inlet to outlet crosssectional area ratio of 1:25 and diffusion angle of 115.44o. To resolve the jet-like flow problem and poor distribution of the flow temperature at the diffuser outlet, the study suggested the use of guide-vanes into the diffuser. The study employed CFD simulation by ANSYS-FLUENT software to analyze the flow and thermal process in the diffuser. Three different shapes of guide vanes; block-shaped, oval-shaped and airfoil-shaped were considered in this study and at different vanes diffusion angles, as well as vane-less case, which was adopted as the bench mark case. The simulation results of the velocity, temperature and pressure at the diffuser outlet were compared for all cases. It was found that the guide vanes with symmetrical airfoil profile provided the best performance with most uniform distribution at the outlet of the diffuser. Also, the airfoil-shaped guide vanes resulted in lower pressure losses compared to the block-shaped and oval-shaped guide vanes. According to the analysis results, the diffuser was redesigned to improve the diffusion and temperature distribution across the diffuser outlet.

Sign in / Sign up

Export Citation Format

Share Document