scholarly journals Efficient fractionation of corn stover by bisulfite pretreatment for the production of bioethanol and high value products

BioResources ◽  
2019 ◽  
Vol 14 (3) ◽  
pp. 6501-6515
Author(s):  
Liping Tan ◽  
Zhongyang Liu ◽  
Tongjun Liu ◽  
Fangfang Wang

Fractionation of corn stover (CS) was carried out by bisulfite pretreatment in order to improve the production of bioethanol and high-value chemicals. Firstly, the optimum bisulfite pretreatment conditions of CS (170 C, 30 min, 7% NaHSO3, 1% H2SO4) were identified. Next, a biorefinery process of bisulfite pretreatment for CS was proposed. CS was separated into solid and liquor components using such pretreatment. The solid components were employed for bioethanol production by quasi-simultaneous saccharification and fermentation (Q-SSF). The bisulfite liquor was fractionated into hemicellulosic sugars and lignin by different types of resins. It was shown that CS components could be effectively fractionated through bisulfite pretreatment in combination with resin separation to produce bioethanol, hemicellulosic sugars, and lignosulfonate.

Fermentation ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 191
Author(s):  
Tin Diep Trung Le ◽  
Vi Phuong Nguyen Truong ◽  
My Thi Tra Ngo ◽  
Tae Hyun Kim ◽  
Kyeong Keun Oh

Extremely low-liquid ammonia (ELLA) pretreatment using aqueous ammonia was investigated in order to enhance the enzymatic saccharification of corn stover and subsequent ethanol production. In this study, corn stover was treated with an aqueous ammonia solution at different ammonia loading rates (0.1, 0.2, and 0.3 g NH3/g biomass) and various liquid-to-solid (L/S) ratios (0.55, 1.12, and 2.5). The ELLA pretreatment was conducted at elevated temperatures (90–150 °C) for an extended period (24–120 h). Thereafter, the pretreated material was saccharified by enzyme digestion and subjected to simultaneous saccharification and fermentation (SSF) tests. The effects of key parameters on both glucan digestibility and xylan digestibility were analyzed using analysis of variance (ANOVA). Under optimal pretreatment conditions (L/S = 2.5, 0.1 g-NH3/g-biomass, 150 °C), 81.2% glucan digestibility and 61.1% xylan digestibility were achieved. The highest ethanol yield achieved on the SSF tests was 85.4%. The ethanol concentration was 14.5 g/L at 96 h (pretreatment conditions: liquid-to-solid ratio (L/S) = 2.5, 0.1 g-NH3/g-biomass, 150 °C, 24 h. SSF conditions: microorganism Saccharomyces cerevisiae (D5A), 15 FPU/g-glucan, CTech2, 3% w/v glucan, 37 °C, 150 rpm).


Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2889
Author(s):  
Georgia Antonopoulou

The effect of thermal, acid and alkali pretreatment methods on biological hydrogen (BHP) and bioethanol production (BP) from grass lawn (GL) waste was investigated, under different process schemes. BHP from the whole pretreatment slurry of GL was performed through mixed microbial cultures in simultaneous saccharification and fermentation (SSF) mode, while BP was carried out through the C5yeast Pichia stipitis, in SSF mode. From these experiments, the best pretreatment conditions were determined and the efficiencies for each process were assessed and compared, when using either the whole pretreatment slurry or the separated fractions (solid and liquid), the separate hydrolysis and fermentation (SHF) or SSF mode, and especially for BP, the use of other yeasts such as Pachysolen tannophilus or Saccharomyces cerevisiae. The experimental results showed that pretreatment with 10 gH2SO4/100 g total solids (TS) was the optimum for both BHP and BP. Separation of solid and liquid pretreated fractions led to the highest BHP (270.1 mL H2/g TS, corresponding to 3.4 MJ/kg TS) and also BP (108.8 mg ethanol/g TS, corresponding to 2.9 MJ/kg TS) yields. The latter was achieved by using P. stipitis for the fermentation of the hydrolysate and S. serevisiae for the solid fraction fermentation, at SSF.


2016 ◽  
Vol 27 (1) ◽  
pp. 22-35 ◽  
Author(s):  
Elsa Cherian ◽  
M. Dharmendira Kumar ◽  
G. Baskar

Purpose – The purpose of this paper is to optimize production of cellulase enzyme from agricultural waste by using Aspergillus fumigatus JCF. The study also aims at the production of bioethanol using cellulase and yeast. Design/methodology/approach – Cellulase production was carried out using modified Mandel’s medium. The optimization of the cellulase production was carried out using Plackett-Burman and Response surface methodology. Bioethanol production was carried out using simultaneous saccharification and fermentation. Findings – Maximum cellulase production at optimized conditions was found to be 2.08 IU/ml. Cellulase was used for the saccharification of three different feed stocks, i.e. sugar cane leaves, corn cob and water hyacinth. Highest amount of reducing sugar was released was 29.1 gm/l from sugarcane leaves. Sugarcane leaves produced maximum bioethanol concentration of 9.43 g/l out of the three substrates studied for bioethanol production. Originality/value – The present study reveals that by using the agricultural wastes, cellulase production can be economically increased thereby bioethanol production.


Sign in / Sign up

Export Citation Format

Share Document