scholarly journals Defect identification method for poplar veneer based on progressive growing generated adversarial network and MASK R-CNN model

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 3041-3052
Author(s):  
Kai Hu ◽  
Baojin Wang ◽  
Yi Shen ◽  
Jieru Guan ◽  
Yi Cai
Keyword(s):  
Neural Network ◽  
Transfer Learning ◽  
Surface Defects ◽  
Learning Strategy ◽  
Back Propagation ◽  
Self Organizing Map ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
Main Production ◽  
Som Neural Network

As the main production unit of plywood, the surface defects of veneer seriously affect the quality and grade of plywood. Therefore, a new method for identifying wood defects based on progressive growing generative adversarial network (PGGAN) and the MASK R-CNN model is presented. Poplar veneer was mainly studied in this paper, and its dead knots, live knots, and insect holes were identified and classified. The PGGAN model was used to expand the dataset of wood defect images. A key ideal employed the transfer learning in the base of MASK R-CNN with a classifier layer. Lastly, the trained model was used to identify and classify the veneer defects compared with the back- propagation (BP) neural network, self-organizing map (SOM) neural network, and convolutional neural network (CNN). Experimental results showed that under the same conditions, the algorithm proposed in this paper based on PGGAN and MASK R-CNN and the model obtained through the transfer learning strategy accurately identified the defects of live knots, dead knots, and insect holes. The accuracy of identification was 99.05%, 97.05%, and 99.10%, respectively.

scholarly journals Copper Strip Surface Defect Detection Model Based on Deep Convolutional Neural Network

2021 ◽  
Vol 11 (19) ◽  
pp. 8945
Author(s):  
Yanghuan Xu ◽  
Dongcheng Wang ◽  
Bowei Duan ◽  
Huaxin Yu ◽  
Hongmin Liu
Keyword(s):  
Neural Network ◽  
Transfer Learning ◽  
Surface Defect ◽  
Surface Defects ◽  
Learning Strategy ◽  
Confusion Matrix ◽  
Automatic Detection ◽  
Future Research ◽  
Copper Strip ◽  
Strip Surface

Surface defect automatic detection has great significance for copper strip production. The traditional machine vision for surface defect automatic detection of copper strip needs artificial feature design, which has a long cycle, and poor ability of versatility and robustness. However, deep learning can effectively solve these problems. Therefore, based on the deep convolution neural network and the transfer learning strategy, an intelligent recognition model of surface defects of copper strip is established in this paper. Firstly, the defects were classified in accordance with the mechanism and morphology, and the surface defect dataset of copper strip was established by comprehensively adopting image acquisition and image augmentation. Then, a two-class discrimination model was established to achieve the accurate discrimination of perfect and defect images. On this basis, four CNN models were adopted for the recognition of defect images. Among these models, the EfficientNet model through transfer learning strategy had the best comprehensive performance with a recognition accuracy rate of 93.05%. Finally, the interpretability and deficiency of the model were analysed by the class activation map and confusion matrix, which point toward the direction of further optimization for future research.

scholarly journals Classification of Space Objects by Using Deep Learning with Micro-Doppler Signature Images

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4365
Author(s):  
Kwangyong Jung ◽  
Jae-In Lee ◽  
Nammoon Kim ◽  
Sunjin Oh ◽  
Dong-Wook Seo
Keyword(s):  
Transfer Learning ◽  
Data Augmentation ◽  
Doppler Frequency ◽  
Extraction Methods ◽  
Classification Performance ◽  
Reconstruction Method ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
Space Objects ◽  
Target Characteristics

Radar target classification is an important task in the missile defense system. State-of-the-art studies using micro-doppler frequency have been conducted to classify the space object targets. However, existing studies rely highly on feature extraction methods. Therefore, the generalization performance of the classifier is limited and there is room for improvement. Recently, to improve the classification performance, the popular approaches are to build a convolutional neural network (CNN) architecture with the help of transfer learning and use the generative adversarial network (GAN) to increase the training datasets. However, these methods still have drawbacks. First, they use only one feature to train the network. Therefore, the existing methods cannot guarantee that the classifier learns more robust target characteristics. Second, it is difficult to obtain large amounts of data that accurately mimic real-world target features by performing data augmentation via GAN instead of simulation. To mitigate the above problem, we propose a transfer learning-based parallel network with the spectrogram and the cadence velocity diagram (CVD) as the inputs. In addition, we obtain an EM simulation-based dataset. The radar-received signal is simulated according to a variety of dynamics using the concept of shooting and bouncing rays with relative aspect angles rather than the scattering center reconstruction method. Our proposed model is evaluated on our generated dataset. The proposed method achieved about 0.01 to 0.39% higher accuracy than the pre-trained networks with a single input feature.

AN AI-BASED APPROACH TO ENHANCED FRACTURE RESOLUTION IN IMAGE LOGS

2021 ◽  
Author(s):  
James Howard ◽  
◽  
Joe Tracey ◽  
Mike Shen ◽  
Shawn Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Nearest Neighbor ◽  
Rock Fracture ◽  
Short Interval ◽  
Acoustic Properties ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
Deep Learning Neural Network ◽  
Borehole Image

Borehole image logs are used to identify the presence and orientation of fractures, both natural and induced, found in reservoir intervals. The contrast in electrical or acoustic properties of the rock matrix and fluid-filled fractures is sufficiently large enough that sub-resolution features can be detected by these image logging tools. The resolution of these image logs is based on the design and operation of the tools, and generally is in the millimeter per pixel range. Hence the quantitative measurement of actual width remains problematic. An artificial intelligence (AI) -based workflow combines the statistical information obtained from a Machine-Learning (ML) segmentation process with a multiple-layer neural network that defines a Deep Learning process that enhances fractures in a borehole image. These new images allow for a more robust analysis of fracture widths, especially those that are sub-resolution. The images from a BHTV log were first segmented into rock and fluid-filled fractures using a ML-segmentation tool that applied multiple image processing filters that captured information to describe patterns in fracture-rock distribution based on nearest-neighbor behavior. The robust ML analysis was trained by users to identify these two components over a short interval in the well, and then the regression model-based coefficients applied to the remaining log. Based on the training, each pixel was assigned a probability value between 1.0 (being a fracture) and 0.0 (pure rock), with most of the pixels assigned one of these two values. Intermediate probabilities represented pixels on the edge of rock-fracture interface or the presence of one or more sub-resolution fractures within the rock. The probability matrix produced a map or image of the distribution of probabilities that determined whether a given pixel in the image was a fracture or partially filled with a fracture. The Deep Learning neural network was based on a Conditional Generative Adversarial Network (cGAN) approach where the probability map was first encoded and combined with a noise vector that acted as a seed for diverse feature generation. This combination was used to generate new images that represented the BHTV response. The second layer of the neural network, the adversarial or discriminator portion, determined whether the generated images were representative of the actual BHTV by comparing the generated images with actual images from the log and producing an output probability of whether it was real or fake. This probability was then used to train the generator and discriminator models that were then applied to the entire log. Several scenarios were run with different probability maps. The enhanced BHTV images brought out fractures observed in the core photos that were less obvious in the original BTHV log through enhanced continuity and improved resolution on fracture widths.

scholarly journals Convolutional Neural Network Audio Classifier for Alarm Sound Detection

2019 ◽  
Vol 8 (6) ◽  
pp. 4554-4557
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Short Term Memory ◽  
Sound Recognition ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
Differential Network ◽  
Sound Detection ◽  
Long Short Term Memory ◽  
Lstm Network

Neural Networks (ANN) has evolved through many stages in the last three decades with many researchers contributing in this challenging field. With the power of math complex problems can also be solved by ANNs. ANNs like Convolutional Neural Network (CNN), Deep Neural network, Generative Adversarial Network (GAN), Long Short Term Memory (LSTM) network, Recurrent Neural Network (RNN), Ordinary Differential Network etc., are playing promising roles in many MNCs and IT industries for their predictions and accuracy. In this paper, Convolutional Neural Network is used for prediction of Beep sounds in high noise levels. Based on Supervised Learning, the research is developed the best CNN architecture for Beep sound recognition in noisy situations. The proposed method gives better results with an accuracy of 96%. The prototype is tested with few architectures for the training and test data out of which a two layer CNN classifier predictions were the best.

Unsupervised fabric defect detection based on a deep convolutional generative adversarial network

2019 ◽  
Vol 90 (3-4) ◽  
pp. 247-270 ◽  
Author(s):  
Guanghua Hu ◽  
Junfeng Huang ◽  
Qinghui Wang ◽  
Jingrong Li ◽  
Zhijia Xu ◽  
...  
Keyword(s):  
Defect Detection ◽  
Surface Defects ◽  
Generative Adversarial Network ◽  
Query Image ◽  
Training Strategy ◽  
Fabric Defect Detection ◽  
Adversarial Network ◽  
Fabric Defect ◽  
Pixel Value ◽  
Textured Materials

Detecting and locating surface defects in textured materials is a crucial but challenging problem due to factors such as texture variations and lack of adequate defective samples prior to testing. In this paper we present a novel unsupervised method for automatically detecting defects in fabrics based on a deep convolutional generative adversarial network (DCGAN). The proposed method extends the standard DCGAN, which consists of a discriminator and a generator, by introducing a new encoder component. With the assistance of this encoder, our model can reconstruct a given query image such that no defects but only normal textures will be preserved in the reconstruction. Therefore, when subtracting the reconstruction from the original image, a residual map can be created to highlight potential defective regions. Besides, our model generates a likelihood map for the image under inspection where each pixel value indicates the probability of occurrence of defects at that location. The residual map and the likelihood map are then synthesized together to form an enhanced fusion map. Typically, the fusion map exhibits uniform gray levels over defect-free regions but distinct deviations over defective areas, which can be further thresholded to produce a binarized segmentation result. Our model can be unsupervisedly trained by feeding with a set of small-sized image patches picked from a few defect-free examples. The training is divided into several successively performed stages, each under an individual training strategy. The performance of the proposed method has been extensively evaluated by a variety of real fabric samples. The experimental results in comparison with other methods demonstrate its effectiveness in fabric defect detection.

scholarly journals An Improved SOM-Based Method for Multi-Robot Task Assignment and Cooperative Search in Unknown Dynamic Environments

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3296
Author(s):  
Hongwei Tang ◽  
Anping Lin ◽  
Wei Sun ◽  
Shuqi Shi
Keyword(s):  
Neural Network ◽  
Real Time ◽  
Task Assignment ◽  
Dynamic Environments ◽  
Self Organizing Map ◽  
Cooperative Search ◽  
Dynamic Task ◽  
Locking Mechanism ◽  
Som Neural Network ◽  
Multi Robot

The methods of task assignment and path planning have been reported by many researchers, but they are mainly focused on environments with prior information. In unknown dynamic environments, in which the real-time acquisition of the location information of obstacles is required, an integrated multi-robot dynamic task assignment and cooperative search method is proposed by combining an improved self-organizing map (SOM) neural network and the adaptive dynamic window approach (DWA). To avoid the robot oscillation and hovering issue that occurs with the SOM-based algorithm, an SOM neural network with a locking mechanism is developed to better realize task assignment. Then, in order to solve the obstacle avoidance problem and the speed jump problem, the weights of the winner of the SOM are updated by using an adaptive DWA. In addition, the proposed method can search dynamic multi-target in unknown dynamic environment, it can reassign tasks and re-plan searching paths in real time when the location of the targets and obstacle changes. The simulation results and comparative testing demonstrate the effectiveness and efficiency of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document