Research on the strength of rubber concrete modified with steel fiber and nano-silica at high temperature

2020 ◽  
Vol 27 (2) ◽  
Keyword(s):  
High Temperature ◽  
Steel Fiber ◽  
Nano Silica ◽  
Rubber Concrete

Tensile Properties of Steel Fiber-Reinforced Reactive Powder Concrete after High Temperature

2011 ◽  
Vol 413 ◽  
pp. 270-276 ◽  
Author(s):  
Wen Zhong Zheng ◽  
Hai Yan Li ◽  
Ying Wang ◽  
Heng Yan Xie
Keyword(s):  
Tensile Strength ◽  
High Temperature ◽  
Steel Fiber ◽  
Heating Temperature ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Fiber Reinforced ◽  
Critical Temperatures ◽  
Reactive Powder ◽  
The Relationship

87 prismatic flexural steel fiber-reinforced reactive powder concrete (RPC) specimens with the size of 40mm×40mm×160mm were tested as well as 87 dumbbell-shaped axis tensile RPC specimens after being exposed to different high temperatures. The effect of steel fiber content and heating temperature on the flexural and tensile strength of steel fiber-reinforced RPC was analyzed. With the steel fiber content increasing, the flexural and tensile strength of steel fiber-reinforced RPC after high temperature improve significantly, and they increase first and then decrease with the heating temperature elevated, and the critical temperatures are 200¡æ and 120¡æ, respectively. Equations are established to express the relationship between the flexural and tensile strength of steel fiber-reinforced RPC and the heating temperature. The theoretical curves are in good agreement with the test data.

The Influence on High-Temperature Mechanical Properties of Hybrid-Fiber-Reinforced High-Performance Concrete and Microscopic Analysis

2012 ◽  
Vol 226-228 ◽  
pp. 1709-1713
Author(s):  
Lan Yan ◽  
Y.M. Xing ◽  
Ji Jun Li
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Transition Zone ◽  
High Performance ◽  
Room Temperature ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Interfacial Transition Zone ◽  
Hybrid Fiber ◽  
High Temperature Mechanical Properties

This paper investigated the high temperature mechanical properties of the hybrid fiber reinforced high performance concrete (HFHPC) and normal concrete (NC) .After being subjected to different elevated heating temperatures, two kinds of concretes have been tested for the compressive strength, splitting tensile strength and flexural strength of test specimen at room temperature and 200 °C,400 °C,600 °C,800 °C.Microstructure changes of concrete were also observed by using Scanning Electron Microscopy (SEM) after high temperature. The results show that the hybrid fiber can significantly increase mechanical properties of the concrete at room temperature and high temperature. SEM and XRD analysis shows that there is a permeable diffusion layer in the steel fiber surface because of solid state reaction in the Interfacial Transition Zone of steel fiber and concrete. This permeable diffusion layer is white, bright, serrated and mainly consist of FeSi2 and the complex hydrated calcium silicate. The compounds of this layer change the Interfacial Transition Zone structure, enhance bonding capacity of the steel fiber and matrix, and increase the high temperature mechanical properties of concrete.

scholarly journals Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol.% of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol.% of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance.

2017 ◽  
Keyword(s):  
High Temperature ◽  
Fire Resistance ◽  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Experimental Results ◽  
Explosive Spalling ◽  
Design Strength ◽  
High Temperature Exposure ◽  
Temperature Exposure

scholarly journals Analysis and Prediction of Compressive Properties for Steel Fiber-and-Nanosilica-Reinforced Crumb Rubber Concrete

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Danying Gao ◽  
Tao Zhang ◽  
Yihong Wang ◽  
Yiming Kong ◽  
Dawei Li ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Volume Content ◽  
Steel Fiber ◽  
Crumb Rubber ◽  
Steel Fibers ◽  
Peak Strain ◽  
Compressive Properties ◽  
Crumb Rubber Concrete ◽  
Rubber Concrete

The disposal of waste tire rubber has gained more attention from the viewpoint of green, environmental protection, and sustainability. Numerous attempts have been stated on the properties of crumb rubber concrete (CRC) and observed that there is a large reduction of compressive strength and elastic modulus of CRC with the increase of the rubber substitution rate. Based on the CRC with the crumb rubber volume content of 5%, the steel fibers and nanosilica were added to CRC to make steel fiber-and-nanosilica-reinforced crumb rubber concrete (SFNS-CRC) in this paper. The effects of the steel fiber volume content and nanosilica content on the compressive properties of SFNS-CRC were studied, including compressive strength, elastic modulus, peak strain, compression toughness, and failure pattern. The test results indicated that the modulus of elasticity and compressive strength of SFNS-CRC have the increasing tendency with the addition of steel fibers and nanosilica. Moreover, the peak strains have a significant increase with the increase of the steel fiber content and nanosilica replacement ratio. The compressive stress-strain curves of SFNS-CRC gradually plump with the increase of the steel fibers and nanosilica. Finally, the prediction formulas for the compressive strength, elastic modulus, and peak strain of SFNS-CRC were set up. A simple predicted model of the stress-strain curve for SFNS-CRC was proposed, which considers the effect of steel fibers and nanosilica.

Development of fly ash/slag based self-compacting geopolymer concrete using nano-silica and steel fiber

2019 ◽  
Vol 211 ◽  
pp. 271-283 ◽  
Author(s):  
Mehmet Eren Gülşan ◽  
Radhwan Alzeebaree ◽  
Ayad Ali Rasheed ◽  
Anıl Niş ◽  
Ahmet Emin Kurtoğlu
Keyword(s):  
Fly Ash ◽  
Steel Fiber ◽  
Geopolymer Concrete ◽  
Nano Silica
Sign in / Sign up

Export Citation Format

Share Document