scholarly journals Effects of Acidic Beverages on Color Stability of Bulk-Fill Composites with Different Viscosities

2021 ◽  
pp. 338-347
Author(s):  
Soner Şişmanoğlu ◽  
Görkem Sengez
Keyword(s):  
Orange Juice ◽  
Color Change ◽  
Color Space ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Difference ◽  
Composite Resins ◽  
Distilled Water ◽  
Acidic Beverages

The aim of this in vitro study is to investigate the effects of acidic beverages on the discoloration of bulk-fill composites with different viscosities. 144 disc-shaped specimens (8mm diameter × 2mm thick) were prepared from four different composite resins including a nanohybrid (Filtek Ultimate), two packable bulk-fill (Filtek Bulk Fill, Tetric N Ceram Bulk Fill), and a flowable bulk-fill composite (Tetric N Flow Bulk Fill). The specimens of each group were divided into 3 subgroups and submerged in distilled water, orange juice and coke (n=12). Color difference (∆E) were measured using CIELab color space and a compact spectrophotometer (VITA Easyshade) at baseline and after 30 days of immersion. Data were analyzed using two-way ANOVA and Tukey's HSD post-hoc tests (P<0.05). Two-way ANOVA revealed that both material type and staining solution significantly influenced ∆E values (P<0.001). Immersion in orange juice resulted in greater and significant discoloration over time in comparison to distilled water and coke (P<0.05). Tetric N Ceram (∆E=7.0) and Tetric N Flow (∆E=7.7) bulk-fill restoratives showed highest color change values after 30 days of immersion in orange juice. This study suggests that a discoloration above the clinically acceptable threshold (∆E>2.7) was observed for all bulk-fill composites tested. It can be speculated that orange juice has a more negative effect on the color stability compared to coke. Additionally, flowable bulk-fill composite was more prone to discoloration than condensable bulk-fill composites.

scholarly journals Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Sayna Shamszadeh ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Elham Hasani ◽  
Ahmad Najafi Abrandabadi ◽  
Narges Panahandeh
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Imaging System ◽  
Water Immersion ◽  
Color Space ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Changes ◽  
Post Hoc

We aimed to evaluate the color stability of bulk-fill and conventional composite resin with respect to thickness and storage media. Twenty specimens of a conventional composite resin (6 mm diameter and 2 mm thick) and 40 specimens of the bulk-fill Tetric EvoCeram composite resin at two different thicknesses (6 mm diameter and 2 mm thick or 4 mm thick,n=20) were prepared. The specimens were stored in distilled water during the study period (28 d). Half of the specimens were remained in distilled water and the other half were immersed in coffee solution 20 min/d and kept in distilled water between the cycles. Color changes (ΔE) were measured using the CIEL⁎a⁎b⁎color space and a digital imaging system at 1, 7, 14, and 28 days of storage. Data were analyzed using Two-way ANOVA and Tukey’s HSD post hoc test (P<0.05). Composite resins showed significant increase in color changes by time (bulk-fill > conventional;P<0.001). Coffee exhibited significantly more staining susceptibility than that of distilled water (P<0.001). There was greater color changes with increasing the increment thickness, which was significant at 14 (P<0.001) and 28 d (P<0.01). Color change of bulk-fill composite resin was greater than that of the conventional one after coffee staining and is also a function of increment thicknesses.

scholarly journals Color Stability of Bulk Fill Composite Resins Submitted to Coffee Staining

2020 ◽  
Vol 24 (1) ◽  
Author(s):  
Beatriz Maria Arruda ◽  
Julio Cesar Bassi ◽  
Rafael Pino Vitti ◽  
Renata Siqueira Scatolin
Keyword(s):  
Analysis Of Variance ◽  
Composite Resin ◽  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Composite Resins ◽  
Vitro Study ◽  
Change Analysis ◽  
Cie Lab

 Objective: The aim of this in vitro study was to evaluate the color stability of different bulk fill composite resins after extrinsic staining with coffee. Material and methods: Forty-eight disk-shaped specimens (6 mm diameter x 2 mm thick) of each composite resin were prepared for color change test. The composite resins were divided into 4 groups (n=12): one conventional composite resin (Filtek Z250) and three bulk-fill composite resins (Filtek Bulk Fill, Aura Bulk Fill, and Opus Bulk Fill). The samples were stained with 20 mL coffee solution for 7 days, with the solution being replaced every 24 h. The color change analysis was performed using a spectrophotometer, according to the CIE Lab formula. Data were analyzed using the Analysis of variance (ANOVA) and Tukey HSD tests (?=0.05). Results: The results revealed significant differences in color change among the composite resins tested (?<0.0001). The Aura Bulk Fill and Opus Bulk Fill showed the highest color change values. Conclusions: Thus, all the resins analyzed were susceptible to extrinsic staining with coffee, and the Filtek Bulk Fill showed the lowest color change value.

scholarly journals Color Stability of Composites After Short-term Oral Simulation: An in vitro Study

2016 ◽  
Vol 10 (1) ◽  
pp. 431-437 ◽  
Author(s):  
Didem Öner Özdaş ◽  
Mağrur Kazak ◽  
Aylin Çilingir ◽  
Meryem Gülce Subaşı ◽  
Murat Tiryaki ◽  
...  
Keyword(s):  
Repeated Measures ◽  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Black Tea ◽  
Composite Resins ◽  
Pomegranate Juice ◽  
Restorative Materials ◽  
Color Alteration

Background:Although most of the studies investigated color stability of different restorative materials, evaluation of color stability of composites after immersion in multiple beverages in the same day by anin vitrooral simulation study is unclear.Objective:To assess color change of different restorative materials at the end of days 1, 14, and 30 of immersion in multiple liquid types to mimic the oral environmentin vitro.Method:Ten disc-shaped specimens were made from each of four different resin composites (Filtek Z250, Voco x-tra base, Beautifil Flow Plus, Beautifil II). Baseline color value of each sample was measured using a spectrophotometer. Each composite was respectively immersed in coffee, an orange/pomegranate juice mixture, black tea, and a mouth rinse on the same day to mimic daily liquid consumption of individuals. Color measurements were taken after 1, 14, and 30 days by spectrophotometer and color change values were calculated. Statistical analyses were executed by one-way ANOVA/Tukey HSD and repeated-measures ANOVA.Results:All materials showed significant color change after 1, 14, and 30 days (P< 0.01) of immersion in liquids, with the lowest color alteration observed at the 1stday and the highest observed after the 30thday. Among the materials tested, at each time point (1, 14, and 30 days), the lowest color alteration was detected in Filtek Z250 and the highest color alteration was detected in Beautifil II.Conclusion:Color alteration of composite resins is affected by composite type and storage time. With the exception of 1 day of storage, color changes of all materials were substantial and clinically unacceptable.

scholarly journals Effect of bleaching protocols on surface roughness and color change of high- and low-viscosity bulk-fill composite resins.

2020 ◽  
Vol 33 (2) ◽  
pp. 59-68
Author(s):  
Bruna Tavares ◽  
Fabiana França ◽  
Roberta Basting ◽  
Basting Turssi ◽  
Turssi Amaral
Keyword(s):  
Surface Roughness ◽  
Composite Resin ◽  
Color Change ◽  
In Vitro Study ◽  
High Viscosity ◽  
Composite Resins ◽  
Distilled Water ◽  
Water Control ◽  
Low Viscosity

The aim of this in vitro study was to evaluate the effect of bleaching protocols on the surface roughness (Ra), color change and surface micromorphology of a low-viscosity bulk-fill composite (Filtek Bulk Fill Flow, 3M ESPE), a highviscosity bulk-fill composite (Filtek Bulk Fill, 3M ESPE) and a conventional nanoparticulate composite resin (control) (Filtek Z350 XT, 3M ESPE). Forty samples of each composite (disks 5 mm in diameter and 2 mm thick) were randomly divided into four groups (n=10), according to bleaching protocol: a) 10% carbamide peroxide gel (Opalescence, Ultradent Products) (2 h/ day, for 14 days); b) 40% hydrogen peroxide gel (Opalescence Boost, Ultradent Products) (three bleaching sessions, once a week, 45 min/session); c) whitening rinse (Listerine Whitening Extreme, Johnson & Johnson) (2 min/day, for 14 days); and d) distilled water (control). The samples were submitted to triplicate readings (Ra and color [CIELAB parameters]) before and after contact with bleaching protocols. Micromorphology was analyzed in a scanning electron microscope (SEM). Ra and color parameters (ΔL, Δa, Δb and ΔE) were analyzed by generalized linear models (α=0.05). The Ra of the high-viscosity bulk-fill was significantly higher than that of the other composites (p<0.05). Ra increased significantly (p<0.05) and surface became more irregular (SEM analysis) in all the composite resins, regardless of the bleaching protocol (p<0.05). The high-viscosity bulk-fill composite resin group had significantly lower ΔE (p<0.05) than the nanoparticulate composite resin group immersed in distilled water. It was concluded that the characteristics of each resin significantly influenced the Ra more than the bleaching protocol. The high-viscosity bulk-fill resin presented minor color change.

scholarly journals Color change using HSB color system of dental resin composites immersed in different common Amazon region beverages

2009 ◽  
Vol 39 (4) ◽  
pp. 961-968 ◽  
Author(s):  
Débora da Costa e Silva ◽  
Sanmya Beatriz da Silva Pereira Tiradentes ◽  
Rosana Cristina Pereira Parente ◽  
Maria Fulgência Costa Lima Bandeira
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Amazon Region ◽  
Composite Resins ◽  
Distilled Water ◽  
Resin Composites ◽  
Dental Resin ◽  
Color System ◽  
Initial Color

The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.

scholarly journals Effect of brushing on colour stability of nanohybrid composite after immersion in brewed beverages – an in vitro study

2021 ◽  
Author(s):  
Jayeeta Verma ◽  
Leena Padhye ◽  
Sidharth Verma
Keyword(s):  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Distilled Water ◽  
Staining Solution ◽  
Significant Difference ◽  
Nanohybrid Composite ◽  
Powered Toothbrush ◽  
Disk Sample

Background and aims. In today’s world, everyone is mindful of one’s appearance and appreciates aesthetics. Of the various restorative materials available, composites are considered as the most aesthetic with good color stability. This study aims at finding the effect of brushing  on the color stability of nanohybrid composite after being immersed in various beverages. Methods. Thirty disk specimens were prepared for each staining solution (N=30), with a total of 90 specimens. The disk specimens for each staining solution were then sub divided into 2 groups (N=15): brushing and non-brushing. After preparation, the specimens were soaked in distilled water for 24 hours in separate containers. Baseline color of the samples was evaluated using spectrophotometer. The samples were then immersed in tea, coffee or water. The groups of samples to be brushed were held in the mold and 20 strokes of brushing using an electronically powered toothbrush were done on each side of the disk sample. The color was re-evaluated after a period of 14 days. Results. When comparing among the three beverages, tea showed the highest ΔE*ab indicating greatest discoloration when compared to coffee and water. This can be graded as tea > coffee > water. However, statistically there was no significant difference between tea and coffee. When compared within tea, coffee, or water specimens the non - brushed specimens showed greater discoloration compared to the brushed specimens both clinically and statistically. Conclusion. When immersing the specimens in the solutions, tea showed more color change compared to coffee, making the specimens clinically unacceptable. However, brushing the specimens reduced the discoloration when compared to non–brushing, making the coffee specimens clinically acceptable.

scholarly journals Influence of UV Radiation on the Color Change of the Surface of Steamed Maple Wood with Saturated Water Steam

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 217
Author(s):  
Ladislav Dzurenda ◽  
Michal Dudiak ◽  
Eva Výbohová
Keyword(s):  
Uv Radiation ◽  
Color Change ◽  
Color Space ◽  
Color Stability ◽  
Color Difference ◽  
Saturated Steam ◽  
Water Steam ◽  
Saturated Water ◽  
Red Color ◽  
Uv Lamp

The wood of maple (Acer Pseudopatanus L.) was steamed with a saturated steam-air mixture at a temperature of t = 95 °C or saturated steam at t = 115 °C and t = 135 °C, in order to give a pale pink-brown, pale brown, and brown-red color. Subsequently, samples of unsteamed and steamed maple wood were irradiated with a UV lamp in a Xenotest Q-SUN Xe-3-H after drying, in order to test the color stability of steamed maple wood. The color change of the wood surface was evaluated by means of measured values on the coordinates of the color space CIE L* a* b*. The results show that the surface of unsteamed maple wood changes color markedly under the influence of UV radiation than the surface of steamed maple wood. The greater the darkening and browning color of the maple wood by steaming, the smaller the changes in the values at the coordinates L*, a*, b* of the steamed maple wood caused by UV radiation. The positive effect of steaming on UV resistance is evidenced by the decrease in the overall color difference ∆E*. While the value of the total color diffusion of unsteamed maple wood induced by UV radiation is ∆E* = 18.5, for maple wood steamed with a saturated steam-air mixture at temperature t = 95 °C the ∆E* decreases to 12.6, for steamed maple wood with saturated water steam with temperature t = 115 °C the ∆E* decreases to 10.4, and for saturated water steam with temperature t = 135 °C the ∆E* decreases to 7.2. Differential ATR-FTIR spectra declare the effect of UV radiation on unsteamed and steamed maple wood and confirm the higher color stability of steamed maple wood.

scholarly journals Effect of Hydrothermal Aging and Beverages on Color Stability of Lithium Disilicate and Zirconia Based Ceramics

Medicina ◽  
2019 ◽  
Vol 55 (11) ◽  
pp. 749 ◽  
Author(s):  
Satheesh B. Haralur ◽  
Noura Raqe S. Alqahtani ◽  
Fatimah Alhassan Mujayri
Keyword(s):  
Green Tea ◽  
In Vitro Study ◽  
Color Stability ◽  
Lithium Disilicate ◽  
Color Difference ◽  
Hydrothermal Aging ◽  
Monolithic Zirconia ◽  
Post Hoc ◽  
Coloring Agents

Background and aim: All-ceramic prosthesis is widely used in modern dental practice because of its improved physico-mechanical and optical properties. These restorations are exposed to coloring agents from various nutrition and beverages in the oral cavity. Long-term color stability is critical for the success of these restorative materials. The purpose of this in vitro study was to assess the effect of common beverages and mouthwash on the color stability of lithium disilicate (LD), monolithic zirconia (MZ) and bilayer zirconia (BZ) surfaces. Material and methods: Thirty disc-shaped specimens from each material were fabricated; each group was subdivided (n = 10) according to coffee, green tea and chlorhexidine immersion solutions. The baseline color of ceramic discs was recorded according to the CIE L*a*b* system with a portable spectrophotometer. The second measurement was recorded after 3000 thermocycling and immersion in coloring agents for 7 days. The mean color difference was calculated and data were compared with Kruskal-Wallis and Mann-Whitney post hoc tests (0.05). Results: ΔE values for LD with the immersion of coffee, tea, and Chlorhexidine gluconate (CHG) were 1.78, 2.241 and 1.58, respectively. Corresponding ΔE values for MZ were 5.60, 5.19, and 4.86; marginally higher than the clinically acceptable level of 3.5. Meanwhile, BZ showed better color stability compared to MZ with ΔE values of 4.22, 2.11 and 1.43. Conclusion: Among the ceramics evaluated, LD ceramic was found to be more color stable, while MZ ceramics displayed a higher susceptibility to discoloration. MZ and BZ ceramic colors were significantly altered with coffee immersion, while LD ceramics were more affected by green tea.

scholarly journals The Effect of Outdoor Weathering on Color Stability of Silicone and Acrylic Resin, Pigments-A Comparative Evaluation: An in vitro Study

2015 ◽  
Vol 5 (3) ◽  
pp. 81-85
Author(s):  
K Lekha ◽  
H Dharanendra Kumar
Keyword(s):  
Comparative Evaluation ◽  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Acrylic Resin ◽  
Silicone Elastomer ◽  
Heat Cure ◽  
Outdoor Weathering ◽  
Cobalt Blue

ABSTRACT Maxillofacial prosthetic materials either resin or elastomer used for the fabrication of facial prostheses have their own physical and mechanical properties. Maxillofacial prosthesis frequent replacement because the elastomer or acrylic resin and its pigments undergo color changes. Purpose Evaluate the effect of outdoor weathering on color stability of silicone and heat-cure acrylic with two different pigments. Materials and methods Total of 80 circular disk specimens, 40 silicone elastomer and 40 heat-cure clear acrylic resin were fabricated in the prepared mold and two dry earth pigments burnt sienna and cobalt blue was added to the specimens and it was subjected to simulated outdoor weathering. Before and after weathering, CIE values of both control and weathering groups were recorded by using spectrophotometer and tabulated. The obtained data were subjected to statistical analysis. Results Silicone elastomer with burnt sienna showed more color change when exposed to weathering followed by silicone with cobalt blue. Heat-cure with cobalt blue had shown some color change, heat-cure and burnt sienna were the most color stable. Conclusion From the study, it can be concluded that heat-cure acrylic resin with burnt sienna most color stable than silicone elastomer. How to cite this article Lekha K, Kumar HD, Meshramkar R, Nadiger RK. The Effect of Outdoor Weathering on Color Stability of Silicone and Acrylic Resin, Pigments-A Comparative Evaluation: An in vitro Study. Int J Prosthodont Restor Dent 2015;5(3):81-85.

scholarly journals In Vitro Evaluation of Physical and Mechanical Properties of Light-Curing Resin Cement: A Comparative Study

2020 ◽  
Vol 14 (01) ◽  
pp. 152-156
Author(s):  
Luís Felipe Espíndola-Castro ◽  
Oscar Felipe Fonseca de Brito ◽  
Larissa Gabrielle Assis Araújo ◽  
Izabella Luiza Aragão Santos ◽  
Gabriela Queiroz De Melo Monteiro
Keyword(s):  
Color Change ◽  
Surface Hardness ◽  
Color Stability ◽  
Resin Cement ◽  
The Other ◽  
Distilled Water ◽  
Water Control ◽  
Mean Values ◽  
Significance Level

Abstract Objective The aim of study was to evaluate in vitro the surface hardness, sorption, solubility, and color stability of three light-cured resin cements, namely RelyX Veneer (RLX), Variolink Veneer (VLK), and All Cem Veneer (ACV). Materials and Methods Cylindrical samples (15 × 1 mm) were made for each group using a metallic mold (n = 10). Vickers microhardness test was performed, and average hardness was calculated from three indentations (300 gf/15s) per sample. The sorption and solubility of the materials were evaluated according to ISO 4049:2009 based on three samples weighing: initial (m 1), after immersion in distilled water for 7 days (m 2), and final (after removal of all moisture [m 3]). The color change was observed using a digital spectrophotometer, at three different time points, baseline, 1 day, and 1 week of immersion in coffee and distilled water (control). Statistical Analysis Shapiro–Wilk test was used to analyze the normality of the data, and groups were compared using Kruskal–Wallis and Mann–Whitney tests. A significance level of 5% was used. Results RLX showed the highest microhardness mean values (36.96 VHN), but higher sorption (23.2 µg/mm3) and solubility (2.40 µg/mm3), with statistically significant differences with the other groups. For color stability, higher ∆E was observed for the samples immersed in coffee (p = 0.009). The VLK resin cement presented statistically significant differences from the other groups, with higher color changes in coffee at 1 day (15.14) and after 1 week (23.65). Conclusion RLX resin cement showed better hardness results. All materials tested performed satisfactorily for sorption and solubility according to ISO 4049:2009. All materials showed high-staining values after 1 week of immersion in coffee.

Sign in / Sign up

Export Citation Format

Share Document