First-Principles Study of Helical Silver Single-Wall Nanotubes and Nanowires

2005 ◽  
Vol 900 ◽  
Author(s):  
Shelly L. Elizondo ◽  
John W. Mintmire
Keyword(s):  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Catalytic Properties ◽  
Local Density ◽  
High Symmetry ◽  
Graphite Sheet ◽  
Preliminary Study ◽  
Single Wall Nanotubes ◽  
Special Case

ABSTRACTWe investigate the electronic structures of extended helical silver single-wall nanotubes (AgSWNTs). Because these helical nanotubes are essentially comprised of n-atom strands winding about the nanotube's axis, we systematically examine, strand by strand, the electronic properties and the number of conduction channels associated with these structures. Herein, we study a special case of high-symmetry nanotubes. Nanotubes with sufficiently large radii were also calculated with a silver atomic chain inserted along the nanotube's axis. The analysis is carried out within a first-principles, all-electron self-consistent local density functional approach (LDF) adapted for helical symmetry. Modeling helical silver (or gold) single-wall nanotubes entails rolling up a sheet of atoms and mapping the atoms onto the surface of a cylinder, comparable to rolling up a graphite sheet for a carbon nanotube. It is well known that controlling the size and shape of silver and gold nanostructures results in the ability to tailor the optical and catalytic properties of these materials. In this preliminary study, we consider changes in the electronic structures of these materials as each nanotube is built strand by strand.

Possidle Isomers and Electronic Structure of C60H36

1990 ◽  
Vol 206 ◽  
Author(s):  
B. I. Dunlap ◽  
D. W. Brenner ◽  
R. C. Mowrey ◽  
J. W. Mintmire ◽  
D. H. Robertson ◽  
...  
Keyword(s):  
Electronic Structure ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
High Symmetry ◽  
Hydrogen Atoms ◽  
Functional Methods ◽  
Metastable Structure ◽  
Total Energies ◽  
Rice University

ABSTRACTNewly developed empirical hydrocarbon potentials and self-consistent first-principles local density functional methods are used to investigate possible isomers and the electronic structure of C60H36. Within the high symmetry Th structure conjectured by the groups at Rice University there are two inequivalent sets of hydrogen atoms containing twelve and twenty-four atoms respectively. Binding each set either inside or outside of the C60 cage leads to four isomers of C60H36 with inequivalent strain energies. Although we find that placing twelve hydrogens inside the cage can lead to a metastable structure, our calculated total energies suggest that the isomer with all the hydrogens on the outside of the cage is the energetically most stable.

Electronic Structure of Fullerene Tubules

1992 ◽  
Vol 247 ◽  
Author(s):  
J. W. Mintmire ◽  
D. H. Robertson ◽  
B. I. Dunlap ◽  
R. C. Mowrey ◽  
D. W. Brenner ◽  
...  
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Tight Binding ◽  
Small Diameter ◽  
High Symmetry ◽  
Binding Model ◽  
High Carrier ◽  
Reasonable Description ◽  
Gaussian Orbital

ABSTRACTRecent reports suggest that graphitic tubules with diameters on the order of fullerene diameters have been synthesized. Such small-diameter tubules should have electronic properties related to those of two-dimensional graphite. We demonstrate by comparison with results from a first-principles, self-consistent, all-electron Gaussian-orbital based local-density functional approach that an all-valence tight-binding model can be expected to give a reasonable description of the electronic states of these tubules. In analyzing both high-symmetry tubules and lower-symmetry chiral tubules, we see that a relatively high carrier density could be expected for many of these structures.

Structural Phase Transition and Electronic Properties of MgCe under High Pressure from First-Principles Calculations

2014 ◽  
Vol 577 ◽  
pp. 102-107
Author(s):  
Qiu Xiang Liu ◽  
De Ping Lu ◽  
Rui Jun Zhang ◽  
Lei Lu ◽  
Shi Fang Xie
Keyword(s):  
Phase Transition ◽  
Ground State ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
High Pressures ◽  
Local Density ◽  
Structural Phase ◽  
First Principles Calculations ◽  
Functional Theory

The structural stability of MgCe under high pressures has been investigated by using the first-principles plane-wave pseudopotential density functional theory within the local density approximation (LDA). The obtained results predict that MgCe in the Ba structure is predicted to be the most stable structure corresponding to the ground state, because of lowest total energy. MgCe undergoes a pressure-induced phase transition from the Ba structure to B32 structure at 36 GPa. And no further transition is found up to 120 GPa. In addition, the electronic structures of four structures of MgCe are also calculated and discussed.

AB INITIO CALCULATION OF THE LATTICE DYNAMICS OF THE ZnSe1-xTex ALLOY

2009 ◽  
Vol 23 (29) ◽  
pp. 3453-3462
Author(s):  
K. BOUAMAMA ◽  
P. DJEMIA ◽  
N. LEBGA ◽  
K. KASSALI
Keyword(s):  
First Principles ◽  
High Frequency ◽  
Lattice Dynamics ◽  
Density Functional ◽  
Local Density ◽  
High Symmetry ◽  
First Principles Calculations ◽  
Symmetry Point ◽  
Virtual Crystal Approximation ◽  
Density Functional Perturbation Theory

The lattice dynamics of the ternary ZnSe 1-x Te x alloy have been studied using first-principles calculations. These are done using the density-functional perturbation theory (DFPT) within the local density approximation (LDA) and employing the virtual-crystal approximation (VCA). We study the variation of the optical phonon frequencies (ω TO and ω LO ), the high-frequency dielectric coefficient (ε∞) and the dynamic effective charge (Z*) as a function of the composition (x). We found that the ω TO and ω LO follow a quadratic law in x and agree well with the experiment which proves that the VCA is a reliable method for mixed modes determination (2 bonds-1 mode). The obtained ε∞ and Z* have a quadratic form with x. We have also predicted the behavior of the optical and acoustical phonons with x at the high symmetry point X and L.

scholarly journals Comparative Study on Electronic Structure and Optical Properties of α-Fe2O3, Ag/α-Fe2O3 and S/α-Fe2O3

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 424
Author(s):  
Cuihua Zhao ◽  
Baishi Li ◽  
Xi Zhou ◽  
Jianhua Chen ◽  
Hongqun Tang
Keyword(s):  
Optical Properties ◽  
Optical Absorption ◽  
Electronic Structures ◽  
Density Functional ◽  
Peak Strength ◽  
Visible Range ◽  
High Symmetry ◽  
Functional Theory ◽  
Optical Absorption Peak ◽  
Calculation Results

The electronic structures and optical properties of pure, Ag-doped and S-doped α-Fe2O3 were studied using density functional theory (DFT). The calculation results show that the structure of α-Fe2O3 crystal changes after Ag and S doping, which leads to the different points of the high symmetry of Ag-doped and S-doped α-Fe2O3 with that of pure α-Fe2O3 in the energy band, as well as different Brillouin paths. In addition, the band gap of α-Fe2O3 becomes smaller after Ag and S doping, and the optical absorption peak shifts slightly toward the short wavelength, with the increased peak strength of S/α-Fe2O3 and the decreased peak strength of Ag/α-Fe2O3. However, the optical absorption in the visible range is enhanced after Ag and S doping compared with that of pure α-Fe2O3 when the wavelength is greater than 380 nm, and the optical absorption of S-doped α-Fe2O3 is stronger than that of Ag-doped α-Fe2O3.

The Quantum Length Dependence of Conductance in Molecular Device: An Ab Initio Study

2010 ◽  
Vol 663-665 ◽  
pp. 519-522
Author(s):  
Cai Juan Xia ◽  
Han Chen Liu ◽  
Ying Tang Zhang
Keyword(s):  
Electronic Transport ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Molecular Device ◽  
Functional Theory ◽  
Length Dependence ◽  
Molecular Conductance ◽  
Homo Lumo ◽  
Molecular Compounds

By Applying Nonequilibrium Green’s Function Formalism Combined First-Principles Density Functional Theory, we Investigate the Electronic Transport Properties of Thiophene and Furan Molecules with Different Quantum Length. the Influence of HOMO-LUMO Gaps and the Spatial Distributions of Molecular Orbitals on the Electronic Transport through the Molecular Device Are Discussed in Detail. the Results Show that the Transport Behaviors Are Determined by the Distinct Electronic Structures of the Molecular Compounds. the Length Dependence of Molecular Conductance Exhibits its Diversity for Different Molecules.

Magnetic Properties of Embedded Rh Clusters in Ni Matrix

1995 ◽  
Vol 384 ◽  
Author(s):  
Zhi-Qiang Li ◽  
Yuichi Hashi ◽  
Jing-Zhi Yu ◽  
Kaoru Ohno ◽  
Yoshiyuki Kawazoe
Keyword(s):  
Magnetic Properties ◽  
Electronic Structure ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Magnetic Moments ◽  
Functional Formalism ◽  
Rhodium Clusters ◽  
Spin Polarized ◽  
Local Density Functional

ABSTRACTThe electronic structure and magnetic properties of rhodium clusters with sizes of 1 - 43 atoms embedded in the nickel host are studied by the first-principles spin-polarized calculations within the local density functional formalism. Single Rh atom in Ni matrix is found to have magnetic moment of 0.45μB. Rh13 and Rhl 9 clusters in Ni matrix have lower magnetic moments compared with the free ones. The most interesting finding is tha.t Rh43 cluster, which is bulk-like nonmagnetic in vacuum, becomes ferromagnetic when embedded in the nickel host.

Electronic structure of the thermoelectric materials PbTe and AgPb18SbTe20 from first-principles calculations

2010 ◽  
Vol 25 (6) ◽  
pp. 1030-1036 ◽  
Author(s):  
Pengxian Lu ◽  
Zigang Shen ◽  
Xing Hu
Keyword(s):  
Band Structure ◽  
Thermoelectric Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Partial Density ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Scanning Transmission ◽  
Linearized Augmented Plane Wave

To investigate the effects of substituting Ag and Sb for Pb on the thermoelectric properties of PbTe, the electronic structures of PbTe and AgPb18SbTe20 were calculated by using the linearized augmented plane wave based on the density-functional theory of the first principles. By comparing the differences in the band structure, the partial density of states (PDOS), the scanning transmission microscope, and the electron density difference for PbTe and AgPb18SbTe20, we explained the reason from the aspect of electronic structures why the thermoelectric properties of AgPb18SbTe20 could be improved significantly. Our results suggest that the excellent thermoelectric properties of AgPb18SbTe20 should be attributed in part to the narrowing of its band gap, band structure anisotropy, the much extrema and large DOS near Fermi energy, as well as the large effective mass of electrons. Moreover, the complex bonding behaviors for which the strong bonds and the weak bonds are coexisted, and the electrovalence and covalence of Pb–Te bond are mixed should also play an important role in the enhancement of the thermoelectric properties of the AgPb18SbTe20.

Structural, elastic and thermodynamic properties of A15-type compounds V3X (X = Ir, Pt and Au) from first-principles calculations

2016 ◽  
Vol 30 (35) ◽  
pp. 1650414 ◽  
Author(s):  
Mingliang Wang ◽  
Zhe Chen ◽  
Dong Chen ◽  
Cunjuan Xia ◽  
Yi Wu
Keyword(s):  
Thermodynamic Properties ◽  
Debye Temperature ◽  
First Principles ◽  
Density Functional ◽  
Coefficient Of Thermal Expansion ◽  
Local Density ◽  
Debye Model ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Experimental Values

The structural, elastic and thermodynamic properties of the A15 structure V3Ir, V3Pt and V3Au were studied using first-principles calculations based on the density functional theory (DFT) within generalized gradient approximation (GGA) and local density approximation (LDA) methods. The results have shown that both GGA and LDA methods can process the structural optimization in good agreement with the available experimental parameters in the compounds. Furthermore, the elastic properties and Debye temperatures estimated by LDA method are typically larger than the GGA methods. However, the GGA methods can make better prediction with the experimental values of Debye temperature in V3Ir, V3Pt and V3Au, signifying the precision of the calculating work. Based on the E–V data derived from the GGA method, the variations of the Debye temperature, coefficient of thermal expansion and heat capacity under pressure ranging from 0 GPa to 50 GPa and at temperature ranging from 0 K to 1500 K were obtained and analyzed for all compounds using the quasi-harmonic Debye model.

Probing the electronic structures of Con (n = 1–5) clusters on γ-Al2O3 surfaces using first-principles calculations

2017 ◽  
Vol 19 (5) ◽  
pp. 3679-3687 ◽  
Author(s):  
Tao Yang ◽  
Masahiro Ehara
Keyword(s):  
Density Functional Theory ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
First Principles Calculations ◽  
Functional Theory

Using density functional theory calculations, we discussed the geometric and electronic structures and nucleation of small Co clusters on γ-Al2O3(100) and γ-Al2O3(110) surfaces.

Sign in / Sign up

Export Citation Format

Share Document