Biodegradable Nano-Material Composites for Use in an Inkjet Printing System

2006 ◽  
Vol 921 ◽  
Author(s):  
Nicole H Levi ◽  
John B. McGuirt ◽  
Faith M. Coldren ◽  
David L. Carroll

AbstractBiomaterials for development of resorbable, three-dimensional tissue scaffolds have been used in a modified thermal inkjet printing system to explore compatibility of materials, solvents and the printing system. The polymers included collagen (type I), sodium alginate, fibronectin, poly-lactic co-glycolic acid (PLGA), polyethylene glycol (PEG), and tetraglycol were tested. Single-walled carbon nanotubes were combined with the biopolymers to determine which systems in which they would blend well, and be able to print. Uncovering which biopolymers may be printed together offers insight into development of materials which most closely match the properties of biological tissue.

2003 ◽  
Vol 26 (4) ◽  
pp. 319-330 ◽  
Author(s):  
S. Marlovits ◽  
B. Tichy ◽  
M. Truppe ◽  
D. Gruber ◽  
W. Schlegel

This study describes the culture and three-dimensional assembly of aged human articular chondrocytes under controlled oxygenation and low shear stress in a rotating-wall vessel. Chondrocytes cultured in monolayer were released and placed without any scaffold as a single cell suspension in a rotating bioreactor for 12 weeks. Samples were analyzed with immunohistochemistry, molecular biology and electron microscopy. During serial monolayer cultures chondrocytes dedifferentiated to a “fibroblast-like” structure and produced predominantly collagen type I. When these dedifferentiated cells were transferred to the rotating bioreactor, the cells showed a spontaneous aggregation and formation of solid tissue during the culture time. Expression of collagen type II and other components critical for the extracellular cartilage matrix could be detected. Transmission electron microscopy revealed a fine network of randomly distributed collagen fibrils. This rotating bioreactor proves to be a useful tool for providing an environment that enables dedifferentiated chondrocytes to redifferentiate and produce a cartilage-specific extracellular matrix.


2011 ◽  
Vol 236 (11) ◽  
pp. 1333-1341 ◽  
Author(s):  
Giuseppe Musumeci ◽  
Debora Lo Furno ◽  
Carla Loreto ◽  
Rosario Giuffrida ◽  
Silvia Caggia ◽  
...  

The present study focused on the isolation, cultivation and characterization of human mesenchymal stem cells (MSCs) from adipose tissue and on their differentiation into chondrocytes through the NH ChondroDiff medium. The main aim was to investigate some markers of biomechanical quality of cartilage, such as lubricin, and collagen type I and II. Little is known, in fact, about the ability of chondrocytes from human MSCs of adipose tissue to generate lubricin in three-dimensional (3D) culture. Lubricin, a 227.5-kDa mucinous glycoprotein, is known to play an important role in articular joint physiology, and the loss of accumulation of lubricin is thought to play a role in the pathology of osteoarthritis. Adipose tissue is an alternative source for the isolation of multipotent MSCs, which allows them to be obtained by a less invasive method and in larger quantities than from other sources. These cells can be isolated from cosmetic liposuctions in large numbers and easily grown under standard tissue culture conditions. 3D chondrocytes were assessed by histology (hematoxylin and eosin) and histochemistry (Alcian blue and Safranin-O/fast green staining). Collagen type I, II and lubricin expression was determined through immunohistochemistry and Western blot. The results showed that, compared with control cartilage and monolayer chondrocytes showing just collagen type I, chondrocytes from MSCs (CD44-, CD90- and CD105- positive; CD45-, CD14- and CD34-negative) of adipose tissue grown in nodules were able to express lubricin, and collagen type I and II, indicative of hyaline cartilage formation. Based on the function of lubricin in the joint cavity and disease and as a potential therapeutic agent, our results suggest that MSCs from adipose tissue are a promising cell source for tissue engineering of cartilage. Our results suggest that chondrocyte nodules producing lubricin could be a novel biotherapeutic approach for the treatment of cartilage abnormalities.


Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2784
Author(s):  
Mh Busra Fauzi ◽  
Zahra Rashidbenam ◽  
Aminuddin Bin Saim ◽  
Ruszymah Binti Hj Idrus

Three-dimensional (3D) in vitro skin models have been widely used for cosmeceutical and pharmaceutical applications aiming to reduce animal use in experiment. This study investigate capability of ovine tendon collagen type I (OTC-I) sponge suitable platform for a 3D in vitro skin model using co-cultured skin cells (CC) containing human epidermal keratinocytes (HEK) and human dermal fibroblasts (HDF) under submerged (SM) and air-liquid interface (ALI) conditions. Briefly, the extracted OTC-I was freeze-dried and crosslinked with genipin (OTC-I_GNP) and carbodiimide (OTC-I_EDC). The gross appearance, physico-chemical characteristics, biocompatibility and growth profile of seeded skin cells were assessed. The light brown and white appearance for the OTC-I_GNP scaffold and other groups were observed, respectively. The OTC-I_GNP scaffold demonstrated the highest swelling ratio (~1885%) and water uptake (94.96 ± 0.14%). The Fourier transformation infrared demonstrated amide A, B and I, II and III which represent collagen type I. The microstructure of all fabricated sponges presented a similar surface roughness with the presence of visible collagen fibers and a heterogenous porous structure. The OTC-I_EDC scaffold was more toxic and showed the lowest cell attachment and proliferation as compared to other groups. The micrographic evaluation revealed that CC potentially formed the epidermal- and dermal-like layers in both SM and ALI that prominently observed with OTC-I_GNP compared to others. In conclusion, these results suggest that OTC_GNP could be used as a 3D in vitro skin model under ALI microenvironment.


1993 ◽  
Vol 264 (4) ◽  
pp. G589-G595 ◽  
Author(s):  
D. A. Brenner ◽  
J. Westwick ◽  
M. Breindl

Cirrhosis is characterized by an increased deposition of extracellular matrix proteins, including type I collagen. Type I collagen is a product of two genes, alpha 1(I) and alpha 2(I), which are generally coordinately regulated. Since expression of type I collagen genes is increased during cirrhosis, understanding the structure and function of the regulatory components of the type I collagen genes should provide insight into the molecular pathogenesis of cirrhosis. This review will analyze the collagen alpha 1(I) gene with respect to chromatin structure, DNA methylation, regulation by agonists, and DNA-protein interactions.


2007 ◽  
Vol 330-332 ◽  
pp. 1181-1184
Author(s):  
Zhi He Zhao ◽  
Jun Wang ◽  
Yu Bo Fan ◽  
Song Jiao Luo ◽  
Ling Yong Jiang

It was well recognized that mechanical strain plays a crucial role in periodontal tissues remodeling. The aim of this study was to investigate the effect of mechanical strain on osteoblastic precursor cells in a collagen type I gel scaffold. Rat MSCs were isolated and cultured according to the established method. Cells were induced with osteogenic medium, then seeded in a collagen type I gel and mechanically stretched by application of cyclic biaxial strain 24h later. Strain cycle was set to 1 cycle/min (0.017Hz), and strain magnitude was set to 2%, 5%, 7% elongation. Cells were collected in 0h, 3h, 6h, 9h, 12h, 24h and 48h respectively. ODF and ICAM-1 mRNA were analyzed by RT-PCR assay. The results shown that 2-7% elongation strain, either dynamic or static, inhibited ICAM-1and ODF expression of osteoblastic precursors, and the effects were relative tightly to strain magnitude. The inhibition effects of dynamic strain loading group exceeded the corresponding static strain. This work suggested that appropriate mechanical strech may suppress differentiation of osteoclasts through inhibiting expression of ICAM-1 and ODF. Application of mechanical stress might have a beneficial effect on quantity of generated bone tissue and might be a important factor in tissue engineering of periodontal tissues.


Blood ◽  
2009 ◽  
Vol 114 (22) ◽  
pp. 503-503
Author(s):  
Teresa Mortera-Blanco ◽  
Athanasios Mantalaris ◽  
Alexander Bismarck ◽  
Nicki Panoskaltsis

Abstract Abstract 503 The ability to expand cord blood (CB) cells ex vivo overcomes an important limitation to its wider clinical application in cellular therapies. The current practice of hematopoietic cell culture is based on two-dimensional (2D) tissue culture flasks or well plates which require either co-culture with allogeneic or xenogeneic stromal cells and the exogenous provision of several cytokines. This 2D culture environment is artificial and lacks the 3D cellular niches that characterise the in vivo hematopoietic inductive microenvironment. Specifically, the cultured cells are exposed to abnormally high cytokine concentrations, which may result in differentiation and loss of pluripotency. We have previously developed a 3D bone marrow biomimicry through the use of synthetic scaffolds made of poly (D,L-lactide-co-glycolide) (PLGA) and polyurethane (PU) coated with collagen type I. Our previous work has shown that these scaffolds, which were seeded with cord blood (CB) mononuclear cells (MNCs) at a cell density of 3-6×106cells per scaffold (5×5×5mm3), could successfully support long-term culture in the absence of exogenous growth factors for over 4 weeks. Specifically, the 3D biomimicry facilitated a 53-fold total MNC expansion, with an increase in the BFU-E and CFU-GM progenitor cell population. However, these cultures, although cytokine-free, contained 20-30% (v/v) fetal calf serum which can have both conducive and inhibitory effects on hematopoietic cell cultures due to the unknown composition and concentration of humoral factors contained within. Inclusion of serum in expansion-type cultures can limit the clinical application of the derived product. The serum-free and cytokine-free culture and expansion of hematopoietic cells has not been achieved until now. Herein, we report that for at least 4 weeks the polyurethane (PU) scaffolds coated with collagen type I were able to maintain and expand human CB MNCs. Furthermore the progenitor population, as determined by the colony forming unit assay, was also maintained and preferentially directed towards the granulocytic lineage, even though the CFU-GEMMs declined. Immunophenotypic analysis of the extracted cells confirmed the presence of erythroid precursors (CD71+CD45-) as well as early maturing myeloid cells. In contrast, the 2D cytokine- and serum-free cultures collapsed within 3-4 days. We hypothesized that the 3D biomimicry was able to facilitate serum- and cytokine-free conditions because it can recapitulate the three-dimensional architecture of the human bone marrow. This hypothesis was supported by scanning electron microscopy of the central sections of the scaffolds that showed the migration of cells within the pores and establishment of “niche-like” structures. In conclusion, this novel 3D culture system is capable of long-term, cytokine- and serum-free expansion of haematopoietic cells from cord blood, enabling the study of haematopoiesis as well as facilitating the expansion of cells for future clinical applications. Disclosures: No relevant conflicts of interest to declare.


2006 ◽  
Vol 182 (3-4) ◽  
pp. 143-154 ◽  
Author(s):  
Leslie Heckmann ◽  
Jörg Fiedler ◽  
Thomas Mattes ◽  
Rolf E. Brenner

2019 ◽  
Vol 48 (8) ◽  
pp. 1671-1683
Author(s):  
Mohd Heikal Mohd Yunus ◽  
Ahmad Nazrun Shuid ◽  
Mohd Fauzi Busra ◽  
Kien Hui Chua ◽  
Norzana Abdul Ghafar ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document