Transient Enhanced Diffusion of Dopants in Preamorphised Si Layers

1996 ◽  
Vol 439 ◽  
Author(s):  
A. Claverie ◽  
C. Bonafos ◽  
M. Omri ◽  
B. De Mauduit ◽  
G. Ben Assayag ◽  
...  
Keyword(s):  
Ostwald Ripening ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Interstitial Atoms ◽  
Extrinsic Dislocation ◽  
The Mean ◽  
Boron Diffusivity ◽  
Shed Light

AbstractTransient Enhanced Diffusion (TED) of dopants in Si is the consequence of the evolution, upon annealing, of a large supersaturation of Si self-interstitial atoms left after ion bombardment. In the case of amorphizing implants, this supersaturation is located just beneath the c/a interface and evolves through the nucleation and growth of End-Of-Range (EOR) defects.For this reason, we discuss here the relation between TED and EOR defects. Modelling of the behavior of these defects upon annealing allows one to understand why and how they affect dopant diffusion. This is possible through the development of the Ostwald ripening theory applied to extrinsic dislocation loops. This theory is shown to be readily able to quantitatively describe the evolution of the defect population (density, size) upon annealing and gives access to the variations of the mean supersaturation of Si self-interstitial atoms between the loops and responsible for TED. This initial supersaturation is, before annealing, at least 5 decades larger than the equilibrium value and exponentially decays with time upon annealing with activation energies that are the same than the ones observed for TED. It is shown that this time decay is precisely at the origin of the transient enhancement of boron diffusivity through the interstitial component of boron diffusion. Side experiments shed light on the effect of the proximity of a free surface on the thermal behavior of EOR defects and allow us to quantitatively describe the space and time evolutions of boron diffusivity upon annealing of preamorphised Si layers.

Transient Enhanced Diffusion of Dopants in Preamorphised Si Layers

1996 ◽  
Vol 438 ◽  
Author(s):  
A. Claverie ◽  
C. Bonafos ◽  
M. Omri ◽  
B. De Mauduit ◽  
G. Ben Assayag ◽  
...  
Keyword(s):  
Ostwald Ripening ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Interstitial Atoms ◽  
Extrinsic Dislocation ◽  
The Mean ◽  
Boron Diffusivity ◽  
Shed Light

AbstractTransient Enhanced Diffusion (TED) of dopants in Si is the consequence of the evolution, upon annealing, of a large supersaturation of Si self-interstitial atoms left after ion bombardment. In the case of amorphizing implants, this supersaturation is located just beneath the c/a interface and evolves through the nucleation and growth of End-Of-Range (EOR) defects.For this reason, we discuss here the relation between TED and EOR defects. Modelling of the behavior of these defects upon annealing allows one to understand why and how they affect dopant diffusion. This is possible through the development of the Ostwald ripening theory applied to extrinsic dislocation loops. This theory is shown to be readily able to quantitatively describe the evolution of the defect population (density, size) upon annealing and gives access to the variations of the mean supersaturation of Si self-interstitial atoms between the loops and responsible for TED. This initial supersaturation is, before annealing, at least 5 decades larger than the equilibrium value and exponentially decays with time upon annealing with activation energies that are the same than the ones observed for TED. It is shown that this time decay is precisely at the origin of the transient enhancement of boron diffusivity through the interstitial component of boron diffusion. Side experiments shed light on the effect of the proximity of a free surface on the thermal behavior of EOR defects and allow us to quantitatively describe the space and time evolutions of boron diffusivity upon annealing of preamorphised Si layers.

The Effect of Fluorine Implantation on Boron Diffusion in Metastable Si0.86 Ge0.14

2004 ◽  
Vol 810 ◽  
Author(s):  
Huda A. W. A. El Mubarek ◽  
Yun Wang ◽  
Janet M. Bonar ◽  
Peter Hemment ◽  
Peter Ashburn
Keyword(s):  
Thermal Diffusion ◽  
Sige Layer ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Rich Region ◽  
Implantation Energy ◽  
Enhanced Diffusion ◽  
Partial Relaxation ◽  
Transient Enhanced Diffusion ◽  
Marker Layer

ABSTRACTThis paper investigates the effect of varying F+ implantation energy on boron thermal diffusion and boron transient enhanced diffusion (TED) in metastable Si0.86Ge0.14 by characterising the diffusion of a boron marker layer in samples with and without P+ and F+ implants. The effect of two F+ implantation energies (185keV and 42keV) was studied at two anneal temperatures 950°C and 1025°C. In samples implanted with P+ & 185keV F+, the fluorine suppresses boron transient enhanced diffusion completely at 950°C and suppresses thermal diffusion by 25% at 1025°C. In samples implanted with P+ & 42keV F+, the fluorine does not reduce boron transient enhanced diffusion at 950°C. This result is explained by the location of the boron marker layer in the vacancy-rich region of the fluorine damage profile for the 185keV implant but in the interstitial-rich region for the 42keV implant. Isolated dislocation loops are seen in the SiGe layer for the 185keV implant. We postulate that these loops are due to the partial relaxation of the metastable Si0.86Ge0.14 layer.

Quantitative Measurement of Reduction of Boron Diffusion by Substitutional Carbon Incorporation

1998 ◽  
Vol 527 ◽  
Author(s):  
M. S. Carroll ◽  
L. D. Lanzerotti ◽  
J. C. Sturm
Keyword(s):  
Quantitative Measurement ◽  
Device Modeling ◽  
Electrical Characteristics ◽  
Boron Diffusion ◽  
Carbon Incorporation ◽  
Combined Process ◽  
Enhanced Diffusion ◽  
Interstitial Concentration ◽  
Transient Enhanced Diffusion ◽  
Boron Diffusivity

ABSTRACTRecently, the suppression of boron diffusion due to both thermal and transient enhanced diffusion (TED) has been demonstrated through the incorporation of 0.5% substitutional carbon in the base of Si/SiGe/Si heterojunction transistor's (HBT)[1,2]. Because the devices are sensitive to diffusion on a scale less than that we can detect with SIMS, in this paper combined process and device modeling (TMA TSUPREM4 and MEDICI) are used to relate observed electrical characteristics (collector saturation currents and Early voltages) of the HBT's to boron diffusion, with a sensitivity of 20-30Å. Boron diffusivity in the SiGeC base is ~8 times slower than that of the boron diffusivity in the SiGe base without implant damage (no TED). In the case of ion implant damage in an overlying layer to cause TED the excess interstitial concentration due to ion implant damage is reduced by approximately 99% through incorporation of 0.5% substitutional carbon in the HBT SiGe bases. This demonstrates that carbon incorporation acts as an effective sink for interstitials.

Investigation of Fluorine Effect on the Boron Diffusion by Mean of Boron Redistribution in Shallow Delta-doped Layers

2004 ◽  
Vol 810 ◽  
Author(s):  
A. Halimaoui ◽  
J. M. Hartmann ◽  
C. Laviron ◽  
R. El-Farhane ◽  
F. Laugier
Keyword(s):  
Point Defects ◽  
Depth Profiling ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Boron Doped ◽  
Transient Enhanced Diffusion ◽  
Sims Depth Profiling

ABSTRACTPreviously published articles have shown that co-implanted fluorine reduces transient enhanced diffusion of boron. However, it is not yet elucidated whether this effect is due to interaction of fluorine with point-defects or boron atoms. In this work, we have used boron redistribution in a shallow Delta-doped Si structures in order to get some insights into the role of fluorine in the boron diffusion. The structures consisted of 3 boron-doped layers separated by 40nm-thick undoped silicon. The samples were given to Ge preamorphization and F co-implant. SIMS depth profiling was used to analyse boron redistribution after annealing. The results we obtained strongly suggest that fluorine is not interacting with point-defects. The reduction in boron TED is most probably due to boron-fluorine interaction.

Simulation of Transient Enhanced Diffusion in Silicon Taking into Account Ostwald Ripening of Defects

2002 ◽  
Vol 717 ◽  
Author(s):  
Masashi Uematsu
Keyword(s):  
Time Dependence ◽  
Diffusion Model ◽  
Low Dose ◽  
Ostwald Ripening ◽  
High Dose ◽  
Enhanced Diffusion ◽  
Annealing Conditions ◽  
Transient Enhanced Diffusion ◽  
High Dose Implantation ◽  
Medium Dose

AbstractThe transient enhanced diffusion (TED) of high-dose implanted P is simulated taking into account Ostwald ripening of end-of-range (EOR) defects. First, we integrated a basic diffusion model based on the simulation of in-diffusion, where no implanted damages are involved. Second, from low-dose implantation, we developed a model for TED due to {311} self-interstitial (I) clusters involving Ostwald ripening and the dissolution of {311} clusters. Third, from medium-dose implantation, we showed that P-I clusters should be taken into account, and during the diffusion, the clusters are dissolved to emit self-interstitials that also contribute to TED. Finally, from high-dose implantation, EOR defects are modeled and we derived a formula to describe the time-dependence for Ostwald ripening of EOR defects, which is more significant at higher temperatures and longer annealing times. The simulation satisfactorily predicts the TED for annealing conditions, where the calculations overestimate the diffusion without taking Ostwald ripening into account.

Effect of Nitrogen Implants on Boron Transient Enhanced Diffusion

2000 ◽  
Vol 610 ◽  
Author(s):  
Omer Dokumaci ◽  
Paul Ronsheim ◽  
Suri Hegde ◽  
Dureseti Chidambarrao ◽  
Lahir Shaik-Adam ◽  
...  
Keyword(s):  
Low Temperature ◽  
Boron Diffusion ◽  
High Nitrogen ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
High Boron ◽  
Buried Layer ◽  
Higher Doses ◽  
Low Nitrogen ◽  
Temperature Furnace

AbstractThe effect of nitrogen implants on boron transient enhanced diffusion was studied for nitrogen-only, boron-only, and boron plus nitrogen implants. A boron buried layer was used as a detector for interstitial supersaturation in the samples. Boron dose ranged from 1×1014 to 1×1015 cm−2 and N2+ dose from 5×1013 and 5×1014 cm−2. The energies were chosen such that the location of the nitrogen and boron peaks matched. After the implants, RTA and low temperature furnace anneals were carried out. The diffusivity enhancements were extracted from the buried layer profiles by simulation. Nitrogen-only implants were found to cause significant enhanced diffusion on the buried boron layer. For lower doses, the enhancement of the nitrogen implant is about half as that of boron whereas the enhancements are equal at higher doses. Nitrogen coimplant with boron increases the transient enhanced diffusion of boron at low boron doses, which implies that nitrogen does not act as a strong sink for excess interstitials unlike carbon. At high boron doses, nitrogen co-implant does not significantly change boron diffusion. Sheet resistance measurements indicate that low nitrogen doses do not affect the activation of boron whereas high nitrogen doses either reduce the activation of boron or the mobility of the holes.

A New Practical Approach to Implement a Transient Enhanced Diffusion Model into an Fem-Based 2-D Process Simulator

1997 ◽  
Vol 490 ◽  
Author(s):  
Noriyuki Sugiyasu ◽  
Kaina Suzuki ◽  
Syuichi Kojima ◽  
Yasushi Ohyama
Keyword(s):  
Diffusion Model ◽  
Boron Diffusion ◽  
Combined Method ◽  
Solution System ◽  
Charge Neutrality ◽  
Robust Solution ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Vacancy Pair ◽  
Process Simulator

ABSTRACTWe have proposed a coupled and de-coupled combined method to solve partial differential equations for a transient enhanced diffusion model. In the case of a boron diffusion process, the sum of concentrations of interstitial Si and of impurity-interstitial pair, the sum of concentrations of vacancy and of impurity-vacancy pair and each chemical impurity concentration are kept constant. The charge neutrality law is also applied. This procedure has realized a robust solution system which is implemented into our in-house FEM-based 2-D process simulator, and transient enhanced diffusion simulations for a sub-quarter micron nMOSFET have been demonstrated.

The Influence of Amorphizing Implants on Boron Diffusion in Silicon

1997 ◽  
Vol 469 ◽  
Author(s):  
H. S. Chao ◽  
P. B. Griffin ◽  
J. D. Plummer
Keyword(s):  
Point Defects ◽  
Field Enhancement ◽  
Enhancement Effect ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Electric Field Enhancement ◽  
Diffusion Behavior ◽  
Enhanced Diffusion ◽  
Pile Up ◽  
Experimental Structure

ABSTRACTThe transient enhanced diffusion behavior of B after ion implantation above the amorphization threshold is investigated. The experimental structure uses a layer of epitaxially grown Si, uniformly doped with B to act as a diffusion monitor. Wafers using this structure are implanted with amorphizing doses of Si, As, or P and annealed for various times at various temperatures. The experimental results show that upon annealing after Si implantation, there is a large amount of B pile-up that occurs at the amorphous/crystalline (A/C) interface while B is depleted from the region just beyond the A/C interface. This pile-up/depletion phenomenon can be attributed to the dislocation loops that form at the A/C interface. These loops act as sinks for interstitial point defects. There is also B pile-up/depletion behavior for As and P implants as well. However, this behavior may be explained by an electric field enhancement effect. While dislocation loops are known to form at the A/C interface for all of the investigated implant conditions, it appears that while they are necessary to simulate for Si amorphizing implants, they may not be necessary to simulate for As and P amorphizing implants.

Junction Depth Reduction of ion Implanted Boron in Silicon Through Fluorine ion Implantation

2000 ◽  
Vol 610 ◽  
Author(s):  
L. S. Robertson ◽  
P. N. Warnes ◽  
K. S. Jones ◽  
S. K. Earles ◽  
M. E. Law ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Secondary Ion Mass Spectrometry ◽  
Chemical Species ◽  
Amorphous Layer ◽  
Experimental Conditions ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Transmission Electron ◽  
Species Effect ◽  
Boron Diffusivity

AbstractThe interaction between boron and excess silicon interstitials caused by ion implantation hinders the formation of ultra-shallow, low resistivity junctions. Previous studies have shown that fluorine reduces boron transient enhanced diffusion, however it is unclear whether this observed phenomenon is due to the fluorine interacting with the boron atoms or silicon self-interstitials. Amorphization of a n-type Czochralski wafer was achieved with a 70 keV Si+ implantation at a dose of 1×1015/cm2. The Si+ implant produced a 1500Å deep amorphous layer, which was then implanted with 1.12 keV 1×1015/cm2 B+. The samples were then implanted with a dose of 2×1015/cm2F+ at various energies ranging from 2 keV to 36 keV. Ellipsometry measurements showed no increase in the amorphous layer thickness from either the boron or fluorine implants. The experimental conditions allowed the chemical species effect to be studied independent of the implant damage caused by the fluorine implant. Post-implantation anneals were performed in a tube furnace at 750° C. Secondary ion mass spectrometry was used to monitor the dopant diffusion after annealing. Transmission electron microscopy (TEM) was used to study the end-of-range defect evolution. The addition of fluorine reduces the boron transient enhanced diffusion for all fluorine energies. It was observed that both the magnitude of the boron diffusivity and the concentration gradient of the boron profile vary as a function of fluorine energy.

Sign in / Sign up

Export Citation Format

Share Document