The Influence of Amorphizing Implants on Boron Diffusion in Silicon

1997 ◽  
Vol 469 ◽  
Author(s):  
H. S. Chao ◽  
P. B. Griffin ◽  
J. D. Plummer
Keyword(s):  
Point Defects ◽  
Field Enhancement ◽  
Enhancement Effect ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Electric Field Enhancement ◽  
Diffusion Behavior ◽  
Enhanced Diffusion ◽  
Pile Up ◽  
Experimental Structure

ABSTRACTThe transient enhanced diffusion behavior of B after ion implantation above the amorphization threshold is investigated. The experimental structure uses a layer of epitaxially grown Si, uniformly doped with B to act as a diffusion monitor. Wafers using this structure are implanted with amorphizing doses of Si, As, or P and annealed for various times at various temperatures. The experimental results show that upon annealing after Si implantation, there is a large amount of B pile-up that occurs at the amorphous/crystalline (A/C) interface while B is depleted from the region just beyond the A/C interface. This pile-up/depletion phenomenon can be attributed to the dislocation loops that form at the A/C interface. These loops act as sinks for interstitial point defects. There is also B pile-up/depletion behavior for As and P implants as well. However, this behavior may be explained by an electric field enhancement effect. While dislocation loops are known to form at the A/C interface for all of the investigated implant conditions, it appears that while they are necessary to simulate for Si amorphizing implants, they may not be necessary to simulate for As and P amorphizing implants.

Investigation of Fluorine Effect on the Boron Diffusion by Mean of Boron Redistribution in Shallow Delta-doped Layers

2004 ◽  
Vol 810 ◽  
Author(s):  
A. Halimaoui ◽  
J. M. Hartmann ◽  
C. Laviron ◽  
R. El-Farhane ◽  
F. Laugier
Keyword(s):  
Point Defects ◽  
Depth Profiling ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Boron Doped ◽  
Transient Enhanced Diffusion ◽  
Sims Depth Profiling

ABSTRACTPreviously published articles have shown that co-implanted fluorine reduces transient enhanced diffusion of boron. However, it is not yet elucidated whether this effect is due to interaction of fluorine with point-defects or boron atoms. In this work, we have used boron redistribution in a shallow Delta-doped Si structures in order to get some insights into the role of fluorine in the boron diffusion. The structures consisted of 3 boron-doped layers separated by 40nm-thick undoped silicon. The samples were given to Ge preamorphization and F co-implant. SIMS depth profiling was used to analyse boron redistribution after annealing. The results we obtained strongly suggest that fluorine is not interacting with point-defects. The reduction in boron TED is most probably due to boron-fluorine interaction.

The Effect of Fluorine Implantation on Boron Diffusion in Metastable Si0.86 Ge0.14

2004 ◽  
Vol 810 ◽  
Author(s):  
Huda A. W. A. El Mubarek ◽  
Yun Wang ◽  
Janet M. Bonar ◽  
Peter Hemment ◽  
Peter Ashburn
Keyword(s):  
Thermal Diffusion ◽  
Sige Layer ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Rich Region ◽  
Implantation Energy ◽  
Enhanced Diffusion ◽  
Partial Relaxation ◽  
Transient Enhanced Diffusion ◽  
Marker Layer

ABSTRACTThis paper investigates the effect of varying F+ implantation energy on boron thermal diffusion and boron transient enhanced diffusion (TED) in metastable Si0.86Ge0.14 by characterising the diffusion of a boron marker layer in samples with and without P+ and F+ implants. The effect of two F+ implantation energies (185keV and 42keV) was studied at two anneal temperatures 950°C and 1025°C. In samples implanted with P+ & 185keV F+, the fluorine suppresses boron transient enhanced diffusion completely at 950°C and suppresses thermal diffusion by 25% at 1025°C. In samples implanted with P+ & 42keV F+, the fluorine does not reduce boron transient enhanced diffusion at 950°C. This result is explained by the location of the boron marker layer in the vacancy-rich region of the fluorine damage profile for the 185keV implant but in the interstitial-rich region for the 42keV implant. Isolated dislocation loops are seen in the SiGe layer for the 185keV implant. We postulate that these loops are due to the partial relaxation of the metastable Si0.86Ge0.14 layer.

Onset of Extended Defect Formation and Enhanced Diffusion for Ultra-Low Energy Boron Implants

1999 ◽  
Vol 568 ◽  
Author(s):  
Jinning Liu ◽  
Kevin S. Jones ◽  
Daniel F. Downey ◽  
Sandeep Mehta
Keyword(s):  
Defect Formation ◽  
Low Energy ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Extended Defect ◽  
Enhanced Diffusion ◽  
Annealing Conditions ◽  
Diffusion Enhancement ◽  
Spike Anneal ◽  
Low Thermal Budget

ABSTRACTTo meet the challenge of achieving ultra shallow p+/n source/drain extension junctions for 0.1 Oim node devices, ultra low energy boron implant and advanced annealing techniques have been explored. In this paper, we report the extended defect and boron diffusion behavior with various implant and annealing conditions. Boron implants were performed at energies from 0.25keV to lkeV and doses of 5 × 1014 cm−2 and 1 × 1015cm−2. Subsequent anneals were carried out in nitrogen ambient. The effect of energy, dose and oxide capping on extended defect formation and enhanced dopant diffusion was examined. It was observed that a thin screen oxide layer (35Å), grown prior to implantation, reduces the concentration of dopant in the Si by a significant amount as expected. This oxide also reduces the dislocation loops in the lattice and lowers diffusion enhancement of the dopant during annealing. The final junction depth can be optimized by using a low thermal budget spike anneal in a controlled oxygen ambient.

Rapid Thermal Annealing of Ion-Implanted Silicon and Gallium Arsenide

1983 ◽  
Vol 23 ◽  
Author(s):  
J. Narayan
Keyword(s):  
Gallium Arsenide ◽  
Free Surface ◽  
Electrical Properties ◽  
Point Defects ◽  
Solid Phase ◽  
Bulk Diffusion ◽  
Dislocation Loops ◽  
Enhanced Diffusion ◽  
Implantation Damage ◽  
Complete Annealing

ABSTRACTWe have investigated the annealing of ion implantation damage (in the form of amorphous layers and/or the layers containing only dislocation loops) in silicon and gallium arsenide. The annealing of amorphous layers occurs by solid-phase-epitaxial growth and that of dislocation loops involves primarily loop-coalescence as a result of conservative climb and glide processes. The annealing of disolated loops occurs primarily by a bulk diffusion process. Almost a “complete” annealing of displacement damage is possible for shallow implants provided loop–coalescence does not lead to the formation of cross–grid of dislocations. For deep implants, the free surface cannot provide an effective sink for defects as in the case of shallow implants. Dopant profiles can be controlled to less than 1000 Å in layers having good electrical properties. The enhanced diffusion of dopants is observed probably due to entrapment of point defects in the annealed regions.

The Role of Surface Annihilation in Annealing Investigated by Atomic Model Simulation

2005 ◽  
Vol 864 ◽  
Author(s):  
Min Yu ◽  
Xiao Zhang ◽  
Ru Huang ◽  
Xing Zhang ◽  
Yangyuan Wang ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Integrated Circuits ◽  
Point Defects ◽  
Model Simulation ◽  
Kinetic Monte Carlo ◽  
Boron Diffusion ◽  
Junction Depth ◽  
Kinetic Monte Carlo Method ◽  
Enhanced Diffusion

AbstractBehavior of point defects in annealing is investigated a lot in order to suppress the Transient Enhanced Diffusion (TED) of boron as is urged by the development of integrated circuits. Surface annihilation possibility for point defects is very important in determining junction depth in the case of ultra-shallow doping. However the understanding on it is still ambiguous considering the inconsistent results on surface annihilation behavior. In this paper the variation of surface annihilation possibility is studied. The simulation on boron diffusion as well as silicon diffusion is performed. The evolution of Si clusters is simulated. By explaining experimental results with Kinetic Monte Carlo method based simulation, we proposed that surface annihilation possibility varies in different cases.

Study of Electronic Transport Characteristic and Electric Field Enhancement Effect of Wafer-bonded Si/Si p-n Junction

2020 ◽  
Vol 49 (10) ◽  
pp. 1025002-1025002
Author(s):  
彭强 Qiang PENG ◽  
何盛泉 Sheng-quan HE ◽  
任良斌 Liang-bin REN ◽  
李杏莲 Xing-lian LI ◽  
柯少颖 Shao-ying KE
Keyword(s):  
Electric Field ◽  
Electronic Transport ◽  
Field Enhancement ◽  
Enhancement Effect ◽  
Electric Field Enhancement ◽  
Transport Characteristic

Transient Enhanced Diffusion of Dopants in Preamorphised Si Layers

1996 ◽  
Vol 438 ◽  
Author(s):  
A. Claverie ◽  
C. Bonafos ◽  
M. Omri ◽  
B. De Mauduit ◽  
G. Ben Assayag ◽  
...  
Keyword(s):  
Ostwald Ripening ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Transient Enhanced Diffusion ◽  
Interstitial Atoms ◽  
Extrinsic Dislocation ◽  
The Mean ◽  
Boron Diffusivity ◽  
Shed Light

AbstractTransient Enhanced Diffusion (TED) of dopants in Si is the consequence of the evolution, upon annealing, of a large supersaturation of Si self-interstitial atoms left after ion bombardment. In the case of amorphizing implants, this supersaturation is located just beneath the c/a interface and evolves through the nucleation and growth of End-Of-Range (EOR) defects.For this reason, we discuss here the relation between TED and EOR defects. Modelling of the behavior of these defects upon annealing allows one to understand why and how they affect dopant diffusion. This is possible through the development of the Ostwald ripening theory applied to extrinsic dislocation loops. This theory is shown to be readily able to quantitatively describe the evolution of the defect population (density, size) upon annealing and gives access to the variations of the mean supersaturation of Si self-interstitial atoms between the loops and responsible for TED. This initial supersaturation is, before annealing, at least 5 decades larger than the equilibrium value and exponentially decays with time upon annealing with activation energies that are the same than the ones observed for TED. It is shown that this time decay is precisely at the origin of the transient enhancement of boron diffusivity through the interstitial component of boron diffusion. Side experiments shed light on the effect of the proximity of a free surface on the thermal behavior of EOR defects and allow us to quantitatively describe the space and time evolutions of boron diffusivity upon annealing of preamorphised Si layers.

Device Parametric Shift Mechanism Caused by Boron Halo Redistribution Resulting from Dose Rate Dependence of SDE Implant

2005 ◽  
Vol 864 ◽  
Author(s):  
Ukyo Jeong ◽  
Jinning Liu ◽  
Baonian Guo ◽  
Kyuha Shim ◽  
Sandeep Mehta
Keyword(s):  
Surface Region ◽  
Amorphous Region ◽  
Amorphous Layer ◽  
High Dose ◽  
Extended Defects ◽  
Dislocation Loops ◽  
Near Surface ◽  
Enhanced Diffusion ◽  
Dose Rates ◽  
Pile Up

AbstractChange in dopant diffusion was observed for Arsenic source drain extension (SDE) implants when they were performed at various dose rates. The high dose SDE implant amorphizes the surface of the silicon substrate and the thickness of the amorphous layer is strongly influenced by the rate of dopant bombardment. It is well known that the ion implantation process introduces excess interstitials. While the amorphous region is completely re-grown into single crystal during subsequent anneal without leaving behind extended defects, interstitials that are injected beyond the amorphous layer lead to formation of {311} defects or dislocation loops in the end of range region. During thermal processing, these extended defects dissolve, release interstitials, which in turn lead to transient enhanced diffusion of underlying Boron halo dopant. Dopant depth profiles measured by SIMS revealed different amount of Boron pile-up in the near surface region, corresponding to different SDE implant dose rates. In CMOS devices, this surface pile-up would correlate with a Boron pile-up in the channel region that would lead to a shift in transistor characteristics. Through this investigation, we were able to explain the mechanism causing device characteristics shift resulted from SDE implant with the same dose and energy but different dose rates.

Point Defect Detector Studies of Oxidized Silicon

1991 ◽  
Vol 238 ◽  
Author(s):  
H. L. Meng ◽  
K. S. Jones ◽  
S. Prussin
Keyword(s):  
Ion Implantation ◽  
Point Defect ◽  
Point Defects ◽  
Device Fabrication ◽  
Type Ii ◽  
Dislocation Loops ◽  
Plan View ◽  
Atom Concentration ◽  
Enhanced Diffusion ◽  
Transmission Electron

ABSTRACTIon implantation and thermal oxidation are device fabrication processes that lead to perturbation of equilibrium point defects concentration in silicon. This study investigates the interaction between oxidation-induced point defects and type II dislocation loops intentionally introduced in silicon via ion implantation. The type II dislocation loops were introduced via Si implants into (100) Si wafers at 50 keV to a dose ranging from 2×1015 to 1×1016/cm2. The subsequent furnace annealing at 900 °C was done for times between 30 min and 4 hr in either a dry oxygen or nitrogen ambient. Plan-view transmission electron microscopy (PTEM) was used to characterize the increase in atom concentration bound by dislocation loops as a result of oxidation. The results show type II dislocation loops can be used as point defect detector and they are efficient in measuring oxidation-induced point defects. It is also shown that the measured net interstitials flux trapped by dislocation loops is linearly proportional to the total supersaturation of interstitials as measured by oxidation enhanced diffusion (OED) studies.

Semi-Empirical Model for Boron Diffusion During Rapid Thermal Annealing of BF2 Implanted Silicon

1993 ◽  
Vol 303 ◽  
Author(s):  
Tzu-Hsin Huang ◽  
H. Kinoshita ◽  
D. L. Kwong
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Enhanced Diffusion ◽  
Defect Clusters ◽  
Annealing Conditions ◽  
Wide Range ◽  
Point Defect Clusters ◽  
Semi Empirical

ABSTRACTThe mechanism of the enhanced diffusion of boron during rapid thermal annealing (RTA) of BF2-implanted Si has been investigated, and a diffusion model is accordingly developed for a wide range of implant and annealing conditions. Simulation results are in excellent agreement with experiments for BF2 implant doses from 2×1013 to 5×1015cm−2, implant energies from 6 to 45 keV, and annealing temperatures from 950 to 1100°C. This model not only accounts for the transient enhanced diffusion due to the annealing of point-defect clusters and dislocation loops, but also for the retarded diffusion due to dopant precipitation. All the parameters used in this model are analytically determined.

Sign in / Sign up

Export Citation Format

Share Document