Modeling of a-Si:H Alloy Solar Cells on Textured Substrates

1997 ◽  
Vol 467 ◽  
Author(s):  
M. Zeman ◽  
J. H. van den Berg ◽  
L. L. A. Vosteen ◽  
J. A. Willemen ◽  
J. W. Metselaar ◽  
...  
Keyword(s):  
Solar Cells ◽  
Light Scattering ◽  
Carrier Transport ◽  
Optical Model ◽  
Scattered Light ◽  
Sensitivity Study ◽  
Scattering Coefficients ◽  
Bottom Cell ◽  
Current Matching ◽  
Lower Ratio

ABSTRACTComputer modeling is used as a tool for determining current matching in hydrogenated amorphous silicon (a-Si:H) alloy tandem cells on textured substrates. The increasing complexity of a-Si:H based solar cells requires continuous extending and testing of the computer models which are used for their simulation. To take light scattering at the textured interfaces of the cell into account we developed a multi-rough-interface optical model GENPR02 which was used for calculating the absorption profiles in the solar cells. The results of a sensitivity study of the parameters of this optical model such as the scattering coefficients of the reflected and transmitted light and the dependence of scattered light on the in-going and out-going angle are presented. In order to simulate multi-junction solar cell as a complete device we implemented a novel model for tunnel/recombination junction (TRJ), which combines the trap assisted tunneling and enhanced carrier transport in the high field region of the TRJ.The current matching conditions were determined both for a-Si:H and a-SiGe:H bottom cells, while the top cell was an a-Si:H cell. We investigated the influence of light scattering at the textured interfaces and of the thickness of the intrinsic layer of the bottom cell on the optimal ratio (i2/i1) between the thicknesses of the bottom (i2) and top (il) intrinsic layers in the current-matched cell. The results show that increasing amount of scattering at the textured interfaces leads to higher efficiencies and lower ratio (i2/i1) in the current-matched cell. The use of a-SiGe:H material in the bottom cell leads to higher efficiency and 3 to 4 times lower i2/i1 ratio than in case of a-Si:H/a-Si:H cells.

Experimental investigation and modelling of light scattering in a-Si:H solar cells deposited on glass/ZnO:Al substrates

2002 ◽  
Vol 715 ◽  
Author(s):  
J. Krc ◽  
M. Zeman ◽  
O. Kluth ◽  
F. Smole ◽  
M. Topic
Keyword(s):  
Surface Roughness ◽  
Experimental Investigation ◽  
Solar Cells ◽  
Angular Distribution ◽  
Light Scattering ◽  
Optical Model ◽  
Distribution Functions ◽  
Interface Roughness ◽  
Scattering Parameters ◽  
Good Agreement

AbstractThe descriptive scattering parameters, haze and angular distribution functions of textured ZnO:Al transparent conductive oxides with different surface roughness are measured. An approach to determine the scattering parameters of all internal interfaces in p-i-n a-Si:H solar cells deposited on the glass/ZnO:Al substrates is presented. Using the determined scattering parameters as the input parameters of the optical model, a good agreement between the measured and simulated quantum efficiencies of the p-i-n a-Si:H solar cells with different interface roughness is achieved.

A Time-Resolved Low-Angle Light Scattering Apparatus. Application to Phase Separation Problems in Polymer Systems

2001 ◽  
Vol 66 (6) ◽  
pp. 973-982 ◽  
Author(s):  
Čestmír Koňák ◽  
Jaroslav Holoubek ◽  
Petr Štěpánek
Keyword(s):  
Phase Separation ◽  
Light Scattering ◽  
Signal To Noise Ratio ◽  
Scattered Light ◽  
Ccd Camera ◽  
Time Resolved ◽  
Polymer Systems ◽  
Software Analysis ◽  
Phase Separation Kinetics ◽  
Small Angle Light Scattering

A time-resolved small-angle light scattering apparatus equipped with azimuthal integration by means of a conical lens or software analysis of scattering patterns detected with a CCD camera was developed. Averaging allows a significant reduction of the signal-to-noise ratio of scattered light and makes this technique suitable for investigation of phase separation kinetics. Examples of applications to time evolution of phase separation in concentrated statistical copolymer solutions and dissolution of phase-separated domains in polymer blends are given.

scholarly journals Light-Scattering Simulations from Spherical Bimetallic Core–Shell Nanoparticles

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 359
Author(s):  
Francesco Ruffino
Keyword(s):  
Optical Properties ◽  
Light Scattering ◽  
Bimetallic Nanoparticles ◽  
Dominant Role ◽  
Scattered Light ◽  
Specific Interaction ◽  
Surface Enhanced Raman Spectroscopy ◽  
Localized Surface Plasmon ◽  
Core Shell ◽  
The Core

Bimetallic nanoparticles show novel electronic, optical, catalytic or photocatalytic properties different from those of monometallic nanoparticles and arising from the combination of the properties related to the presence of two individual metals but also from the synergy between the two metals. In this regard, bimetallic nanoparticles find applications in several technological areas ranging from energy production and storage to sensing. Often, these applications are based on optical properties of the bimetallic nanoparticles, for example, in plasmonic solar cells or in surface-enhanced Raman spectroscopy-based sensors. Hence, in these applications, the specific interaction between the bimetallic nanoparticles and the electromagnetic radiation plays the dominant role: properties as localized surface plasmon resonances and light-scattering efficiency are determined by the structure and shape of the bimetallic nanoparticles. In particular, for example, concerning core-shell bimetallic nanoparticles, the optical properties are strongly affected by the core/shell sizes ratio. On the basis of these considerations, in the present work, the Mie theory is used to analyze the light-scattering properties of bimetallic core–shell spherical nanoparticles (Au/Ag, AuPd, AuPt, CuAg, PdPt). By changing the core and shell sizes, calculations of the intensity of scattered light from these nanoparticles are reported in polar diagrams, and a comparison between the resulting scattering efficiencies is carried out so as to set a general framework useful to design light-scattering-based devices for desired applications.

scholarly journals Novel semi-analytical optoelectronic modeling based on homogenization theory for realistic plasmonic polymer solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zahra Arefinia ◽  
Dip Prakash Samajdar
Keyword(s):  
Solar Cells ◽  
Active Layer ◽  
Analytical Modeling ◽  
High Efficiency ◽  
Polymer Solar Cells ◽  
Scattered Light ◽  
Homogenization Theory ◽  
Computational Time ◽  
Coupled Equations ◽  
Long Time

AbstractNumerical-based simulations of plasmonic polymer solar cells (PSCs) incorporating a disordered array of non-uniform sized plasmonic nanoparticles (NPs) impose a prohibitively long-time and complex computational demand. To surmount this limitation, we present a novel semi-analytical modeling, which dramatically reduces computational time and resource consumption and yet is acceptably accurate. For this purpose, the optical modeling of active layer-incorporated plasmonic metal NPs, which is described by a homogenization theory based on a modified Maxwell–Garnett-Mie theory, is inputted in the electrical modeling based on the coupled equations of Poisson, continuity, and drift–diffusion. Besides, our modeling considers the effects of absorption in the non-active layers, interference induced by electrodes, and scattered light escaping from the PSC. The modeling results satisfactorily reproduce a series of experimental data for photovoltaic parameters of plasmonic PSCs, demonstrating the validity of our modeling approach. According to this, we implement the semi-analytical modeling to propose a new high-efficiency plasmonic PSC based on the PM6:Y6 PSC, having the highest reported power conversion efficiency (PCE) to date. The results show that the incorporation of plasmonic NPs into PM6:Y6 active layer leads to the PCE over 18%.

scholarly journals Relaxed Current Matching Requirements in Highly Luminescent Perovskite Tandem Solar Cells and Their Fundamental Efficiency Limits

2021 ◽  
Vol 6 (2) ◽  
pp. 612-620
Author(s):  
Alan R. Bowman ◽  
Felix Lang ◽  
Yu-Hsien Chiang ◽  
Alberto Jiménez-Solano ◽  
Kyle Frohna ◽  
...  
Keyword(s):  
Solar Cells ◽  
Tandem Solar Cells ◽  
Current Matching

scholarly journals Comparing optical performance of a wide range of perovskite/silicon tandem architectures under real-world conditions

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Manvika Singh ◽  
Rudi Santbergen ◽  
Indra Syifai ◽  
Arthur Weeber ◽  
Miro Zeman ◽  
...  
Keyword(s):  
Solar Cells ◽  
Real World ◽  
Solar Spectrum ◽  
Photocurrent Density ◽  
Angle Of Incidence ◽  
Optical Study ◽  
Optical Performance ◽  
Tandem Solar Cells ◽  
Bottom Cell ◽  
Wide Range

Abstract Since single junction c-Si solar cells are reaching their practical efficiency limit. Perovskite/c-Si tandem solar cells hold the promise of achieving greater than 30% efficiencies. In this regard, optical simulations can deliver guidelines for reducing the parasitic absorption losses and increasing the photocurrent density of the tandem solar cells. In this work, an optical study of 2, 3 and 4 terminal perovskite/c-Si tandem solar cells with c-Si solar bottom cells passivated by high thermal-budget poly-Si, poly-SiOx and poly-SiCx is performed to evaluate their optical performance with respect to the conventional tandem solar cells employing silicon heterojunction bottom cells. The parasitic absorption in these carrier selective passivating contacts has been quantified. It is shown that they enable greater than 20 mA/cm2 matched implied photocurrent density in un-encapsulated 2T tandem architecture along with being compatible with high temperature production processes. For studying the performance of such tandem devices in real-world irradiance conditions and for different locations of the world, the effect of solar spectrum and angle of incidence on their optical performance is studied. Passing from mono-facial to bi-facial tandem solar cells, the photocurrent density in the bottom cell can be increased, requiring again optical optimization. Here, we analyse the effect of albedo, perovskite thickness and band gap as well as geographical location on the optical performance of these bi-facial perovskite/c-Si tandem solar cells. Our optical study shows that bi-facial 2T tandems, that also convert light incident from the rear, require radically thicker perovskite layers to match the additional current from the c-Si bottom cell. For typical perovskite bandgap and albedo values, even doubling the perovskite thickness is not sufficient. In this respect, lower bandgap perovskites are very interesting for application not only in bi-facial 2T tandems but also in related 3T and 4T tandems.

Sign in / Sign up

Export Citation Format

Share Document