Fast Formation of Biomimetic Ca-P Coatings on Ti6Al4V

1999 ◽  
Vol 599 ◽  
Author(s):  
F. Barrère ◽  
P. Layrolle ◽  
C. A. van Blitterswijk ◽  
K. de Groot
Keyword(s):  
Crystal Growth ◽  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Photoelectron Spectroscopy ◽  
Body Fluid ◽  
Growth Inhibitor ◽  
Passive Layer ◽  
Chemical Bonds ◽  
X Ray ◽  
Coating Formation

AbstractThe aim of this study was to accelerate the formation of biomimetic Calcium-Phosphate (Ca-P) coatings on Ti6Al4V by using a 5 times more concentrated Simulated Body Fluid (SBFx5) than the regular SBF. The production of SBFx5 was possible by decreasing the pH of the solution to approximately 6 with CO2 gas. The release of this mildly acidic gas allowed the formation of a Ca-P film after 4h of immersion at pH=6.8. The structure of this coating was an amorphous carbonated Ca-P. In addition, our experiments showed that the presence of Mg2+ was absolutely necessary for the Ca-P coating formation on Ti6Al4V substrate. Mg2+ is a crystal growth inhibitor and favored the heterogeneous nucleation. Furthermore, depth profile X-Ray Photoelectron Spectroscopy showed that Ca-P nucleation on the passive Titanium oxide (TiO2) passive layer was initiated by Ca2+ and Mg2+. The attachment of this Ca-P coating resulted probably from chemical bonds such as P-O-Ti and Ca-O-Ti. Ca was more present at the coating/substrate interface than P. Thereby Ca-O-Ti seems to be favored.

STUDY OF NICKEL ION RELEASE IN SIMULATED BODY FLUID FROM C+-IMPLANTED NICKEL TITANIUM ALLOY

2016 ◽  
Vol 23 (05) ◽  
pp. 1650045 ◽  
Author(s):  
MUHAMMAD AHSAN SHAFIQUE ◽  
G. MURTAZA ◽  
SHAHZAD SAADAT ◽  
ZEESHAN ZAHEER ◽  
MUHAMMAD SHAHNAWAZ ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Niti Alloy ◽  
Niti Shape Memory Alloy ◽  
Ion Release ◽  
Nickel Ion ◽  
Oxidation Layer ◽  
X Ray ◽  
Calcium Phosphate Precipitation

Nickel ion release from NiTi shape memory alloy is an issue for biomedical applications. This study was planned to study the effect of C[Formula: see text] implantation on nickel ion release and affinity of calcium phosphate precipitation on NiTi alloy. Four annealed samples are chosen for the present study; three samples with oxidation layer and the fourth without oxidation layer. X-ray diffraction (XRD) spectra reveal amorphization with ion implantation. Proton-induced X-ray emission (PIXE) result shows insignificant increase in Ni release in simulated body fluid (SBF) and calcium phosphate precipitation up to [Formula: see text][Formula: see text]ions/cm2. Then Nickel contents show a sharp increase for greater ion doses. Corrosion potential decreases by increasing the dose but all the samples passivate after the same interval of time and at the same level of [Formula: see text] in ringer lactate solution. Hardness of samples initially increases at greater rate (up to [Formula: see text][Formula: see text]ions/cm[Formula: see text] and then increases with lesser rate. It is found that [Formula: see text][Formula: see text]ions/cm2 ([Formula: see text] is a safer limit of implantation on NiTi alloy, this limit gives us lesser ion release, better hardness and reasonable hydroxyapatite incubation affinity.

scholarly journals Surface Analysis of Biodegradable Mg-Alloys after Immersion in Simulated Body Fluid

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1740 ◽  
Author(s):  
Darja Steiner Petrovič ◽  
Djordje Mandrino ◽  
Božidar Šarler ◽  
Jelena Horky ◽  
Andrea Ojdanic ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Photoelectron Spectroscopy ◽  
Body Fluid ◽  
Surface Composition ◽  
Degradation Kinetics ◽  
Mg Alloys ◽  
X Ray ◽  
Before And After ◽  
Immersion Testing ◽  
Homogeneous Composition

Two binary biodegradable Mg-alloys and one ternary biodegradable Mg-alloy (Mg-0.3Ca, Mg-5Zn and Mg-5Zn-0.3Ca, all in wt%) were investigated. Surface-sensitive X-ray photoelectron spectroscopy analyses (XPS) of the alloy surfaces before and after immersion in simulated body fluid (SBF) were performed. The XPS analysis of the samples before the immersion in SBF revealed that the top layer of the alloy might have a non-homogeneous composition relative to the bulk. Degradation during the SBF immersion testing was monitored by measuring the evolution of H2. It was possible to evaluate the thickness of the sample degradation layers after the SBF immersion based on scanning electron microscopy (SEM) of the tilted sample. The thickness was in the order of 10–100 µm. The typical bio-corrosion products of all of the investigated alloys consisted of Mg, Ca, P and O, which suggests the formation of apatite (calcium phosphate hydroxide), magnesium hydrogen phosphate hydrate and magnesium hydroxide. The bioapplicability of the analyzed alloys with regard to surface composition and degradation kinetics is discussed.

In Vitro Behavior of Magnesium Apatite Coatings in Organic Modified Simulated Body Fluid

2011 ◽  
Vol 299-300 ◽  
pp. 508-511
Author(s):  
Guo Chao Qi ◽  
Feng Jun Shan ◽  
Qiang Li ◽  
Jing Yuan Yu ◽  
Qu Kai Zhang
Keyword(s):  
Simulated Body Fluid ◽  
Photoelectron Spectroscopy ◽  
Body Fluid ◽  
Sol Gel ◽  
Dip Coating ◽  
X Ray ◽  
Coating Method ◽  
Sbf Solution ◽  
Dip Coating Method

Magnesium apatite (MA, (Ca9Mg)(PO4)6(OH)2) and Hydroxyapatite (HA) coatings were synthesized on Ti6Al4V substrates by a sol-gel dip coating method. Glucose and bovine serum albumin (BSA) were added to the standard simulated body fluid (SBF) separately to form organic-containing simulated body fluids. MA and HA coatings were immersed in standard and organic modified SBF for time periods of 4, 7, 14, 21 and 28 days at 37±1°C. The surface dissolution and deposition behavior of the coatings after soaking were examined with Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results show that glucose in SBF has no apparent effect on the deposition of new apatite from the solution. BSA in SBF shows retardation effect on the deposition of apatite by forming a protein dominant globular layer. This layer inhibits the further deposition of apatite from SBF solution.

IN-VITRO BEHAVIOUR OF BIPHASIC CALCIUM PHOSPHATE WITH DIFFERENT RATIO OF SILICA CONTENT IN SIMULATED BODY FLUID

2015 ◽  
Vol 23 (1) ◽  
pp. 1-14
Author(s):  
Sudirman Sahid ◽  
◽  
Nor Shahida Kader Bashah ◽  
Salina Sabudin ◽  
◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biphasic Calcium Phosphate ◽  
Silica Content

scholarly journals Lactoferrin/Calcium Phosphate-Modified Porous Ti by Biomimetic Mineralization: Effective Infection Prevention and Excellent Osteoinduction

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 992
Author(s):  
Song Chen ◽  
Yuanli He ◽  
Linna Zhong ◽  
Wenjia Xie ◽  
Yiyuan Xue ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Biomimetic Mineralization ◽  
Matrix Mineralization ◽  
X Ray ◽  
Porous Ti ◽  
Potential Applications ◽  
Modification Of Titanium

The surface modification of titanium (Ti) can enhance the osseointegration and antibacterial properties of implants. In this study, we modified porous Ti discs with calcium phosphate (CaP) and different concentrations of Lactoferrin (LF) by biomimetic mineralization and examined their antibacterial effects and osteogenic bioactivity. Firstly, scanning electron microscopy (SEM), the fluorescent tracing method, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and the releasing kinetics of LF were utilized to characterize the modified Ti surface. Then, the antibacterial properties against S. sanguis and S. aureus were investigated. Finally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell differentiation, extracellular matrix mineralization, and cytotoxicity. The results showed that the porous Ti discs were successfully modified with CaP and LF, and that the LF-M group (200 μg/mL LF in simulated body fluid) could mildly release LF under control. Further, the LF-M group could effectively inhibit the adhesion and proliferation of S. sanguis and S. aureus and enhance the osteogenic differentiation in vitro with a good biocompatibility. Consequently, LF-M-modified Ti may have potential applications in the field of dental implants to promote osseointegration and prevent the occurrence of peri-implantitis.

Bioactivity of Silver Doped Hydroxyapatite Scaffolds in Simulated Body Fluids

2014 ◽  
Vol 604 ◽  
pp. 175-179 ◽  
Author(s):  
Lasma Poca ◽  
Arita Dubnika ◽  
Dagnija Loca ◽  
Liga Berzina-Cimdina
Keyword(s):  
Simulated Body Fluid ◽  
Incubation Period ◽  
Powder Diffraction ◽  
Body Fluid ◽  
Body Fluids ◽  
Apatite Layer ◽  
X Ray ◽  
Simulated Body Fluids ◽  
Two Phases

In the present study, thein vitrobioactivity of silver-doped hydroxyapatite (HAp/Ag) scaffolds was investigated. HAp/Ag was prepared using two different modified wet precipitation methods. The X-ray powder diffraction (XRD) results showed, that sintered HAp/Ag samples prepared using method (I) contain two phases HAp and Ag, but samples prepared by method (II) contain three different phases - HAp, Ag and AgO. After 2 month incubation period in simulated body fluid (SBF), surface of HAp/Ag scaffolds was coated with bone-like apatite. Thickness of bone-like apatite layer increased from 2 μm up to 32 μm, increasing the incubation period.

Effect of Electrical Polarization on the Behavior of Bioactive Glass Containing MgO and B2O3 in SBF

2006 ◽  
Vol 309-311 ◽  
pp. 333-336
Author(s):  
Emiko Amaoka ◽  
Erik Vedel ◽  
Satoshi Nakamura ◽  
Yusuke Moriyoshi ◽  
Jukka I. Salonen ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Charged Surface ◽  
Depolarization Current ◽  
Electrical Polarization ◽  
Thermally Stimulated Depolarization Current ◽  
Thermally Stimulated Depolarization ◽  
Calcium Phosphate Precipitation

We investigated the electrical polarizability of MgO and B2O3 containing bioactive glass (MBG). The MBG material with good manufacturing properties but low bioactivity was electrically polarized at a high dc field. The electrical polarizability of MBG was evaluated by thermally stimulated depolarization current (TSDC) measurements and immersion in simulated body fluid (SBF). The early precipitation of calcium phosphate on the negatively charged surface of the treated MBG demonstrated the increased bioactivity of the material and confirmed its polarizability. It is suggested that the electrical interactions between the polarized MBG and ions in SBF promoted the formation of the calcium phosphate precipitation. Accordingly, the increased bioactivity of the MBG in SBF is suggested to demonstrate the conversion of MBG into electrovector ceramics by the polarization treatment.

Sign in / Sign up

Export Citation Format

Share Document