IN-VITRO BEHAVIOUR OF BIPHASIC CALCIUM PHOSPHATE WITH DIFFERENT RATIO OF SILICA CONTENT IN SIMULATED BODY FLUID

2015 ◽  
Vol 23 (1) ◽  
pp. 1-14
Author(s):  
Sudirman Sahid ◽  
◽  
Nor Shahida Kader Bashah ◽  
Salina Sabudin ◽  
◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biphasic Calcium Phosphate ◽  
Silica Content

scholarly journals Synthesis of Biphasic Calcium Phosphate and its Behaviour in Simulated Body Fluid

2016 ◽  
Vol 33 (2) ◽  
pp. 38
Author(s):  
X.V Bui ◽  
T.D Thang
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biphasic Calcium Phosphate ◽  
Simulated Body Fluid Solution ◽  
Static Condition ◽  
Xrd Analysis ◽  
Sem Images ◽  
Beta Tricalcium Phosphate

The main goal of this study is to elaborate and evaluate the physicochemical properties of the synthetic biphasic calcium phosphate (BCP) powder: an associate compound of hydroxyapatite (HA): Ca10(PO4)6(OH)2 and beta-tricalcium phosphate (β-TCP): Ca3(PO4)2. The new compound BCP has two advantages: high bioactivity (HA) and fast biodegradation (β-TCP). The obtained powder of BCP was prepared by the precipitate method. XRD analysis confirmed the synthetic material contained both HA and β-TCP crystalline phases. SEM images showed that the small particles of HA attached to bigger particles of β-TCP in the structure morphology of BCP. The in vitro experiment was carried out in static condition by soaking of a series of 50 mg BCP powder in 100 ml of simulated body fluid solution at different period of soaking time. The XRD and SEM methods studied the microstructureand chemical bond after soaking. The obtained results confirmed the bioactivity of synthetic BCP material by the formation of a new apatite layer on its surface.

Biomimetic Mineralization and Bioactivity of Phosphorylated Chitosan

2005 ◽  
Vol 288-289 ◽  
pp. 429-432 ◽  
Author(s):  
Zhi Qing Chen ◽  
Quan Li Li ◽  
Quan Zen ◽  
Gang Li ◽  
Hao Bin Jiang ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Crystal Nucleation ◽  
Osteoblast Proliferation ◽  
Biomimetic Mineralization ◽  
P Content ◽  
Proliferation And Differentiation ◽  
Nucleation Growth

Phosphorylated chitosans were synthesized as templates to manipulate hydroxyapatite (HA) crystal nucleation, growth and microstructure. Two kinds of insoluble phosphorylated chitosan were soaked in saturated Ca(OH)2 solution for 4 d and in 1.5× SBF (simulated body fluid) solutions for 14 d at 37 °C for biomimetic mineralization. A lower [P]-content of phosphorylated chitosan promoted greater mineralization than higher [P]-content. Phosphorylated chitosan inhibited osteoblast proliferation and differentiation in vitro, while calcium phosphate phosphorylated chitosan composites did not.

In Vitro Study Bioactivity of HA/UHMWPE Nanocomposites

2007 ◽  
Vol 342-343 ◽  
pp. 701-704
Author(s):  
Li Ming Fang ◽  
Yang Leng ◽  
Ping Gao
Keyword(s):  
Molecular Weight ◽  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
In Vitro Study ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Octacalcium Phosphate ◽  
Tof Sims ◽  
Ultrahigh Molecular Weight

Bioactivity of hydroxyapatite reinforced ultrahigh molecular weight polyethylene (HA/UHMWPE) nanocomposites with HA volume content of 10~50 % was evaluated by simulated body fluid (SBF) immersion. The effect of HA content on the capability for calcium phosphate (Ca- P) induction was studied. It was found that Ca-P deposition covered the whole surface of the composite with 30 vol. % of HA after immersion for 1 day and the layer grew to around 10 0m thick in one-week immersion, while there was few nucleus formed for composites with HA content lower than 30 vol. % after one-week immersion. The Ca-P structure was identified as octacalcium phosphate (OCP) by SEM, TEM, and ToF-SIMS.

Mechanical Properties and In Vitro Bioactivity of β-Tri Calcium Phosphate, Merwinite Nanocomposites

2011 ◽  
Vol 493-494 ◽  
pp. 582-587 ◽  
Author(s):  
Marziyeh Abbasi-Shahni ◽  
Saeed Hesaraki ◽  
Ali Asghar Behnam-Ghader ◽  
Masoud Hafezi-Ardakani
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Sem Analysis ◽  
In Vitro Bioactivity ◽  
Hard Tissue ◽  
Calcium Phosphate Layer

In this study, nanocomposites based on of β-tri calcium phosphate (β-TCP) and 2.5-10 wt% merwinite nanoparticles were prepared and sintered at 1100-1300°c.The mechanical properties were investigated by measuring compressive strength and fracture toughness. Structural properties were evaluated by XRD, TEM and SEM analysis, and the in vitro bioactivity was studied by soaking the samples in simulated body fluid (SBF). The mechanical strength of the sintered samples wereincreased, by increasing the amount of merwinite phase up to 5 wt%, whereas it decreased when the samples were sintered at 1100 and 1200°c. Nanostructured calcium phosphate layer was formed on the surfaces of the nanocomposites within 1 day immersion in simulated body fluid. Because of appropriate mechanical properties the composite is suggested to be used as substitute for hard tissue.

Corrosion Protection of Nano-biphasic Calcium Phosphate Coating on Titanium Substrate

2020 ◽  
Vol 16 (5) ◽  
pp. 779-792
Author(s):  
Ahlam M. Fathi ◽  
Howida S. Mandour ◽  
Hanaa K. Abd El-Hamid
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biphasic Calcium Phosphate ◽  
Titanium Surface ◽  
Electrochemical Impedance ◽  
Calcium Phosphates ◽  
Diffusion Method ◽  
Calcium Phosphate Coating ◽  
Chemical Compositions

Background: Increasing the bioactivity of metallic implants is necessary for biomaterial applications where hydroxyapatite (HA) is used as a surface coating. In industry, HA is currently coated by plasma spraying, but this technique has a high cost and produces coating with short-term stability. Objectives: In the present study, electrophoretic deposition (EPD) was used to deposit nano-biphasic calcium phosphate compound (β-tri-calcium phosphate (β-TCP) /hydroxyapatite (HA)) bio-ceramics on the titanium surface. The microstructural, chemical compositions and bioactivity of the β- TCP/HA coatings were studied in a simulated body fluid solution (SBF). Methods: Scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR) were used. Additionally, the antibacterial effect was studied by the agar diffusion method. The corrosion behavior of the β-TCP/HA coating on titanium surface (Ti) in the SBF solution at 37oC was investigated by means of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests. Results: The Ti surface modification increased its biocompatibility and corrosion resistance in the simulated body fluid. The antibacterial inhibition activity of the β-TCP/HA bio-ceramic was enhanced by electroless silver deposition. The enhanced properties could be attributed to the use of nano-sized biphasic calcium phosphates in a low-temperature EPD process. Conclusions: The β-TCP/HA and β-TCP/HA/Ag coatings well protect Ti from the corrosion in SBF and endow Ti with biocompatibility. The β-4-TCP/HA/Ag/Ti substrate shows good antibacterial activity.

Growth of Calcium Phosphate Coating on Ti-7.5Mo Alloy after Anodic Oxidation

2013 ◽  
Vol 334-335 ◽  
pp. 297-302 ◽  
Author(s):  
A.L.A. Escada ◽  
João Paulo Barros Machado ◽  
Roberto Zenhei Nakazato ◽  
Ana Paula Rosifini Alves Claro
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Calcium Phosphates ◽  
Sodium Titanate ◽  
Ammonium Fluoride ◽  
Biological Properties ◽  
Calcium Phosphate Coating ◽  
Phosphate Coating

Titanium and its alloys are widely used as biomaterials due to their mechanical, chemical and biological properties. To enhance the biocompatibility of titanium alloys, various surface treatments have been proposed. In particular, the formation of titanium oxide nanotubes layers has been extensively examined. Among the various materials for implants, calcium phosphates and hydroxyapatite are widely used clinically. In this work, titanium nanotubes were fabricated on the surface of Ti-7.5Mo alloy by anodization. The samples were anodized for 20 V in an electrolyte containing glycerol in combination with ammonium fluoride (NH4F, 0.25%), and the anodization time was 24 h. After being anodized, specimens were heat treated at 450 °C and 600°C for 1 h to crystallize the amorphous TiO2 nanotubes and then treated with NaOH solution to make them bioactive, to induce growth of calcium phosphate in a simulated body fluid. Surface morphology and coating chemistry were obtained respectively using, field-emission scanning electron microscopy (FEG-SEM), AFM and X-ray diffraction (XRD). It was shown that the presence of titanium nanotubes induces the growth of a sodium titanate nanolayer. During the subsequent in-vitro immersion in a simulated body fluid, the sodium titanate nanolayer induced the nucleation and growth of nanodimensioned calcium phosphate. It was possible to observe the formation of TiO2 nanotubes on the surface of Ti-7.5Mo. Calcium phosphate coating was greater in the samples with larger nanotube diameter. These findings represent a simple surface treatment for Ti-7.5Mo alloy that has high potential for biomedical applications.

Preparation of Biphasic Calcium Phosphate Porous Ceramics Prepared from Fine Powders with Different Particle Size and its Dissolution Behavior in Simulated Body Fluid

2007 ◽  
Vol 336-338 ◽  
pp. 1688-1691 ◽  
Author(s):  
Yin Zhang ◽  
Yoshiyuki Yokogawa ◽  
Tetsuya Kameyama
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Biphasic Calcium Phosphate ◽  
Porous Ceramics ◽  
Solid Loading ◽  
Dissolution Behavior ◽  
Phosphorous Content ◽  
Ft Ir ◽  
Sbf Solution

Biphasic calcium phosphate (BCP) ceramics, a mixture of hydroxyapatite (HAp) and betatricalcium phosphate (β-TCP), of varying HAp/β-TCP ratios was prepared. One kinds of HAp and one kind of β-TCP powders were used to produce porous BCP bioceramics with HAp/β-TCP weight rations of 20/80, 40/60, and 80/20. A slip was obtained by adding a mixed powders of HAp and β-TCP to a solution 1.5% of deflocculant and 0.5 wt% of foaming agent. The optimum value for the minimum viscosity in these present slips with respect to its solid loading and the optimum amount of the deflocculant were investigated. The specimen obtained by casting a polyurethane foam with 1.5 wt% of deflocculant into a slip, and drying it under vacuum, was heated at 1150°C for 3 hours. The resultant porous BCP sintered body had large spherical pores of 300 /m with interconnecting rectangular voids. Many small pores in the size range of 2-3 /m or below were observed in the specimen obtained by heating at 1150°C for 3 hours. The dissolution test was done as follows. The obtained porous ceramics samples about 0.5g individually soaked into 30 mL of simulated body fluid (SBF) solution at 36.5°C. The calcium and phosphorous content of the SBF solution was analyzed by ICP. The porous body was dried, and characterized using SEM, XRD, and FT-IR.

Growth of Calcium Phosphate Using Chemically Treated Titanium Oxide Nanotubes

2012 ◽  
Vol 16 ◽  
pp. 63-68 ◽  
Author(s):  
A.L.A. Escada ◽  
João Paulo Barros Machado ◽  
Sandra G. Schneider ◽  
Roberto Zenhei Nakazato ◽  
Ana Paula Rosifini Alves Claro
Keyword(s):  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Body Fluid ◽  
Calcium Phosphates ◽  
Melting Furnace ◽  
Sodium Titanate ◽  
Titanium Oxide Nanotubes ◽  
Naoh Solution ◽  
Cold Worked

Many materials with different surfaces have been developed for dental and orthopedics implants. Among the various materials for implants, titanium and bioactive ones such as calcium phosphates and hydroxyapatite, are widely used clinically. When these materials are inserted into bone several biological reactions occur. Thes processes can be associated with surface properties (topography, roughness and surface energy). In this work, ingots were obtained from titanium and molybdenum by using an arc-melting furnace. They were submitted to heat treatment at 1100°C for one hour, cooled in water and cold worked by swaging. Titanium nanotubes were fabricated on the surface of Ti-7,5Mo alloy by anodization, and then treated with NaOH solution to make them bioactive, to induce growth of calcium phosphate in a simulated body fluid. . It is shown that the presence of titanium nanotubes induces the growth of a sodium titanate nanolayer. During the subsequent in-vitro immersion in a simulated body fluid, the sodium titanate nanolayer induced the nucleation and growth of nano-dimensioned calcium phosphate. These titanium nanotubes can be useful as a well-adhered bioactive surface layer on Ti implant metals for orthopedic and dental implants.

Sign in / Sign up

Export Citation Format

Share Document