The Effect of Interfacial Free Energies on the Stability of Microlaminates

2000 ◽  
Vol 652 ◽  
Author(s):  
A. C. Lewis ◽  
A. B. Mann ◽  
D. van Heerden ◽  
D. Josell ◽  
T. P. Weihs
Keyword(s):  
Electron Microscopy ◽  
Grain Boundary ◽  
High Temperatures ◽  
Free Energies ◽  
Microstructural Stability ◽  
Creep Tests ◽  
Interfacial Energies ◽  
Transmission Electron ◽  
The Stability ◽  
Interfacial Free Energies

ABSTRACTLaminated composites with polycrystalline layers typically break down at high temperatures through grain boundary grooving and the pinch-off of individual layers. Such materials, when exposed to high temperatures, develop grooves where grain boundaries meet the interfaces between layers. The depths of the grooves are controlled by the ratios of grain boundary and interfacial free energies, γgb/γint. Depending on the dimensions of the grains, these grooves can extend through the entire layer, causing pinch-off at the grain boundary. This pinch-off destroys the layering and eventually leads to a gross coarsening of the microstructure. Because microstructural stability is critical to performance for most applications, the ability to understand and predict the stability of microlaminates is a necessary tool. An existing model of this capillarity-driven breakdown requires the interfacial free energies, γgb and γint, as input parameters. Both biaxial and uniaxial zero creep tests have been used in conjunction with transmission electron microscopy to measure these interfacial energies in Ag/Ni and Nb/Nb5Si3 microlaminates.

High-Resolution Transmission Electron Microscopy Studies of a Near Sigma11 Grain Boundary in alpha-Alumina

1994 ◽  
Vol 77 (2) ◽  
pp. 339-348 ◽  
Author(s):  
Thomas Hoche ◽  
Philip R. Kenway ◽  
Hans-Joachim Kleebe ◽  
Manfred Ruhle ◽  
Patricia A. Morris
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Grain Boundary ◽  
Transmission Electron ◽  
Alpha Alumina

Microstructures of a-axis oriented YBCO films made by hybrid plasma sputtering

1995 ◽  
Vol 10 (4) ◽  
pp. 803-809 ◽  
Author(s):  
W. Ito ◽  
A. Oishi ◽  
S. Mahajan ◽  
Y. Yoshida ◽  
T. Morishita
Keyword(s):  
Electron Microscopy ◽  
Grain Boundary ◽  
Anisotropic Growth ◽  
Plan View ◽  
Plasma Sputtering ◽  
Transmission Electron ◽  
Hybrid Plasma ◽  
Tilt Boundaries ◽  
Symmetrical Tilt ◽  
Twist Boundaries

Microstructures of a-axis oriented YBa2Cu3O7−x films made by newly developed de 100 MHz hybrid plasma sputtering were investigated using transmission electron microscopy (TEM). The films deposited on (110) NdGaO3 and (100) SrTiO3 substrates were found to grow in a perfect epitaxial fashion and with clear interface. The plan view of the TEM image showed that both films were comprised of two kinds of grains having the c axis aligning along two perpendicular directions in the plane with equal probability. The structures of the grain boundary, however, were found to be very different for the two films from the plan views. The film on NdGaO3 showed a lot of twist boundaries, while the film on SrTiO3 consisted of many symmetrical tilt boundaries and basal-plane-faced tilt boundaries. The type of grain boundary is determined by the anisotropic growth rates of the film between c direction and a-b direction.

Motion of Crystal/Crystal and Crystal/Amorphous Interfaces

1990 ◽  
Vol 183 ◽  
Author(s):  
J. L. Batstone
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Temperature ◽  
Grain Boundary ◽  
Boundary Motion ◽  
High Temperature Annealing ◽  
Thermally Activated ◽  
Transmission Electron ◽  
Grain Boundary Motion

AbstractMotion of ordered twin/matrix interfaces in films of silicon on sapphire occurs during high temperature annealing. This process is shown to be thermally activated and is analogous to grain boundary motion. Motion of amorphous/crystalline interfaces occurs during recrystallization of CoSi2 and NiSi2 from the amorphous phase. In-situ transmission electron microscopy has revealed details of the growth kinetics and interfacial roughness.

scholarly journals Improving stability of cerium oxide nanoparticles by microbial polysaccharides coating

2018 ◽  
Vol 83 (6) ◽  
pp. 745-757 ◽  
Author(s):  
Ivana Milenkovic ◽  
Ksenija Radotic ◽  
Branko Matovic ◽  
Marija Prekajski ◽  
Ljiljana Zivkovic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cerium Oxide ◽  
Aqueous Media ◽  
Suspension Stability ◽  
X Ray Diffraction ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir ◽  
Microbial Exopolysaccharides ◽  
The Stability

Cerium oxide (CeO2) nanoparticles (CONPs) are interesting biomaterials with various applications in biomedicine, cosmetics and the pharmaceutical industry, but with limited practical application because of their low stability in aqueous media. The aim of this study was to obtain CONPs with increased stability by coating the particles. Microbial exopolysaccharides (levan, pullulan) and glucose were used to prepare CONPs under different synthesis conditions. Coating was attempted by adding the carbohydrates during (direct coating) or after (subsequent coating) the synthesis of CONPs. The obtained nanoparticles were characterized by X-Ray diffraction analysis, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The suspension stability of the uncoated and coated CONPs in aqueous media was evaluated by measuring the hydrodynamic size, zeta potential and turbidity. The FT-IR spectra revealed the differences between coated CONPs and showed the success of subsequent coating with carbohydrates. Coating with carbohydrates improved the stability the CONP suspension by decreasing the size of aggregated particles. The suspensions of levan- and glucose-coated CONPs had the best stability. In this study, CONPs were prepared using non-toxic materials, which were completely environmentally friendly. The obtained results open new horizons for CONP synthesis, improving their biological applications.

scholarly journals SILVER NANOPARTICLES FROM MEDICINALLY IMPORTANT EUPHORBIA CYATHOPHORA EXTRACT: BIOSYNTHESIS, CHARACTERIZATION, AND ANTICANCER ACTIVITY.

2018 ◽  
Vol 11 (2) ◽  
pp. 154
Author(s):  
Robert Lotha ◽  
Aravind Sivasubramanian ◽  
Meenakshi Sundaram Muthuraman
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Cell Line ◽  
Aqueous Extract ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
The Stability ◽  
Ht 29 ◽  
Scanning Electron

Objective: The present study was aimed at the biosynthesis of silver nanoparticles (AgNPs) using aqueous extract of Euphorbia cyathophora leavesand testing their anticancer potential using HT-29 cell line model.Methods: Green synthesis of silver nanoparticles was obtained with the aqueous extract of E. cyathophora. The synthesized nanoparticles wereconfirmed initially by ultraviolet-visible spectroscopy. Further, scanning electron microscopy, transmission electron microscopy, and X-Ray diffractionstudies also ensured the presence of silver nanoparticles. Zeta potential studies revealed the stability of the silver nanoparticles.Results: Antioxidant and anticancer studies of the nanoparticles against HT-29 cell line exhibited remarkable results.Conclusion: This ensures that the synthesized nanoparticles play an important role in medicinal biology.

Structure, Composition and Stability of Heterophase Boundaries

1997 ◽  
Vol 3 (S2) ◽  
pp. 673-674
Author(s):  
M. Rühle ◽  
T. Wagner ◽  
S. Bernath ◽  
J. Plitzko ◽  
C. Scheu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Elevated Temperatures ◽  
Analytical Electron Microscopy ◽  
High Resolution Electron Microscopy ◽  
Advanced Materials ◽  
Bulk Crystals ◽  
Transmission Electron ◽  
Resolution Electron ◽  
The Stability

Heterophase boundaries play an important role in advanced materials since those materials often comprise different components. The properties of the materials depend strongly on the properties of the interface between the components. Thus, it is important to investigate the stability of the microstructure with respect to annealing at elevated temperatures. In this paper results will be presented on the structure and composition of the interfaces between Cu and (α -Al2O3. The interfaces were processed either by growing a thin Cu overlayer on α- Al2O3 in a molecular beam epitaxy (MBE) system or by diffusion bonding bulk crystals of the two constituents in an UHV chamber. To improve the adhesion of Cu to α -Al2O3 ultrathin Ti interlayers were deposited between Cu and α - Al2O3.Interfaces were characterized by different transmission electron microscopy (TEM) techniques. Quantitative high-resolution electron microscopy (QHRTEM) allows the determination of the structure (coordinates of atoms) while analytical electron microscopy (AEM) allows the determination of the composition with high spatial resolution.

Microstructural Studies of High Coercivity Nd15Fe77B8 Sintered Magnets

1987 ◽  
Vol 96 ◽  
Author(s):  
M. H. Ghandehari ◽  
J. Fidler
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Transmission Electron Microscopy ◽  
Grain Boundary ◽  
Electron Microprobe ◽  
Boundary Phase ◽  
High Coercivity ◽  
Transmission Electron ◽  
Microstructural Studies ◽  
Domain Reversal

ABSTRACTMicrostructures of Nd15−xDyxFe77B8 prepared by alloying with Dy, and by using Dy2O3 as a sinl'ken adidive, have been determined using electron microprobe and transmission electron microscopy. The results have shown a higher Dy concentration near the grain boundaries of the 2–14–1 phase for magnets doped with Dy2O 3, as compared to the Dy-alloyed magnets. A two-step post sintering heat treatment was also studied for the two systems. The resultant concentration gradient of Dy in the 2–14–1 phase of the oxide-doped magnets is explained by the reaction of Dy2O3 with the Nd-rich grain boundary phase and its slow diffusion into thg 4–14–1 phase. Increased Dy concentration near the grain boundary is more effective in improving the coercivity, as domain reversal nucleation originates at or near this region.

Localized dissolution of grain boundary T1 precipitates in Al-3Cu-2Li

2015 ◽  
Vol 33 (6) ◽  
pp. 395-401 ◽  
Author(s):  
Ramasis Goswami
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Boundary ◽  
Orientation Relationship ◽  
S Phase ◽  
Dissolution Behavior ◽  
Moist Air ◽  
Orientation Relation ◽  
Transmission Electron ◽  
Relationship Of

AbstractTransmission electron microscopy (TEM) was employed to investigate the dissolution behavior of nanocrystalline grain boundary T1 precipitates in Al-3Cu-2Li. These grain boundary T1 plates exhibit an orientation relation with matrix, with the (1-11)α-Al parallel to (0001)T1 and [022]α-Al parallel to [10-10]T1, which is similar to the orientation relationship of T1 plates formed within grains. TEM studies showed that these grain boundary T1 plates react readily in moist air. As a result of the localized dissolution, the Cu-rich clusters form onto T1, which is consistent with the localized dissolution behavior observed in nanocrystalline S phase in Al-Cu-Mg.

Sign in / Sign up

Export Citation Format

Share Document