Modeling Copper Diffusion in Silicon Oxide, Nitride, and Carbide

2002 ◽  
Vol 716 ◽  
Author(s):  
Vladimir Zubkov ◽  
Joseph Han ◽  
Grace Sun ◽  
Charles Musgrave ◽  
Sheldon Aronowitz
Keyword(s):  
Density Functional ◽  
Silicon Oxide ◽  
Copper Ions ◽  
Barrier Properties ◽  
Amorphous Oxides ◽  
Functional Theory ◽  
Copper Diffusion ◽  
The Difference ◽  
Stable Ring ◽  
Diffusion Properties

AbstractDensity functional theory was applied to simulate copper diffusion in silicon oxide, nitride, and carbide (SiOx, SiNx, SiCx). Because copper drift into oxide is significantly enhanced by negative bias, copper ions are the active diffusing species. Clusters and, in some cases supercells, modeling various ring configurations of the amorphous networks of silicon oxide, nitride, and carbide were employed. Interactions of both neutral copper and its cation, Cu+, with the network were explored. Calculations revealed a strong binding of Cu+ to SiOx, SiCx, and SiNx in contrast with neutral Cu. The Cu+ attraction to carbide clusters is significantly lower than to SiOx and SiNx, explaining the effective barrier properties of SiCx. The estimated lower bounds for activation energies for Cu+ hops between stable ring clusters of SiOx and SiNx are similar. This implies that the difference in Cu diffusion properties between oxides and nitrides is likely due to a higher percentage of large rings in amorphous oxides compared with nitrides. An approach to increasing the resistance of oxides to Cu+ diffusion is suggested.

scholarly journals Theoretical Study of the Structures of 4-(2,3,5,6-Tetrafluoropyridyl)Diphenylphosphine Oxide and Tris(Pentafluorophenyl)Phosphine Oxide: Why Does the Crystal Structure of (Tetrafluoropyridyl)Diphenylphosphine Oxide Have Two Different P=O Bond Lengths?

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2778
Author(s):  
Joseph R. Lane ◽  
Graham C. Saunders
Keyword(s):  
Crystal Structure ◽  
Hydrogen Bonding ◽  
Phosphine Oxide ◽  
Density Functional ◽  
Lone Pair ◽  
Diphenylphosphine Oxide ◽  
Functional Theory ◽  
Weak Hydrogen Bonding ◽  
Independent Molecules ◽  
The Difference

The crystal structure of 4-(2,3,5,6-tetrafluoropyridyl)diphenylphosphine oxide (1) contains two independent molecules in the asymmetric unit. Although the molecules are virtually identical in all other aspects, the P=O bond distances differ by ca. 0.02 Å. In contrast, although tris(pentafluorophenyl)phosphine oxide (2) has a similar crystal structure, the P=O bond distances of the two independent molecules are identical. To investigate the reason for the difference, a density functional theory study was undertaken. Both structures comprise chains of molecules. The attraction between molecules of 1, which comprises lone pair–π, weak hydrogen bonding and C–H∙∙∙arene interactions, has energies of 70 and 71 kJ mol−1. The attraction between molecules of 2 comprises two lone pair–π interactions, and has energies of 99 and 100 kJ mol−1. There is weak hydrogen bonding between molecules of adjacent chains involving the oxygen atom of 1. For one molecule, this interaction is with a symmetry independent molecule, whereas for the other, it also occurs with a symmetry related molecule. This provides a reason for the difference in P=O distance. This interaction is not possible for 2, and so there is no difference between the P=O distances of 2.

scholarly journals Quantum Chemistry Estimation of Adhesion Strength of Hydroxyapatite with Titanium Substrate

2021 ◽  
Vol 03 (04) ◽  
pp. 1-1
Author(s):  
Alla V. Balueva ◽  
◽  
Ilia N. Dashevskiy ◽  
Patricia Todebush ◽  
◽  
...  
Keyword(s):  
Adhesion Strength ◽  
Density Functional ◽  
Reaction Path ◽  
Titanium Substrate ◽  
Reaction Products ◽  
Functional Theory ◽  
Standard Material ◽  
The Difference ◽  
Ground Energy ◽  
Biocompatible Coatings

One of the ways to improve the fusion of an implant with bone tissue is through the use of biocompatible coatings, in particular, hydroxyapatite (HAp). It is important to assess the strength of the HAp adhesion to the implant. The measure of the strength of the bond of the coating with the substrate is the energy of this bond. Using density functional theory and molecular dynamics, the reaction path, reaction products, oscillation frequency, activation energy and bond energy between different combinations of component anions HAp and Ti (II) – the standard material of implants – are calculated. Using the computational chemistry software suite Gaussian 09 (Revision C.01 was used), the stable configurations of the reactants and products are found, and the binding energy of hydroxyapatite and titanium is then calculated based on the difference in ground energy of reactants and ground energy of products. Thus, the method of adhesion strength estimation between HAp coatings and Ti is proposed based on numerical calculations using MD software, and suggestions are provided on which conditions would be the best for optimal binding strength.

scholarly journals Theoretical Investigation of Energetic Salts with Pentazolate Anion

Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1783
Author(s):  
Hao-Ran Wang ◽  
Chong Zhang ◽  
Bing-Cheng Hu ◽  
Xue-Hai Ju
Keyword(s):  
Density Functional ◽  
Dft Method ◽  
Functional Theory ◽  
Calculated Density ◽  
The Density Functional Theory ◽  
Energetic Salts ◽  
Vertical Electron Affinity ◽  
The Difference ◽  
Nitrogen Contents ◽  
Experimental Density

Energetic salts based on pentazolate anion (cyclo-N5−) have attracted much attention due to their high nitrogen contents. However, it is an enormous challenge to efficiently screen out an appropriate cation that can match well with cyclo-N5−. The vertical electron affinity (VEA) of the cations and vertical ionization potential (VIP) of the anions for 135 energetic salts and some cyclo-N5− salts were calculated by the density functional theory (DFT). The magnitudes of VEA and VIP, and their matchability were analyzed. The results based on the calculations at the B3LYP/6-311++G(d,p) and B3LYP/aug-cc-pVTZ levels indicate that there is an excellent compatibility between cyclo-N5− and cation when the difference between the VEA of cation and the VIP of cyclo-N5− anion is −2.8 to −1.0 eV. The densities of the salts were predicted by the DFT method. Relationship between the calculated density and the experimental density was established as ρExpt = 1.111ρcal − 0.06067 with a correlation coefficient of 0.905. This regression equation could be in turn used to calibrate the calculated density of the cyclo-N5− energetic salts accurately. This work provides a favorable way to explore the energetic salts with excellent performance based on cyclo-N5−.

TIME-DEPENDENT DENSITY FUNCTIONAL STUDY OF MULTIELECTRON TRANSFER IN Cq+–Na4 COLLISIONS

2010 ◽  
Vol 24 (24) ◽  
pp. 4811-4820
Author(s):  
Y. P. ZHANG ◽  
F. S. ZHANG ◽  
Y. GAO ◽  
H. W. CHANG ◽  
G. Q. XIAO
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Local Density ◽  
Time Dependent ◽  
Functional Study ◽  
Density Approximation ◽  
Functional Theory ◽  
The Difference ◽  
Multielectron Transfer ◽  
Dependent Density

The process of multielectron transfer from a Na 4 cluster induced by highly charged C 6+, C 4+, C 2+ and C + ions is studied using the method of time-dependent density functional theory within the local density approximation combined with the use of pseudopotential. The evolution of dipole moment changes and emitted electrons in Na 4 is obtained and the time-dependent probabilities with various charges are deduced. It is shown that the Na 4 cluster is strongly ionized by C 6+ and that the number of emitted electrons per atom of Na 4 is larger than that of Na 2 under the same condition. One can find that the detailed information of the emitted electrons from Na 4 is different from the same from Na 2, which is possibly related to the difference in structure between the two clusters.

Oxides, Silicides, and Silicates of Zirconium and Hafnium; Density Functional Theory Study

2002 ◽  
Vol 716 ◽  
Author(s):  
Maciej Gutowski ◽  
John E. Jaffe ◽  
Chun-Li Liu ◽  
Matt Stoker ◽  
Anatoli Korkin
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Gate Dielectric ◽  
Density Functional Theory Calculations ◽  
Heat Of Formation ◽  
Density Functional Theory Study ◽  
Functional Theory ◽  
Exchange Correlation ◽  
The Difference ◽  
Constituent Elements

AbstractIt is known that the chemistries of hafnium and zirconium are more nearly identical than for any other two congeneric elements. Thus, both zirconia and hafnia, with the dielectric constant K > 20, have emerged as potential replacements for silica (K = 3.9) as a gate dielectric. We report an important difference between the zirconia/Si and hafnia/Si interfaces based on density functional theory calculations with the Perdew-Wang 91 exchange-correlation functional on the oxides, silicides, and silicates of Zr and Hf. The zirconia/Si interface has been found to be unstable with respect to formation of silicides whereas the hafnia/Si interface is stable. The difference between the two interfaces results from the fact that HfO2 is more stable than ZrO2 (i.e. has a larger heat of formation from its constituent elements) by more than 53 kJ/mol. The hafnium silicides, on the other hand, are less stable than zirconium silicides by ca. 20 kJ/mol.

Calculation of electronic structure and mechanical properties of DO3–Fe75-xSi25Nix intermetallic compounds by first principles

2015 ◽  
Vol 29 (13) ◽  
pp. 1550087
Author(s):  
R. Ma ◽  
M. P. Wan ◽  
J. Huang ◽  
Q. Xie
Keyword(s):  
Mechanical Properties ◽  
Intermetallic Compounds ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Elastic Parameters ◽  
Functional Theory ◽  
Ni Content ◽  
The Density Functional Theory ◽  
The Difference

Based on the density functional theory (DFT), the plane-wave pseudopotential method was used to investigate the electronic structures and mechanical properties of DO 3– Fe 75-x Si 25 Ni x(x = 0, 3.125, 6.25 and 9.375) intermetallic compounds. The elastic parameters were calculated, and then the bulk modulus, shear modulus and elastic modulus were derived. The paper then focuses on the discussion of ductility and plasticity. The results show that by adding appropriate Ni to Fe 3 Si intermetallic compound can improve the ductility. But the hardness will increase when the Ni content exceeds 6.25%. Analysis of density of states (DOS) and overlap populations indicates that with the difference of the strength of bonding and activity, there were some differences of ductility among different Ni contents. The Fe 71.875 Ni 3.125 Si 25 has the lowest hardness because the covalent bonding (Fe–Si bond and Si–Ni bond) has the minimum covalent electrons.

Anisotropically Nanostructured Silicon: A First-Principle Approach.

2004 ◽  
Vol 832 ◽  
Author(s):  
Yuri Bonder ◽  
Chumin Wang
Keyword(s):  
Experimental Data ◽  
Density Functional ◽  
First Principle ◽  
Hydrogen Atoms ◽  
Functional Theory ◽  
Nanostructured Silicon ◽  
Plane Anisotropy ◽  
The Density Functional Theory ◽  
The Difference ◽  
Good Agreement

ABSTRACTOptical properties of birefringent porous-silicon layers are studied within the density functional theory. Starting from a (110)-oriented supercell of 32 silicon atoms, columns of atoms in directions [100] and [010] are removed and the dangling bonds are saturated with hydrogen atoms. The results show an in-plane anisotropy in the dielectric function and in the refractive index (n). The difference Δn defined as n[110] -n[001] is compared with experimental data and a good agreement is observed. Also, the possibility in determining the morphology of pores by using polarized lights is analyzed.

Sign in / Sign up

Export Citation Format

Share Document