A New Method for Direct Determination of the Recoilless Fraction with Application to Magnetic Nanoparticles

2002 ◽  
Vol 721 ◽  
Author(s):  
Monica Sorescu
Keyword(s):  
Room Temperature ◽  
Average Particle Size ◽  
Direct Determination ◽  
Average Particle ◽  
Lattice Method ◽  
Recoilless Fraction ◽  
Single Room ◽  
Magnetite Particles ◽  
Physical Mixtures

AbstractWe propose a two-lattice method for direct determination of the recoilless fraction using a single room-temperature transmission Mössbauer measurement. The method is first demonstrated for the case of iron and metallic glass two-foil system and is next generalized for the case of physical mixtures of two powders. We further apply this method to determine the recoilless fraction of hematite and magnetite particles. Finally, we provide direct measurement of the recoilless fraction in nanohematite and nanomagnetite with an average particle size of 19 nm.

scholarly journals Effect of the polymeric coating over Fe3O4 particles used for magnetic separation

2010 ◽  
Vol 8 (5) ◽  
pp. 1041-1046 ◽  
Author(s):  
Raúl Reza ◽  
Carlos Martínez Pérez ◽  
Claudia Rodríguez González ◽  
Humberto Romero ◽  
Perla García Casillas
Keyword(s):  
Particle Size ◽  
Magnetite Nanoparticles ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Polymeric Coating ◽  
Average Particle ◽  
Synthesis Conditions ◽  
Aging Conditions ◽  
Magnetite Particles ◽  
Average Size

AbstractIn this work, the synthesis of magnetite nanoparticles by two variant chemical coprecipitation methods that involve reflux and aging conditions was investigated. The influence of the synthesis conditions on particle size, morphology, magnetic properties and protein adsorption were studied. The synthesized magnetite nanoparticles showed a spherical shape with an average particle size directly influenced by the synthesis technique. Particles of average size 27 nm and 200 nm were obtained. When the coprecipitation method was used without reflux and aging, the smallest particles were obtained. Magnetite nanoparticles obtained from both methods exhibited a superparamagnetic behavior and their saturation magnetization was particle size dependent. Values of 67 and 78 emu g−1 were obtained for the 27 nm and 200 nm magnetite particles, respectively. The nanoparticles were coated with silica, aminosilane, and silica-aminosilane shell. The influence of the coating on protein absorption was studied using Bovine Serum Albumin (BSA) protein.

Direct determination of biacetyl in fats by sensitized room temperature phosphorescence

1989 ◽  
Vol 227 ◽  
pp. 319-324 ◽  
Author(s):  
A. Cepeda-Saez ◽  
M.L. Vazquez ◽  
L. Sargi ◽  
P. Prognon ◽  
G. Mahuzier ◽  
...  
Keyword(s):  
Room Temperature ◽  
Direct Determination ◽  
Room Temperature Phosphorescence

Minimum Particle Diameter of the Vanadium/Iron Co-Doped Nano TiO2 Transparent Hydrosol at Room Temperature

2014 ◽  
Vol 989-994 ◽  
pp. 611-614
Author(s):  
Ling Li ◽  
Wen Ming Zhang ◽  
Hua Yan Zhang ◽  
Zi Hao Xu ◽  
Sen Wang ◽  
...  
Keyword(s):  
Particle Size ◽  
Room Temperature ◽  
Raw Materials ◽  
Average Particle Size ◽  
Particle Diameter ◽  
Ferric Nitrate ◽  
Average Particle ◽  
Hydrolysis Method ◽  
Vanadium Iron ◽  
Co Doped

Vanadium/iron co-doped nanoTiO2 transparent hydrosol with an average particle size of 3.8 nm was synthesized by a novel complexation-controlled hydrolysis method at room temperature and atmospheric pressure by using TiCl4, ferric nitrate, ammonium metavanadate, etc. as raw materials. The composition, phase structure, particle size, absorbance spectrum, and photocatalytic performance of samples were characterized by XRD, EDS, nanolaser particle size analyzer, and UV-Vis spectrophotometer. The photocatalytic properties of V/Fe doped TiO2 were studied through degrading acid 3R dye, and the results show that when the content of V/Fe was 0.5%, the degradation rate reached more than 96% under irridation for 60 min.

Microwave Properties of Polymer Composites Containing Combinations of Micro- and Nano-Sized Magnetic Fillers

2008 ◽  
Vol 8 (2) ◽  
pp. 650-654 ◽  
Author(s):  
Svetoslav Kolev ◽  
Tatyana Koutzarova ◽  
Andrey Yanev ◽  
Chavdar Ghelev ◽  
Ivan Nedkov
Keyword(s):  
Magnetic Material ◽  
Magnetocrystalline Anisotropy ◽  
Average Particle Size ◽  
Anisotropy Field ◽  
Anisotropy Constant ◽  
Strontium Hexaferrite ◽  
Filler Concentration ◽  
Average Particle ◽  
Effective Anisotropy ◽  
Magnetite Particles

We investigated the microwave absorbing properties of composite bulk samples with nanostructured and micron-sized fillers. As magnetic fillers we used magnetite powder (Fe3O4 with low magnetocrystalline anisotropy) and strontium hexaferrite (SrFe12O19 with high magnetocrystalline anisotropy). The dielectric matrix consisted of silicone rubber. The average particle size was 30 nm for the magnetite powder and 6 μm for the strontium hexaferrite powder. The micron-sized SrFe12O19 powder was prepared using a solid-state reaction. We investigated the influence of the filler concentration and the filler ratio (Fe3O4/SrFe12O19) in the polymer matrix on the microwave absorption in a large frequency range (1 ÷ 18 GHz). The results obtained showed that the highly anisotropic particles become centers of clusterification and the small magnetite particles form magnetic balls with different diameter depending on the concentration. The effect of adding micron-sized SrFe12O19 to the nanosized Fe3O4 filler in composites absorbing structures has to do with the ferromagnetic resonance (FMR) shifting to the higher frequencies due to the changes in the ferrite filler's properties induced by the presence of a magnetic material with high magnetocrystalline anisotropy. The two-component filler possesses new values of the saturation magnetization and of the anisotropy constant, differing from those of both SrFe12O19 and Fe3O4, which leads to a rise in the effective anisotropy field. The results demonstrate the possibility to vary the composite's absorption characteristics in a controlled manner by way of introducing a second magnetic material.

DIELECTRIC PROPERTIES OF ULTRAFINE Zn-DOPED CaCu3Ti4O12 CERAMIC

2012 ◽  
Vol 02 (01) ◽  
pp. 1250007 ◽  
Author(s):  
LAXMAN SINGH ◽  
U. S. RAI ◽  
K. D. MANDAL ◽  
MADHU YASHPAL
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Single Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sintered Powder

Ultrafine powder of CaCu2.80Zn0.20Ti4O12 ceramic was prepared using a novel semi-wet method. DTA/TG analysis of dry powder gives pre-information about formation of final product around 800°C. The formation of single phase was confirmed by X-ray diffraction analysis. The average particle size of sintered powder of the ceramic obtained from XRD and Transmission electron microscopy was found 59 nm and 102 nm, respectively. Energy Dispersive X-ray studies confirm the stoichiometry of the synthesized ceramic. Dielectric constant of the ceramic was found to be 2617 at room temperature at 1 kHz.

scholarly journals Magnetic and Structural Studies of CoFe2O4Nanoparticles Suspended in an Organic Liquid

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Branka Babić-Stojić ◽  
Vukoman Jokanović ◽  
Dušan Milivojević ◽  
Zvonko Jagličić ◽  
Darko Makovec ◽  
...  
Keyword(s):  
Room Temperature ◽  
Bulk Material ◽  
Organic Liquid ◽  
Average Particle Size ◽  
Hydrodynamic Diameter ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Ferrite Nanoparticle ◽  
Nanoparticle System

We present a study of magnetic and structural properties of CoFe2O4nanoparticles suspended in an organic liquid. Transmission electron microscopy shows that the nanoparticles have a narrow size distribution of average particle size 5.9 ± 1.0 nm. X-ray diffraction shows that the particles are of cubic spinel crystal structure. Dynamic light scattering measurements reveal the existence of an organic shell around the CoFe2O4nanoparticles with an average hydrodynamic diameter of 14.4 nm. Coercive magnetic field atT=5 K is found to be 11.8 kOe. Disappearance of the coercive field and remanent magnetization at about 170 K suggests that the CoFe2O4nanoparticles are superparamagnetic at higher temperatures which is confirmed by the room temperature Mössbauer spectrum analysis. Saturation magnetization of the nanoparticles of 80.8 emu/g(CoFe2O4) at 5 K reaches the value detected in the bulk material and remains very high also at room temperature. The cobalt ferrite nanoparticle system synthesized in this work exhibits magnetic properties which are very suitable for various biomedical applications.

Synthesis and Electromagnetic Properties of Hollow Ceramic Microspheres

2011 ◽  
Vol 492 ◽  
pp. 260-263 ◽  
Author(s):  
Bao Cai Xu ◽  
Jian Jiang Wang ◽  
Rong Xia Duan ◽  
Xing Jian Huo
Keyword(s):  
Reflection Loss ◽  
Structural Characteristics ◽  
Average Particle Size ◽  
Coaxial Line ◽  
Electromagnetic Properties ◽  
Flame Spraying ◽  
Average Particle ◽  
Composite Powders ◽  
Composite Microspheres

The hollow ceramic microspheres were prepared by Self-reactive flame spraying method. The structural characteristics and morphology properties of the composite powders were obtained by XRD and SEM. The results show that the obtained particles are hollow ceramic microspheres. The average particle size is about 30μm. An analytical method for the determination of electromagnetic parameters (ε, μ) of materials under test is presented by the analysis of normalized general matrix of equivalent network of coaxial line filled with samples. The analysis of vector network analyzer show that reflectance of hollow composite microspheres could well absorb microwaves in 2-18 GHz. The reflection loss is less than -l0dB in the range of 12.4 to15.2GHz while the minimum reflection loss is -18.5dB at 13.6GHz.

scholarly journals Monodispersed ZnO Nanoparticles and Their Use in Heterojunction Solar Cell

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Dinesh Patidar ◽  
Anusaiya Kaswan ◽  
N. S. Saxena ◽  
Kananbala Sharma
Keyword(s):  
Particle Size ◽  
Solar Cell ◽  
Ethylene Glycol ◽  
Zno Nanoparticles ◽  
Ultrasonic Treatment ◽  
Room Temperature ◽  
Power Conversion ◽  
Average Particle Size ◽  
Hexagonal Wurtzite Structure ◽  
Average Particle

Monodispersed ZnO nanoparticles have been synthesised in ethylene glycol medium using zinc acetate and sodium hydroxide at room temperature through ultrasonic treatment. The monodispersed ZnO nanoparticles were characterized by XRD, TEM, SEM, and optical spectroscopy. The results indicate that ZnO shows the hexagonal wurtzite structure having 8 nm average particle size with the band gap of 3.93 eV. ZnO nanoparticles blended with P3HT show the improvement in the interchains and intrachains ordering as compared to pure P3HT. The power conversion efficiency of P3HT/ZnO solar cell is found to be 0.88%, which is comparable with the result obtained by other researchers.

Sign in / Sign up

Export Citation Format

Share Document