scholarly journals RESEARCH OF THE EFFICIENCY OF THE GRAIN RECEPTION LINE OPERATION FROM AUTO TRANSPORT AT THE PROCUREMENT PRODUCTION GRAIN ELEVATOR

2021 ◽  
Vol 21 (2) ◽  
Author(s):  
G. Stankevych ◽  
A. Kats ◽  
O. Bondar

The results of the study of the characteristics of the technological line for grain reception from auto transport at the procurement production grain elevator of LLC ―Agricultural Enterprise ―Vesna 21‖ are presented. In the process of research, the quantitative and qualitative composition, volumes and duration of the harvesting periods of early and late crops, the quantitative and qualitative composition and characteristics of auto transport delivering grain to the enterprise were determined; the most intensive supply of early and late crops, as well as the actual coefficients of daily irregularity of their supply by auto transport.It is shown that the enterprise in 2017-2019 traditionally received such early crops as wheat of 2-6 classes and rapeseed of the highest and 1st class. Late crops were represented by corn (3rd class and non-class) and soybeans (non-standard and extruded). The volumes of harvesting of the corn and wheat (main crops)for the indicated years correlated, respectively (%) 49.2:41.2; 60.1: 24.9 and 66.1:17.1, which indicates a tendency for a significant increase in the supply of late crops, especially corn grain. The ratio between early and late crops for 2017–2019 was 45:55, 24:76 and 20:80, respectively (%).The monthly grain flow to the grain elevator was rather irregular. Most of the grain was received from July to December, when the periods of harvesting of early and late crops coincide, and especially in the autumn months, in September, October and November, up to 32.9 %, less – in the off-season from January to June, to 12.3 %. All the same, a lot of grain in percentage terms was received in November 2017 and October 2018 – 32.9 % each.An analysis of the quantitative and qualitative composition of cars that delivered grain to the procurement and production elevator in 2017-2019 showed that the carrying capacity of the vehicles ranged from 3 ... 51 tons. In 2017, 80.9% of all grain received by the enterprise was delivered by 2771 vehicles (cars) with a carrying capacity of 20 ... 40 tons, which amounted to 82.4 % of their annual quantity. In 2018, these indicators were as follows – 87.2 % of grain was delivered by 84.5% of vehicles of the same carrying capacity, and in 2019 – 93.4 % of grain was delivered by 93.0 % of the same vehicles. In the years studied, there was a tendency to an increase in the share of more heavy-duty vehicles (35...40 t). However, the number of vehicles with a carrying capacity of more than 40 tons, delivering significant volumes of grain, has significantly decreased, which is associated with the legislative limitation of the vehicles weight. The optimal carrying capacity in terms of the ratio of the mass of the delivered grain: the number of vehicles, taking into account legal restrictions, can be recommended 35...40 tons.The main characteristics of the reception of an early and late crops at the procurement and production elevator, respectively, for 2017-2018 were the following values: the duration of the arrival of early crops, days - 126, 119 and 97, late – 142, 145 and 240; harvesting period of early crops, days – 73, 88 and 68, late crops – 86, 78 and 57; the most intensive supply of early crops, t/day – 8378, 596 and 1428, late crops 1966, 1576 and 1909; actual coefficients of grain reception irregularity by auto transport of early crops – 6.3; 2.2 and 3.6, late – 2.5, 2.4 and 2.9, which exceeds the standard values of 1.6 and should be taken into account when improving the operation of the grain reception line.

2017 ◽  
Author(s):  
Chao Cui ◽  
Tieneng Guo ◽  
Yijie Wang ◽  
Qin Dai

2013 ◽  
Vol 650 ◽  
pp. 582-587
Author(s):  
Kwang Hee Im ◽  
Ki Youl Kim ◽  
Ki Taek Shin ◽  
Han Hee Lee ◽  
To Kang ◽  
...  

Bush is one of machine and automobile parts like brake used in drums and hubs in particular. Such bush parts are used for bearings of heavy-duty, large cars requiring wear resistance and high load carrying capacity. High temperature diffusion bonding has been applied for holding the both materials of the bushing together, which are outer steel materials and inner composite-sintered bushings. Therefore, it is very important evaluate the bonding integrity in manufacturing process. A simulation has been performed in order to evaluate the maximum defect sizes. Also, ultrasonic C-scan tests were performed for finding the defect in the composite-sintered bushings with the size of inherent flaws.


2011 ◽  
Vol 317-319 ◽  
pp. 1902-1907
Author(s):  
Tie Neng Guo ◽  
Qin Dai ◽  
Li Gang Cai

Heavy-duty hydrostatic rotary table is an important part of heavy-duty CNC gantry machine, which performance determines the machining accuracy and stability of the machine. Viscosity of hydraulic oil is one of the most important factors which influence the carrying capacity of the hydrostatic rotary table, but viscosity of hydraulic oil is directly determined by temperature. Therefore, the carrying capacity of the hydrostatic rotary table is directly determined by temperature. This paper researches the relative between the different workpiece quality, cutting force, oil chamber pressure, oil film thickness, oil film stiffness and temperature of hydrostatic rotary table by using the theoretical method, and validates the influence of temperature on the carrying capacity of the hydrostatic rotary table by using experimental method. It provides the basis for researching the influence of environmental temperature on the carrying capacity and stiffness of the oil film.


Foods ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2314
Author(s):  
Han Tang ◽  
Changsu Xu ◽  
Xin Qi ◽  
Ziming Wang ◽  
Jinfeng Wang ◽  
...  

The fluctuation effect of corn grain often occurs during the unloading stage. To accurately explore the periodic pulsation characteristics of corn grain during the unloading stage, a discrete model of corn grain was established, and the effectiveness of the discrete element method in simulating the corn grain unloading stage was verified by a 3D laser scanner and the “spherical particle filling method”. The grain cylinder was divided into six areas, and the periodic pulsation characteristics at different heights were explored through simulation tests. The results showed that the faster the average speed of corn grain changes in unit time, the more significant the periodic pulsation characteristics were as the height of grain unloading increased. The corn grain pulsateon in the grain cylinder exhibited gradual upward transmission and gradual amplification in the process of transmission. The average velocity decreased with increasing height. The direct cause of pulsation was the variation in the average stress between grain layers. Simulation analysis of grain unloading for different half cone angles of the grain cylinder was carried out. The change in corn grain average velocity over time in the area below 20 mm of the upper free surface was extracted. The results showed that the speed of the top corn grain increased with increasing the half cone angle, and the periodic pulsation phenomenon became more obvious with increasing the half cone angle at half cone angles of 30–65°. A half cone angle of 65–70° marked the critical state of corn grain flow changing from funnel flow to overall flow in the grain cylinder. This study provides a method for studying the periodic pulsation characteristics of different crops during the grain unloading stage and provides a technical reference for the safe design of grain unloading equipment.


1900 ◽  
Vol 50 (1289supp) ◽  
pp. 20665-20668
Author(s):  
Arthur Herschmann
Keyword(s):  

2020 ◽  
Vol 29 (5) ◽  
pp. 52-53
Author(s):  
A.V. Yaitskikh ◽  
◽  
O.I. Bundina ◽  
D.S. Stepanenko ◽  
◽  
...  

2020 ◽  
Vol 9 (1) ◽  
pp. 32-37
Author(s):  
Ruslan Hidayat ◽  
Saiful Arfaah

One of the most important factors in the structure of the pile foundation in the construction of the bridge is the carrying capacity of the soil so as not to collapse. Construction of a bridge in the village of Klitik in Jombang Regency to be built due to heavy traffic volume. The foundation plan to be used is a pile foundation with a diameter of 50 cm, the problem is what is the value of carrying capacity of soil and material. The equipment used is the Dutch Cone Penetrometer with a capacity of 2.50 tons with an Adhesion Jacket Cone. The detailed specifications of this sondir are as follows: Area conus 10 cm², piston area 10 cm², coat area 100 cm², as for the results obtained The carrying capacity of the soil is 60.00 tons for a diameter of 30 cm, 81,667 tons for a diameter of 35 cm, 106,667 tons for a diameter of 40 cm, 150,000 tons for a diameter of 50 cm for material strength of 54,00 tons for a diameter of 30 cm, 73,500 tons for a diameter of 35 cm, 96,00 tons for a diameter of 40 cm, 166,666 tons for a diameter of 50 cm


Sign in / Sign up

Export Citation Format

Share Document