urease enzyme
Recently Published Documents


TOTAL DOCUMENTS

155
(FIVE YEARS 77)

H-INDEX

15
(FIVE YEARS 2)

2022 ◽  
Vol 8 (1) ◽  
pp. 103-108
Author(s):  
Abd Hakim S

This study aims to characterize the tungsten-urea analyte indicator electrode. The method used is biosensor potentiometry with urease enzyme immobilization technique. This indicator electrode was coated with PVA-enzyme coated with glutaraldehyde (GA) 2.9% coated with PVC-KTpClPB- o-NPOE with o-NPOE variation of 61% and 66%. Characterization of coated indicator electrodes using SEM-EDS, FTIR and XRD analysis. A1-4 61% indicator electrode sample coated PVA-enzyme 1x coated with glutaraldehyde (GA) 2.9% 1x coated PVC-KTpClPB- o-NPOE 1x, with o-NPOE 61%. A3-4 61% indicator electrode sample coated PVA-enzyme 3x coated with glutaraldehyde (GA) 2.9% 1x coated PVC-KTpClPB- o-NPOE 1x, with o-NPOE 61%. Likewise, the reasoning of samples A1-4 66% and A3-4 66%. There are four indicator electrodes made with the notation A1-4 61%, A1-4 66%, A3-4 61% and A3-4 66%. The best results were obtained at the indicator electrode sample A1-4 61%, contributing to the urea sensor of the potentiometer cell


2022 ◽  
Vol 9 ◽  
Author(s):  
Jia He ◽  
Xunyu Mao ◽  
Yundong Zhou ◽  
Qiang Tang

Calcium carbonate precipitation and crystallization induced by urease enzyme to solidify soil is known as biocement technology. The uses of waste and cheap materials can make this technology more cost-effective and practical for applications. In this study, calcium ions were obtained by dissolving waste concretes in acidic liquid. Sand columns were treated by enzyme-induced carbonate precipitation (EICP) with either concrete-extracted calcium or reagent calcium for comparison. Compressive strengths, calcium carbonate contents, and microscopic analysis on the treated sand were carried out. It was found that the compressive strength of the former could reach 833 kPa in the dry state and 204 kPa in the wet state after 5 times of EICP treatment, both of which were higher than that of the latter. The calcium carbonate contents could reach 2–3% after 3–5 times of treatment. Based on the scanning electron microscope (SEM) and X-ray diffractometer (XRD) analyses, the crystal type of calcium carbonate produced in sand was calcite. The comparative results showed that the treatment effect using concrete-extracted calcium was similar or better than that using reagent calcium.


2021 ◽  
Vol 7 (SpecialIssue) ◽  
pp. 370-376
Author(s):  
Abd Hakim S

This study aims to characterize the phosphate buffer and urease enzymes through UV-Vis and SEM-EDS absorbance spectra using tungsten as an indicator electrode. The method used is a potentiometric biosensor with urease enzyme immobilization technique for urea analyte. A small detection range of 10-5-10-4M has been studied with PVA-enzyme coated indicator electrodes coated with PVC-KTpClPB. On this basis, the researchers increased the detection range by analyzing glutaraldehyde (GA) mixed with PVA-enzyme and o-NPOE mixed with PVC-KTpClPB. The best results of GA mixed PVA-enzyme at GA2.9% UV-Visible analysis. The best results were PVA-enzyme coated indicator electrodes coated with GA coated again with PVC-KTpClPB-o-NPOE SEM-EDS analysis on PVA-enzyme samples 3x coated with GA 1x and PVC-KTpClPB-o-NPOE 1x with o-NPOE variation of 61% and 66%.


Author(s):  
Wenle Hu ◽  
Wen-Chieh Cheng ◽  
Shaojie Wen ◽  
Ke Yuan

Given that acid-rich rainfall can cause serious damage to heritage buildings in NW China and subsequently accelerate their aging problem, countermeasures to protect their integrity and also to preserve the continuity of Chinese culture are in pressing need. Enzyme-induced carbonate precipitation (EICP) that modifies the mechanical properties of the soil through enhancing the interparticle bonds by the precipitated crystals and the formation of other carbonate minerals is under a spotlight in recent years. EICP is considered as an alternative to the microbial-induced carbonate precipitation (MICP) because cultivating soil microbes are considered to be challenging in field applications. This study conducts a series of test tube experiments to reproduce the ordinary EICP process, and the produced carbonate precipitation is compared with that of the modified EICP process subjected to the effect of higher MgCl2, NH4Cl, and CaCl2 concentrations, respectively. The modified EICP, subjected to the effect of higher MgCl2 concentrations, performs the best with the highest carbonate precipitation. The enhancement mechanism of carbonate precipitation is well interpreted through elevating the activity of urease enzyme by introducing the magnesium ions. Furthermore, the degradation of carbonate precipitation presents when subjected to the effect of higher NH4Cl concentration. The decreasing activity of urease enzyme and the reverse EICP process play a leading role in degrading the carbonate precipitation. Moreover, when subjected to the effect of higher CaCl2 concentrations, the slower rate of urea hydrolysis and the decreasing activity of urease enzyme are primarily responsible for forming the “hijacking” phenomenon of carbonate precipitation. The findings of this study explore the potential use of the EICP technology for the protection of heritage buildings in NW China.


Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6658
Author(s):  
Ishani P. Kalatuwawege ◽  
Medha J. Gunaratna ◽  
Dinusha N. Udukala

Gastrointestinal tract infection caused by Helicobacter pylori is a common virulent disease found worldwide, and the infection rate is much higher in developing countries than in developed ones. In the pathogenesis of H. pylori in the gastrointestinal tract, the secretion of the urease enzyme plays a major role. Therefore, inhibition of urease is a better approach against H. pylori infection. In the present study, a series of syn and anti isomers of N-substituted indole-3-carbaldehyde oxime derivatives was synthesized via Schiff base reaction of appropriate carbaldehyde derivatives with hydroxylamine hydrochloride. The in vitro urease inhibitory activities of those derivatives were evaluated against that of Macrotyloma uniflorum urease using the modified Berthelot reaction. Out of the tested compounds, compound 8 (IC50 = 0.0516 ± 0.0035 mM) and compound 9 (IC50 = 0.0345 ± 0.0008 mM) were identified as the derivatives with potent urease inhibitory activity with compared to thiourea (IC50 = 0.2387 ± 0.0048 mM). Additionally, in silico studies for all oxime compounds were performed to investigate the binding interactions with the active site of the urease enzyme compared to thiourea. Furthermore, the drug-likeness of the synthesized oxime compounds was also predicted.


2021 ◽  
Vol 23 (2) ◽  
pp. 104-113
Author(s):  
Rama Zaky Rahmawan ◽  
Muhammad Fauzan ◽  
Heriansyah Putra

Concrete is a material that has high compressive strength. However, concrete has a lower tensile strength than its compressive strength. As a result, the concrete often cracks and allows the entry of harmful substances such as  dan   causing corrosion of the reinforcement. Therefore, the repair method began to shift from the conventional way to the concept of self-healing concrete which involves the deposition of CaCO3. Precipitation can be done by the enzymatically – induced carbonate precipitation (EICP) method through a combination of urease, urea, and CaCl2 into a solution. This research used soybean extract as a substitute for pure urease enzyme. Variations in the concentration of soybean flour used as injection solution were variations in the content of soybean flour 15 g/L because it produced an optimum calcite mass of 2.62 grams. As a result, there was an increase in the compressive strength of BI against BR. In addition, there was a decreased value of permeability and porosity and the number of injections carried out. The increase in compressive strength, decrease in permeability, and decrease in porosity in concrete is due to CaCO3 deposition in the concrete which can cover the pores and cracks in the concrete.


2021 ◽  
pp. 875529302110416
Author(s):  
Mohammad Hassan Baziar ◽  
Omid Eslami Amirabadi

Currently, conventional remediation of liquefaction triggering may have many environmental effects, and this important issue has led researchers to look for more sustainable methods. In this research, one of the new bio-improvement methods (biogas) has been used to generate gas bubbles within a soil, susceptible to liquefaction. Using this method, two bio materials create ammonium ions and carbonate, in which ammonium ion is converted into nitrate due to the presence of bacteria in water, and they are eventually converted to nitrogen gas in an anaerobic condition. The nitrogen bubbles created in water reduce the soil’s degree of saturation, which in effect increases the soil’s resistance to liquefaction occurrence. In this study, two sources of urease enzyme were used to reduce the soil degree of saturation. The effects of various parameters, including the optimum concentration of each substance for optimum time to generate gas bubbles, as well as the effect of the oxygen amount in water were investigated using monotonic triaxial tests. The results illustrated that the addition of the mentioned two substances to the oxab (water with 60 ppm oxygen) or tap water decreased the pore water pressure due to desaturation. Finally, the energy approach was used to test the substance containing the amount of oxab with the highest decrease in pore water generation, here called “optimum selection,” in the cyclic triaxial device, and the results were analyzed to evaluate liquefaction occurrence. The outcome of these results revealed that compared with the strain energy of the non-treated sample, the treated sample had a much higher strain energy; in other words, the treated sample needed a larger amount of loading to trigger liquefaction.


2021 ◽  
Vol 13 (19) ◽  
pp. 10707
Author(s):  
Ayman El-Ghamry ◽  
El-Sayed El-Naggar ◽  
Abdallah M. Elgorban ◽  
Bin Gao ◽  
Zahoor Ahmad ◽  
...  

This research introduces a novel technology for reducing ordinary urea (OU) dissolution by developing double-coated urea (DCU) using phosphate rock (PR) as an outer layer to reduce its hydrolysis and sodium thiosulfate (STS) as an inner layer to inhibit the urease enzyme and nitrification process. Due to the double coating, the nitrogen content of DCU was lower than that of the OU (36.7% vs. 46.5%). The ultramorphological analysis using scanning electron microscopy (SEM) indicated that the controlled coating of urea, resulting from the outer layer of PR, was due to the adhesive effect of urea formaldehyde (UF), which was used as a glue. In addition, the transmission electron microscopy (TEM) analysis of the DCU revealed its high degree of agglomeration. The mechanical hardness of DCU was higher compared to that of OU (1.38 vs. 1.08 kgf). The seven-day dissolution rate test showed that OU reached 100% dissolution on the fifth day. The rate of DCU, however, was significantly lower (32% dissolution in the seventh day). Cumulative NO3− and NH4+ losses from a clay soil sample reached 68.3% and 7.6%, respectively, with OU measuring 40.5% compared to 4.9% for DCU 70 days after application. Field experiments showed a significant improvement in the marketable yield and agronomic nitrogen efficiency (ANE) of maize grains and zucchini fruits fertilized with DCU. Furthermore, the macro and micronutrient concentrations in maize grains and zucchini fruits showed an increase in the plants fertilized with DCU. In summary, double coating can be introduced as a novel technique to control urea dissolution in soil.


Processes ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1703
Author(s):  
Mukhtar Nuhu Yahya ◽  
Hüseyin Gökçekuş ◽  
Derin Orhon ◽  
Bülent Keskinler ◽  
Ahmet Karagunduz ◽  
...  

1. Background: Urea is the main product of the nitrogenous breakdown of protein metabolism in mammals. In this study, process intensification for enzymatic hydrolysis of urea by urease enzyme (jack bean urease) was examined in a membrane reactor. 2. Methods: Batch and continuous enzymatic hydrolysis reactions were performed at different substrate concentrations to determine the digestibility and affinity of the substrate with that of the enzyme. The hydrolysate samples were obtained by an optimized continuous enzyme membrane reactor (EMR) coupled with an ultra-filtration membrane (250 kDa). Feed concentration varied from 100 to 500 mg/L. Laboratory experiments were conducted at room temperature (20 ± 1 °C), with a flow rate of 20 mL/min, urease concentration of 0.067 g/L, ionic strength (I = 0, 0.01, 0.05), and ammonium nitrogen addition of (0, 100 mg/L, 200 mg/L, 500 mg/L). Moreover, the effect of ionic strength, ammonium nitrogen concentration, feed concentration, and enzyme concentration on urea hydrolysis was examined. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDAX) analysis were used to identify the physicochemical properties as well as the elemental composition of the Ultra-Filtration membrane used in this study. 3. Results: The study revealed that higher ionic strength and higher concentrations of NH4SO2 and ammonium nitrogen (NH3-N) inhibithydrolysis of urea by reducing the urease enzyme activity in the system over time. 4. Conclusions: Herein, a sustainable alternative for the conversion of urea to ammonia by utilizing urease in an EMR was demonstrated.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Asad Hamad ◽  
Mohsin Abbas Khan ◽  
Irshad Ahmad ◽  
Ruqaiya Khalil ◽  
Muhammad Khalid ◽  
...  

AbstractCurrent research is based on biology-oriented synthesis of sulphadiazine derivatives and determination of their urease inhibitory activity. In this regard, a series of (E)-4-(benzylideneamino)-N-(pyrimidin-2-yl)benzenesulfonamide was synthesized from sulphadiazine and substituted aromatic aldehydes. The structures of synthesized compounds were ascertained by spectroscopic techniques, such as, FTIR, NMR and HRMS analysis, and in-vitro and in-silico investigation were carried out for the inhibition of urease. Ureases are harmful for humans by producing by-products of urea (ammonia and carbon dioxide). The most active compound (3l) against urease exhibited IC50 value of 2.21 ± 0.45 µM which is 10 times more potent than the standard thiourea (20.03 ± 2.06 µM). It is noteworthy that most of our synthesized compounds showed significant to excellent activities against urease enzyme and most of them substituted by halogen or hydroxy groups at ortho and para positions in their structures. Inhibition of enzyme by the synthesized analogues was in descending order as 3l > 3a > 3b > 3q > 3e > 3o > 3s > 3t > 3g > 3k > 3r > 3f > 3m > 3p > 3n > 3j > 3i > 3h. Moreover, molecular docking studies were performed to rationalize the binding interactions of the synthesized motifs with the active pocket of the urease enzyme. The synthesized sulphadiazine derivatives (3a–u) were found to be non-toxic, and presented passive gastrointestinal absorption.


Sign in / Sign up

Export Citation Format

Share Document