scholarly journals Assessing the reaction conditions to mediate the milkfat-soybean oil enzymatic interesterification

2016 ◽  
Vol 19 (0) ◽  
Author(s):  
Ariela Veloso de Paula ◽  
Gisele Fátima Morais Nunes ◽  
Heizir Ferreira de Castro ◽  
Júlio César dos Santos
Keyword(s):  
Moisture Content ◽  
Soybean Oil ◽  
Rhizopus Oryzae ◽  
Immobilized Lipase ◽  
Fatty Acid Content ◽  
Structured Lipids ◽  
Nitrogen Atmosphere ◽  
Reaction Conditions ◽  
Oil Blend ◽  
The Ideal

Summary A food grade lipase from Rhizopus oryzae immobilized on a hybrid polysiloxane-polyvinyl alcohol matrix (SiO2-PVA) was used as the biocatalyst to mediate the interesterification reactions of a blend containing 65% milkfat and 35% soybean oil. All the reactions occurred in an inert nitrogen atmosphere in cylindrical glass reactors (80 mL) with 40 g of the milkfat-soybean oil blend. The influence of the following variables was evaluated: biocatalyst loading (250-1500 activity units per gram of blend), biocatalyst moisture content (5-20%), temperature (45-60 °C) and incubation time (2-48 h). The reactions were monitored by determining the free fatty acid content, triacylglycerol (TAGs) composition in carbon species, and the consistency of the interesterified (IE) products. The reaction conditions were set based on the parameters that provided a high interesterification yield and good consistency of the final product within the ideal range (200 to 800 gf cm-2). Hence the best results were obtained using a biocatalyst loading of 500 U g-1 of blend with 10% moisture content at 45 °C for 4 h. Under these conditions the consistency of the interesterified product was 539.7 ± 38 gf cm-2. The results demonstrated the potential of the immobilized lipase to alter the TAGs profile of the milkfat-soybean oil blend, allowing for the production of structured lipids.

Nutrient digestibility and ruminal fatty acid metabolism in lambs supplemented with soybean oil partially replaced by fish oil blend

2016 ◽  
Vol 216 ◽  
pp. 30-39 ◽  
Author(s):  
Evandro Maia Ferreira ◽  
Alexandre Vaz Pires ◽  
Ivanete Susin ◽  
Marcos Vinicius Biehl ◽  
Renato Shinkai Gentil ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fish Oil ◽  
Soybean Oil ◽  
Fatty Acid Metabolism ◽  
Acid Metabolism ◽  
Nutrient Digestibility ◽  
Oil Blend

Effect of Different Storage Conditions on Soybean Oil Acid Value

2014 ◽  
Vol 962-965 ◽  
pp. 1235-1238
Author(s):  
Mei Mei Hao ◽  
Xi Hong Li ◽  
Hai Dong Liu ◽  
Wei Qiao Yang ◽  
Chong Xiao Shao ◽  
...  
Keyword(s):  
Moisture Content ◽  
Soybean Oil ◽  
Acid Value ◽  
Storage Condition ◽  
Storage Conditions

Under the condition of nine kinds of storage, In this thesis, through the determination of acid value of soybean oil, to search for the best storage condition, used to prevent the soybean oil acid value rise, through the analysis of the acid value data, We find the best storage condition, is 0°C, 6% moisture content, and PVC plastic wrap packaging.

scholarly journals USE OF CERAMIC MATERIAL (CEMENT CLINKER) FOR THE PRODUCTION OF BIODIESEL

2013 ◽  
Vol 22 ◽  
pp. 71-78
Author(s):  
SUNNY SONI ◽  
MADHU AGARWAL
Keyword(s):  
Soybean Oil ◽  
Edible Oils ◽  
Methyl Esters ◽  
Catalytic Performance ◽  
Cement Clinker ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Rural Economic Development ◽  
Additional Demand ◽  
Biodiesel Fuels

Biodiesel is a renewable liquid fuel made from natural, renewable biological sources such as edible and non edible oils. Over the last years, biodiesel has gained more market due to its benefits and because it appears as the natural substitute for diesel. Reasons for growing interest in biodiesel include its potential for reducing noxious emissions, potential contributions to rural economic development, as an additional demand center for agricultural commodities, and as a way to reduce reliance on foreign oil. Biodiesel was prepared from soybean oil by transesterification with methanol in the presence of cement clinker. Cement clinker was examined as a catalyst for a conversion of soybean oil to fatty acid methyl esters (FAMEs). It can be a promising heterogeneous catalyst for the production of biodiesel fuels from soybean oil because of high activity in the conversion and no leaching in the transesterification reaction. The reaction conditions were optimized. A study for optimizing the reaction parameters such as the reaction temperature, and reaction time, was carried out. The catalyst cement clinker composition was characterized by XRF. The results demonstrate that the cement clinker shows high catalytic performance & it was found that the yield of biodiesel can reach as high as 84.52% after 1 h reaction at 65°C, with a 6:1 molar ratio of methanol to oil, 21 wt% KOH/cement clinker as catalyst.

scholarly journals A Robust Two-Step Process for the Efficient Conversion of Acidic Soybean Oil for Biodiesel Production

Catalysts ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 527 ◽  
Author(s):  
Gaojian Ma ◽  
Lingmei Dai ◽  
Dehua Liu ◽  
Wei Du
Keyword(s):  
Fatty Acid ◽  
Soybean Oil ◽  
Lower Cost ◽  
Immobilized Lipase ◽  
Acid Methyl Ester ◽  
Acid Value ◽  
Catalytic Performance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Negative Effect

Acidic oil, which is easily obtained and with lower cost, is a potential raw material for biodiesel production. Apart from containing large quantity of FFAs (free fatty acids), acidic oil usually contains some amount of inorganic acid, glycerides and some other complex components, leading to complicated effect on lipase’s catalytic performance. Exploring the efficient process of converting acidic oil for biodiesel production is of great significance to promote the use of acidic oil. A two-step conversion process for acidic soybean oil was proposed in this paper, where sulfuric acid-mediated hydrolysis was adopted first, then the hydrolyzed free fatty acid, collected from the upper oil layer was further subject to the second-step esterification catalyzed by immobilized lipase Novozym435. Through this novel process, the negative effect caused by harmful impurities and by-product glycerol on lipase was eliminated. A fatty acid methyl ester (FAME) yield of 95% could be obtained with the acid value decreased to 4 mgKOH/g from 188 mgKOH/g. There was no obvious loss in lipase’s activity and a FAME yield of 90% could be maintained with the lipase being repeatedly used for 10 batches. This process was found to have a good applicability to different acidic oils, indicating it has great prospect for converting low quality oil sources for biodiesel preparation.

scholarly journals Simplified Method to Optimize Enzymatic Esters Syntheses in Solvent-Free Systems: Validation Using Literature and Experimental Data

Catalysts ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1357
Author(s):  
Ronaldo Rodrigues de Sousa ◽  
Ayla Sant’Ana da Silva ◽  
Roberto Fernandez-Lafuente ◽  
Viridiana Santana Ferreira-Leitão
Keyword(s):  
Immobilized Lipase ◽  
Solvent Free ◽  
Molar Ratio ◽  
Mathematical Tool ◽  
Enzymatic Esterification ◽  
Reaction Conditions ◽  
Reaction Behavior ◽  
Optimum Reaction ◽  
Interesting Correlation ◽  
Using Data

The adoption of biocatalysis in solvent-free systems is an alternative to establish a greener esters production. An interesting correlation between the acid:alcohol molar ratio and biocatalyst (immobilized lipase) loading in the optimization of ester syntheses in solvent-free systems had been observed and explored. A simple mathematical tool named Substrate-Enzyme Relation (SER) has been developed, indicating a range of reaction conditions that resulted in high conversions. Here, SER utility has been validated using data from the literature and experimental assays, totalizing 39 different examples of solvent-free enzymatic esterifications. We found a good correlation between the SER trends and reaction conditions that promoted high conversions on the syntheses of short, mid, or long-chain esters. Moreover, the predictions obtained with SER are coherent with thermodynamic and kinetics aspects of enzymatic esterification in solvent-free systems. SER is an easy-to-handle tool to predict the reaction behavior, allowing obtaining optimum reaction conditions with a reduced number of experiments, including the adoption of reduced biocatalysts loadings.

Rapid room-temperature polymerization of bio-based multiaziridine-containing compounds

RSC Advances ◽  
2015 ◽  
Vol 5 (2) ◽  
pp. 1557-1563 ◽  
Author(s):  
Ruqi Chen ◽  
Jason S. Chen ◽  
Chaoqun Zhang ◽  
Michael R. Kessler
Keyword(s):  
Soybean Oil ◽  
Michael Addition ◽  
Room Temperature ◽  
Epoxidized Soybean Oil ◽  
Reaction Conditions ◽  
Acrylated Epoxidized Soybean Oil

Successful Michael addition under mild reaction conditions resulted in the grafting of 2-methyl aziridine onto acrylated epoxidized soybean oil, and the aziridine content was titrated as 0.00413 mol g−1.

scholarly journals New Grafted Copolymers Carrying Betaine Units Based on Gellan and N-Vinylimidazole as Precursors for Design of Drug Delivery Systems

Molecules ◽  
2020 ◽  
Vol 25 (22) ◽  
pp. 5451
Author(s):  
Stefania Racovita ◽  
Nicolae Baranov ◽  
Ana Maria Macsim ◽  
Catalina Lionte ◽  
Corina Cheptea ◽  
...  
Keyword(s):  
Graft Copolymerization ◽  
Polymer Concentration ◽  
Monomer Concentration ◽  
Ammonium Persulfate ◽  
Nitrogen Atmosphere ◽  
Sustained Drug Release ◽  
Reaction Conditions ◽  
Grafted Polymer ◽  
Grafted Copolymer ◽  
Grafting Reaction

New grafted copolymers possessing structural units of 1-vinyl-3-(1-carboxymethyl) imidazolium betaine were obtained by graft copolymerization of N-vinylimidazole onto gellan gum followed by the polymer-analogous reactions on grafted polymer with the highest grafting percentage using sodium chloroacetate as the betainization agent. The grafted copolymers were prepared using ammonium persulfate/N,N,N′,N′ tetramethylethylenediamine in a nitrogen atmosphere. The grafting reaction conditions were optimized by changing one of the following reaction parameters: initiator concentration, monomer concentration, polymer concentration, reaction time or temperature, while the other parameters remained constant. The highest grafting yield was obtained under the following reaction conditions: ci = 0.08 mol/L, cm = 0.8 mol/L, cp = 8 g/L, tr = 4 h and T = 50 °C. The kinetics of the graft copolymerization of N-vinylimidazole onto gellan was discussed and a suitable reaction mechanism was proposed. The evidence of the grafting reaction was confirmed through FTIR spectroscopy, X-ray diffraction, 1H-NMR spectroscopy and scanning electron microscopy. The grafted copolymer with betaine structure was obtained by a nucleophilic substitution reaction where the betainization agent was sodium chloroacetate. Preliminary results prove the ability of the grafted copolymers to bind amphoteric drugs (cefotaxime) and, therefore, the possibility of developing the new sustained drug release systems.

Sign in / Sign up

Export Citation Format

Share Document