scholarly journals [NO TITLE AVAILABLE]

2012 ◽  
Vol 32 (3) ◽  
pp. 621-628
Author(s):  
Grazielle Gebrim Santos ◽  
Mara Reis Silva
Keyword(s):  
Chemical Properties ◽  
Ice Cream ◽  
Physical And Chemical Properties ◽  
Low Fat ◽  
Fat Replacers ◽  
Sugar Substitutes ◽  
Physical Chemical ◽  
Physical And Chemical ◽  
Microbiological Analyses ◽  
And Chemical Properties

The effect of replacing shortening and sugar on the physical and chemical properties of mangaba ice cream and its acceptability were evaluated. Ice cream formulations were tested with the following fat replacers: Selecta Light, Litesse, and Dairy Lo and the following sugar substitutes: Lactitol and Splenda. All formulations were subjected to physical, chemical, and microbiological analyses and evaluated by acceptability tests. In the sensory analysis, it was observed a larger acceptance of the formulations containing Selecta Light (SL) and the combination of Litesse, Lactiol, and Splenda (LLS). The largest reduction in total energetic value (50%) was observed in the formulation LLS. The use of fat and/or sugar substitutes caused a reduction in the air incorporation (overrun) and affected viscosity. The highest melting speed was observed in the formulation with Dairy-Lo, Lactitol, and Splenda. All formulations showed good levels of global acceptability and appearance. The substitution of shortening for fat replacers caused a reduction in air incorporation and changes in ice-cream viscosity. The low-fat mangaba ice-cream elaborated with Selecta Light was the best formulation in terms of viscosity and air incorporation when compared with the control. It also showed a good level of acceptability and low fat content.

scholarly journals PRODUÇÃO E CARACTERIZAÇÃO DE BIOCARVÃO A PARTIR DE BIOSSÓLIDOS ARMAZENADOS EM BAG’s GEOTÊXTEIS NO MUNICÍPIO DE RANCHARIA -SP

2019 ◽  
Vol 11 (4) ◽  
pp. 142-155
Author(s):  
Beatriz Regina de Ângelo ◽  
Rafaela Pelegrini Vital ◽  
Marcelo Rodrigo Alves ◽  
Jaqueline Oliveira da Silva ◽  
Melissa Arantes Pinto ◽  
...  
Keyword(s):  
Organic Matter ◽  
Sewage Sludge ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Pyrolysis Process ◽  
Physical Chemical ◽  
Physical And Chemical ◽  
Stable Material ◽  
And Chemical Properties

Sewage sludge refers to a nutrient-rich by-product and organic matter from treatment plants and has become a challenge for many research segments to find a rational and sustainable destination for this material. In this context, the carbonization of biomass (by the pyrolysis process) results in biochar, characterized by a very stable material with specific physical and chemical properties and can represent a very important tool for this challenge. Thus, the objective of the present work was to transform, bypyrolysis process, small portions of the biosolid generated in Rancharia ETE into biochar. In addition, both the biosolid and the generated bicarbons were subjected to physical, chemical and structural analyzes in order to proceed with their respective characterization. From the analysis, it was found that the treatment submitted to temperature of 550°C as the best option for possible applications.Keywords:biosolid; pyrolysis; biochar.

The Physical and Chemical Properties Changes of Broth during Phellinus fermentation

2013 ◽  
Vol 295-298 ◽  
pp. 279-282
Author(s):  
Zi Ping Zhu ◽  
Jian Zhong Chen ◽  
Bei Bei Lv ◽  
Xue Ming Tang
Keyword(s):  
Fermentation Process ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Soluble Protein Content ◽  
Physical Chemical ◽  
Initial Stage ◽  
Increasing Trend ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Variation Tendency

The physical and chemical properties changes of broth in the fermentation process of Phellinus and its mutant strain were studied. The results showed that the mycelia yield of the two strains of Phellinus increased rapidly in the first 6 days and increased slowly 6 days later, the soluble protein content of broth took on an increasing trend, up to 0.15 mg/mL and 0.13 mg/mL respectively, the variation tendency of the content of polysaccharide and viscosities of broth were semblable, that was declined in the initial stage of fermentation and change little in later stage. The physical, chemical properties and viscosities show similarity in both two strains’ broth, therefore, the physical and chemical properties of broth in the fermentation process of Phellinus changed regularly.

Study of Corrosion-Electrochemical Behavior of Aluminum-Beryllium Alloys Alloyed with Yttrium, Lanthanum and Cerium

2012 ◽  
Vol 510-511 ◽  
pp. 233-240
Author(s):  
A.S. Safarov ◽  
T.D. Dzhuraev ◽  
M.I. Halimova ◽  
Z.M. Karieva
Keyword(s):  
Experimental Data ◽  
Corrosion Resistance ◽  
Electrochemical Behavior ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Physical Chemical ◽  
Foundry Alloys ◽  
Physical And Chemical ◽  
Corrosion Electrochemical Behavior ◽  
And Chemical Properties

Advantage of alloys on the basis of system Al-Be,Al-Be-REM is raised technological, physical, chemical and corrosion resistance properties in damp and excessively aggressive atmospheres [. According to literary reviews, this alloys basically are foundry-hypoeuthectic and hypereuthectic, and the technology of moulding of these alloys very difficult and demands application of operations modifying. Difficultly deleted impurity basically (Fe), specifically influence phase structure, naturally influencing on physical and chemical properties industrial silumines with the maintenance not less than 0.4-0.5 %. Many additives as Fe, Mg, Ti, Be, especially in hypoeuthectic silumines increasing strength and foundry properties, can reduce them corrosion-resistance. In connection with the above-stated is of interest researches of influence of impurity such elements as, Be and REM on corrosion resistance industrial alumines. Studies corrosion-resistance spent samples potentiostatic a method on device " Potentiostate P-50" with a registering recorder in the environment of the muriatic solutions in a mode "Potential". he analysis of experimental data have shown, that addition Be, positively modifying structure of foundry alloys, reduces influences containing in it Fe, increases strength and corrosion resistance, which calculations testify experimental data of electrochemical indicators [2,3].

Comprehensive Review on pH and Nutrients Detection Sensitive Materials and Methods for Agriculture Applications

2019 ◽  
Vol 17 (9) ◽  
pp. 663-670 ◽  
Author(s):  
A. Akshaya Kumar ◽  
S. K. Naveen Kumar
Keyword(s):  
Chemical Properties ◽  
Strong Relationship ◽  
Review Article ◽  
Ion Selective Electrodes ◽  
Optical Parameters ◽  
Physical And Chemical Properties ◽  
Physical Chemical ◽  
Materials Used ◽  
Physical And Chemical ◽  
And Chemical Properties

This review article elaborates the pH and nutrients detection sensitive materials and methods along with their principle of operations, merits, demerits, and application area. The sensitive materials used in the sensors react with the analytes and shows variation in electrical, physical, chemical, biological and optical parameters. The glass probe method, optical light spectroscopy, ion-selective electrodes, ion-selective field effective transistors, electrochemical interdigitated conductimetric method and microcantilever methods are the predominant techniques to detect the pH and nutrients in various medium. Most of the researchers have discussed the fabrication of pH and nutrients sensors individually in various applications, but very few numbers of sensitive materials and techniques discussed to detect the pH and nutrients in the soil. There is a strong relationship between pH and nutrients in the soil based on a number of important physical and chemical properties of the soil. We are strongly recommending that soil pH and nutrients measuring sensors can develop through the combinational approach of pH and nutrients with the help of nanostructured materials, seems to be more effective for agriculture applications.

scholarly journals Nanoparticle synthesis approaches at a glance

2019 ◽  
Vol 2 (3) ◽  
pp. 1-10
Author(s):  
Wali Muhammad ◽  
Iqra Haleem ◽  
Naimat Ullah ◽  
Muhammad Qasim Khan ◽  
Senthil Kumar N
Keyword(s):  
Nanoparticle Synthesis ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
New Era ◽  
Physical Chemical ◽  
Scientists And Engineers ◽  
Physical And Chemical ◽  
And Chemical Properties

Nanotechnology has opened a new era for scientists and engineers to build nanomaterials with diverse applications. Nowadays, nanotechnology plays a vital rolein each and every sector due to its extraordinary physical and chemical properties. It deals with development and synthesis of variety of nanoparticles (NPs), which ranging from 1 to 100 nm. The major approaches used for the synthesis of NPs are top to bottom and bottom to up which mainly included physical, chemical and biological methodologies. This mini review highlights synthesis of NPs through various approaches specifically targeted biological route.

scholarly journals Morphogenetic features of properties of initial carbonate soils

2013 ◽  
pp. 324-332
Author(s):  
Roman Semashchuk
Keyword(s):  
Chemical Analysis ◽  
Key Words ◽  
Carbonate Rocks ◽  
Chemical Properties ◽  
Morphological Properties ◽  
Physical And Chemical Properties ◽  
Agricultural Plant ◽  
Physical Chemical ◽  
Physical And Chemical ◽  
And Chemical Properties

Results of studies of key morphological, physical-chemical and chemical properties of underdeveloped carbonate soils, which are influenced by woody, herbaceous and agricultural plant formations on eluvium-delluvium carbonate rocks, were given. Key words: initial soils, morphological properties, physical and chemical properties, gross chemical analysis.

scholarly journals Geotechnical and Physico-Chemical Characterization of Low Lime Fly Ashes

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Arif Ali Baig Moghal
Keyword(s):  
Chemical Properties ◽  
Chemical Characterization ◽  
Relative Importance ◽  
Physical And Chemical Properties ◽  
Fly Ashes ◽  
Physical Chemical ◽  
Physico Chemical ◽  
Physical And Chemical ◽  
And Chemical Properties

In order to explore the possibility of using low-lime fly ashes, the physical and chemical properties which have a direct bearing on their geotechnical and geoenvironmental behaviors have been investigated. In this paper, two types of low-lime fly ashes, originating from India, have been used. A brief account of various methods adopted in characterizing their physical, chemical, and geotechnical properties is presented. The relative importance of each of these properties in enhancing the bulk applicability of fly ashes has been brought out.

scholarly journals SuperMALT: Physical and Chemical Properties of Massive and Dense Clumps

2017 ◽  
Vol 13 (S332) ◽  
pp. 254-260
Author(s):  
Sudeep Neupane ◽  
Guido Garay ◽  
Yanett Contreras ◽  
Keyword(s):  
Angular Resolution ◽  
Chemical Properties ◽  
Evolutionary Stage ◽  
Physical And Chemical Properties ◽  
Line Profiles ◽  
High Excitation ◽  
Physical Chemical ◽  
Molecular Lines ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractThe SuperMALT survey is observing 76 MALT90 clumps at different evolutionary stages (from pre-stellar or quiescent to HII) in high excitation molecular lines and key isotopomers using the Apex 12m telescope with an angular resolution of ∼20” and a velocity resolution of ∼0.1 km/s. The aim of this survey is to determine the physical, chemical, and kinematical properties of the gas within clumps as they evolve. Here we report some preliminary results based on observations of the J=3-2 & 4-3 lines of HNC, HCN, HCO+, N2H+ and of the J=3-2 line of the isotopologue H13CO+. We find that the morphologies and line profiles vary with the evolutionary stage of the clumps. The average line width increases from quiescent to HII clumps while line ratios show hint of chemical differences among the various evolutionary stages.

scholarly journals Evaluasi sifat fisika, kimia dan kandungan logam berat di dalam nata de coco yang dibuat menggunakan sumber nitrogen dari NPK

2021 ◽  
Vol 12 (2) ◽  
pp. 250-256
Author(s):  
Budi Santosa ◽  
Wirawan Wirawan
Keyword(s):  
Heavy Metals ◽  
Chemical Properties ◽  
Nitrogen Sources ◽  
Total Sample ◽  
Fiber Content ◽  
Physical And Chemical Properties ◽  
Physical Chemical ◽  
Physical And Chemical ◽  
Cu And Zn ◽  
And Chemical Properties

Nata de coco one of the beverage products produced from fermented coconut water using the help of starter Acetobacter xylinum. This product is very popular with people ranging from children to parents because the shape and texture resembles a gel.  This study aims to evaluate the physical, chemical and heavy metal content in nata de coco made using nitrogen sources from NPK. The experimental plan used by The Complete Randomized Plan (RAL) is a single factor, the factor is the concentration of NPK consisting of 5 levels of K1 = 0.25%, K2 = 0.5%, K3 = 1%, K4 = 1.5%, K5 = 2%.  Each treatment was repeated 5 times and the total sample observed a total of 25 pieces. The observed observation parameters of nata thickness, nata weight, total fiber content of nata and metal residue content in nata include Cu, Zn, Pb metals, all of which are observed at the end of fermentation (the 14th day of fermentation). The initial parameters of the formation of nata are observed from the beginning of fermentation until the nata sheet is first formed. The results showed that nata de coco made using nitrogen source from NPK concentration of 0.1% has the best physical and chemical properties namely thickness of nata: 1,438 cm, weight of nata: 309 grams, initial formation of nata 3.2 days and total fiber content of nata: 4.024%. The use of NPK produces residues in the form of heavy metals Cu and Zn while pb heavy metals are undetectable. The higher the concentration of NPK given as a source of nitrogen, the higher the residues of heavy metals Cu and Zn in the nata de coco.

scholarly journals Determination of some physical-chemical properties of biofortification soft wheat and flour of the varieties “Treska”

2017 ◽  
Vol 1 (9) ◽  
Author(s):  
Marija Menkinoska ◽  
Vinko Stanoev ◽  
Valentina Pavlova ◽  
Tatijana Blazevska ◽  
Victorija Stamatovska ◽  
...  
Keyword(s):  
Foliar Application ◽  
Chemical Properties ◽  
Milling Process ◽  
Ash Content ◽  
Cereal Crops ◽  
Physical And Chemical Properties ◽  
Physical Chemical ◽  
Physical And Chemical ◽  
And Chemical Properties

Cereal crops as a basic food for humans, little is used as a grain, but with millingthey are processed in the milling products: flour, meal, flakes and bran.Determining the content of some ingredients, such as protein, ash, wet gluten,fat, etc. in food products is important because they are present in the rawmaterials and final products. The importance of knowing the physical andchemical properties of wheat and flour is due to the determination of quality andkind of flour which is produced after milling process. The aim of this research isto examine the influence of Fe-EDTA fertilizers through soil, foliar and soil +foliarapplication on some physical and chemical properties of bio-fortification softwheat and flour of the varieties ,,Treska ,, During the investigation wedetermined the highest ash content in the seed obtained with soil + foliarapplication of iron, while in the flour was measured the highest ash content bysoil application of iron. We concluded that the supplement iron in soil increasethe percentage of protein in the grain and flour. We found that soil + foliarapplication of iron leads to a significant increase of % fat and wet gluten in grainand flour compared to soil or foliar application of chelating fertilizers. It might beconcluded that the agronomic bio-fortification with Fe-EDTA soil + foliarapplication and Fe-EDTA soil leads to improved examined physical - chemicalproperties of wheat and flour.

Sign in / Sign up

Export Citation Format

Share Document