scholarly journals Water quality index using multivariate factorial analysis

2010 ◽  
Vol 14 (5) ◽  
pp. 517-522 ◽  
Author(s):  
Christiane Coletti ◽  
Roberto Testezlaf ◽  
Túlio A. P. Ribeiro ◽  
Renata T. G. de Souza ◽  
Daniela de A. Pereira

The evaluation of environmental effects generated by agricultural production on water quality became essential in Brazil after the creation of policies for the use and conservation of water resources. For such, water quality indices have been considered with the purpose of showing the spatial and temporal variation of water quality in a watershed. The objective of this study was to develop a water quality index (WQI) applying the Multivariate Factorial Analysis (MFA) statistical technique, which could indicate the influence of agricultural activities in the quality of water resources. Water in a predominantly farm watershed was monitored from Sept. 2003 to Sept. 2004. Monthly water collections were carried out at six sample points, and eight parameters were analyzed: nitrate, ammoniacal nitrogen, ammonia, total phosphorus, electrical conductivity, pH, suspended solids and turbidity, which were considered important due to the agricultural management adopted in the region. Results indicated a contamination of agricultural origin along the basin. Factorial analysis showed that ammonia, ammoniacal nitrogen and nitrate parameters were the ones that most contributed in determining the WQI.

2019 ◽  
Vol 14 (1) ◽  
pp. 37-48
Author(s):  
Ajay Kumar Singh ◽  
Satish Kumar Bhardwaj

Today, the quality of drinking water across the globe has become an environmental concern because of its degradation due to urbanization, industrialization, transportation etc. Solan, a rapidly developing district and an industrial hub, in the recent past has faced water borne diarrhoeal disease outbreaks. Therefore, the study was undertaken to assess the water quality of disease burden regions during monsoon and post monsoon seasons. pH of the water sources was in the range of 6.92- 7.43 and was well within normal limits. Electrical conductivity of water ranged from 151.40- 414.65 µS/cm. The water sources of high disease burden regions exhibited higher EC than the prescribed ICMR standards. DO (range 7.43- 8.56 mg/l) was normal in all disease burden regions. BOD (range 12.25- 23.25 mg/l) was higher than the BIS limits in all regions. The COD, TDS and turbidity (range 75.75- 157.50 mg/l, 2.24- 81.01 mg/l and 1.85- 5.05 NTU respectively) were within BIS limits. The concentrations (mg/l) of Ca, Pb, Hg, Zn and Cr was found in the ranges of 37.2- 122.9, 0.17- 0.51, 0.00- 0.03, 0.74- 8.99 and 0.04- 0.10, respectively. The high disease burden regions exhibited relatively higher contents of Ca, Hg and Cr as compared to lower one and the BIS limits. However, contents of Pb and Zn were above BIS limits in all the regions. The concentration (mg/l) of Mg, NO3-, Cl- and As was in the ranges of 14.25- 30.61, 5.10- 9.88, 16.42- 74.96 , 0.001- 0.014 respectively, which were below prescribed standards. Cd was detected (0.001 mg/l) in Solan region only, however it was within BIS limits. Water Quality Index (WQI) computed by using nine parameters varied from 78.58- 219.78 (very poor to unsafe drinking water class). Interestingly, water sources of all the high disease burden regions were unsafe for drinking (WQI: 102.02- 167.04). Water quality deteriorated more in the monsoons. The study therefore warrants remedial actions of water resource protection and conservation for provision of potable water.


2017 ◽  
Vol 2 (1) ◽  
pp. 18
Author(s):  
Guntar Marolop S ◽  
Sutrisno Sutrisno

The Lake is an ecosystem of wetlands to note preserved. However, since the Lake is an open system that can also be utilized for the certain provisions tailored to support power and capacity of the Lake. One of the supported power and capacity of the Lake is the availability and quality of the water of the Lake. Sipin lakes located in the city of Jambi, have long been exploited by various parties, just that its utilization is not maximal for a variety of activities. To maximize its utility it is necessary to know the power support and power tampungnya. By knowing the power support and power tampungnya then it can be determined the allocation it is used so that will give you maximum results. One of the variables that need to be taken care of in order to use Sipin Lake against correspond to peruntukkannya is about the availability and quality of water. Study on quantity and quality of water of the Lake can be done by way of Sipin analyzed the data using the method of precipitation F.J. Mock. Water quality studies done by using water quality Index method of electronically Stored. F.J. method using Mock data to analyze rainfall from year 2005 until 2015, obtained that debit maximum inlet reach 4,870 m3/sec and the minimum discharge of 2,090 m3/sec.Method Stored i.e. testing kualiats Sipin lake water from year 2014 2016 disimpulkkan s/d that the water quality of Lake Sipin only in accordance with the requirements of the water quality of the IV. From fluctuations in discharge and water quality of the IV, then Lake peruntukaan Sipin can only be utilized to provide water gardening or urban businesses or other businesses that comply with the requirements of the water quality of the IV.Keywords: Lake, water quantity, water quality, allocation, and utilization.


2020 ◽  
Vol 4 (6) ◽  
pp. 299-302
Author(s):  
Lilia Zaoui

Water quality is an important standard in matching water require and contribute. Abundant degree of freshwater is prominent for biological requirements and is a vital surface of incorporated environmental managing and sustainable development. The quality of water indices evaluation enterprise particular value which reduce the immense quantity of parameters and simply characterize data. The aim objective of the present study is to assess the suitability of surface water of Bounamoussa River situated in El-Tarf city located in the Algerian's extreme northeast, for drinking purpose based on calculated water quality index standards. Per methodology, WQI is a significant parameter to check the quality of water, and its calculation was carried out by using relations given in the water quality index computation which twelve selected parameters (pH, EC,TH, Ca, Mg, Na, K, Cl, NH4, SO4, NO2, NO3) have been considered, which were measured at nine stations along the river during two sampling campaigns (winter and summer seasons). The results showed that the computed WQI values of Bounamoussa River surface water extend from 32,80 to 65,77 with an average 46,76 in winter and fluctuate from 35,86 to 97,46 with an average of 47,25 in summer, in general, the study region in both seasons is under excellent to good category. Water from almost all the sampled sites can be careful as suitable for drinking purposes. It’s recommended to continue monitoring the water of this ecosystem to facilitate the establishment at all levels to supervise and defend the natural resources of the region.


2017 ◽  
Vol 68 (8) ◽  
pp. 1732-1739 ◽  
Author(s):  
Iuliana Paun ◽  
Florentina Laura Chiriac ◽  
Nicoleta Mirela Marin ◽  
Liliana Valeria Cruceru ◽  
Luoana Florentina Pascu ◽  
...  

The Danube River is the major source of drinking water supply for the cities in the southern part of Romania. The study was a descriptive-analytical one and lasted for 9 month. Samples were taken monthly between March 2016 and November 2016. Six sampling sites were selected to evaluate the spatial and temporal changes of water quality along the river. The samples were analyzed based on the standard methods for the following parameters: pH, conductivity (EC), NH4+, NO3-, Cl -, suspended solids, PO43-, SO42-, metals (Fe, Cd, Cr, Pb, Ni, Hg, As, Zn, Cu, Mn). The obtained values were compared with those imposed by the Romanian environmental legislation. An efficient and simplified method to express the quality of water used for consumption is provided by the Water Quality Index (WQI). WQI reflects the quality of water in a single value by comparing data obtained from the investigation of a number of physico-chemical parameters to the existing limits. The evaluation of water quality was performed using the Water Quality Index of the Canadian Council of Ministries of the Environment (CCME WQI). Water quality indices were classified as: excellent, good, medium, bad and very bad. The results indicated the water quality classification as �good� in all six sampling selected sites.


2020 ◽  
Vol 17 (4) ◽  
pp. 59-72
Author(s):  
Rabiranjan Prusty ◽  
Trinath Biswal

The modelling of water quality is an integrated source of good management, which benefits the environment and its people. In the present study, the quality of water was measured in terms of physicochemical analysis and WQI. This analysis facilitates the eco-management study of the water. In this article, we have measured the quality of the water in Taladanda canal and river Mahanadi nearby Paradip area in terms of WQI for the year 2017. Five different sampling stations were selected from Taladanda canal and nine sampling points were selected from river Mahanadi. It was found that the water quality index in most of the areas was much higher, however, the water is of poor quality. But in PPL site areas, the quality of water was found to be very poor and not suitable for human use. The pollution load was found to be much higher in the Taladanda canal and moderate in Mahanadi River near the Paradip area.


2020 ◽  
Vol 10 (5) ◽  
pp. 94-104
Author(s):  
J. Safieh ◽  
D. Rebwar ◽  
M.H. Hamed

Background: Providing fresh water suitable for drinking and farming and living organisms in the ecosystem is essential. To evaluate water quality, qualitative indicators are often employed for managing water resources and water quality protection and pollution abatement. Aim: This study evaluated the quality of Borkhar basin water resources using three different water quality indices, including National Institutes of Health Water Quality Index (NIHWQI) having nine parameters, the Oregon Water Quality Index (OWQI) having eight parameters, and the Canadian Water Quality Indices (CWQI) with 22 main parameters. Material and methods: Using data for a period of 30 years, NIHWQI, OWQI and CWQI were used. To analyze water quality of the entire basin for current and future time. New findings: Results showed that water quality of the basin was in a very moderate range according to NSFWQI, and was in a very bad range accordingly to OWQI. Water quality forecasts showed that future water quality would be bad, based on OWQI and moderate based on NSFWQI, whereas based on CWQI, it will be good for drinking, and bad for aquatic animals, recreation, irrigation, and livestock use.


2017 ◽  
Vol 4 (4) ◽  
pp. 475-482 ◽  
Author(s):  
H. R. Bharathi ◽  
S. Manjappa ◽  
T. Suresh ◽  
B. Suresh

Present communication deals with a study of Physico-chemical parameters such as pH, Temperature, Total Suspended Solids, Turbidity, Dissolved Oxygen, Biochemical Oxygen Demand, Nitrate and Phosphate in water samples of Channarayapatna, Janivara, Anekere and Baghur water bodies in Channarayapatna taluka, Karnataka state of India. The water quality of the samples was compared with standard values given by World Health Organization (WHO) and United State Salinity Laboratory for drinking and irrigation purposes. Water Quality Index (WQI) was also calculated to know the overall quality of water samples. Water quality index (WQI) of Surface water body of various Sampling locations of Channarayapatna taluka, Karnataka ranged between 61.82 and 68.27 indicates the fair quality of water. The water quality index is calculated by indicator (100-point scale) shows that water is suitable for drinking purposes only after pretreatment like filtering, boiling, reverse osmosis and electro dialysis. WQI can play a big role in justifying the water pollution problems after encountered in different surface water bodies. Application of Water Quality Index (WQI) in this study has been found useful in assessing the overall quality of water and to get rid of judgment on quality of the surface water.Int J Appl Sci Biotechnol, Vol 4(4): 475-482


2021 ◽  
Vol 325 ◽  
pp. 08002
Author(s):  
Hilda Guadalupe Cisneros Ontiveros ◽  
Nahum Andres Medellín Castillo ◽  
Abraham Cárdenas Tristán ◽  
Marisol Castro Cárdenas ◽  
César Arturo Ilizaliturri Hernández ◽  
...  

The water quality of water bodies in Huasteca Potosina was assessed by the National Sanitation Foundation Water Quality Index (NFS WQI) depending on nine water quality parameters include physical, chemical, and biological properties. The water quality obtained at the sampling site 50-90 in the NSF-WQI range shows the medium quality. Results revealed that the Moctezuma River in Tanquian de Escobedo has low water quality with a score of 50, the Tancuilin and Axtla Rivers have good water quality, and the Moctezuma River (Tampamolón Corona), Amajac River, Valles River, Panuco River, Patitos Lagoon, Plan de Iguala Lagoon were all located in medium water quality. This indicates that the water quality of the Huasteca Potosina is irregular, due to the presence of contaminating agents coming from fertilizers, pesticides, domestic water, and residual water from the communities adjacent to the rivers and lagoons, causing an environmental impact to the aquatic ecosystems of the place. However, this research shows the importance of making use of the water quality index in this region, this to relate the environmental impacts responsible for the contamination of surface water and interpret the experimental data of this water quality monitoring to facilitate decision making and consider frequent monitoring of the quality of water bodies in the Huasteca Potosina.


2017 ◽  
pp. 390-399
Author(s):  
Jigna Desai Desai ◽  
S.K. Tank

Water quality monitoring is an important aspect of water management concerning to the pollution control. Present communication deals with study of physico-chemical parameters such as pH, temperature , total dissolved solids (TDS),total suspended solids (TSS), total alkalinity (TA), , total hardness (TH), chloride (Cl), fluoride (F), sodium (Na), calcium (Ca), magnesium (Mg), sulphate (SO4), nitrate(NO3), nitrite (NO2), dissolved oxygen (DO), biochemical oxygen demand (BOD), chemical oxygen demand (COD) and heavy metals like chromium (Cr), arsenic (As), lead (Pb) and cadmium (Cd) of water samples from five sampling sites of River Tapti, Surat, Gujarat state, India. The water samples were collected at regular interval of 30 days for two consecutive years 2008-2009. The experimental values of water samples were compared with standard values given by World Health Organization (WHO). Water Quality Index (WQI) was also calculated to know the overall quality of water samples by using Water Rating System adapted by Canadian Council for Minister of the Environment (CCME-WQI). The data were analyzed statistically to identify those parameters which are responsible for variation in Water Quality Index (WQI). To identify those parameters we have done correlation analysis, testing of hypothesis, factor analysis and regression Analysis by using SPSS (Statistical Package for Social Science). The results show that the quality of water is poor and not good for drinking or irrigation purpose. The variance was found significant at 1% level of significance in case of and turbidity, BOD, Cr and Pb. It was found significant at 5% level in case of COD.


Author(s):  
Jennifer Ortiz-Letechipia ◽  
Julián González-Trinidad ◽  
Hugo Enrique Júnez-Ferreira ◽  
Carlos Bautista-Capetillo ◽  
Sandra Dávila-Hernández

The supply of drinking water to the population is an important challenge facing humanity, since both surface and underground sources present a great variability of water storage with respect to space and time. This problem is further aggravated in arid and semi-arid areas where rainfall is low and torrential, which makes groundwater the main source of supply; therefore, it is necessary to carry out studies that allow evaluating the evolution of the quantity and quality of water. This study addresses the behavior of groundwater in a semi-arid region, considering the theory of flow systems to identify movement as well as water quality, es determined by a water quality index (WQI), calculated considering arsenic and fluorine. In addition, a quality irrigation classification is used, employing the norms in accordance with international standards and the Mexican Norm, which allows for a comparison. Local, regional, intermediate and mixed flow systems are identified, and the evolution of cations and anions in addition to temperature is examined. It is observed that the drinking water quality index classifies them as excellent in most of the monitored wells (<50), but with a negative evolution. Regarding irrigation, most of the water samples are classified without restriction for the establishment of any type II crop (C2S1) and with restrictions for horticultural crops. It is observed that arsenic had values between 0.49 and 61.40 (µg/L) in 2005, while in 2015 they were between 0.10 and 241.30 (µg/L). In addition, fluoride presented values between 0.00 and 2.6 (mg/L) in 2005, while in 2015 they were between 0.28 and 5.40 (mg/L). The correlations between arsenic and fluorine are noted as well as WQI and SAR. A finding in this research was to include arsenic and fluorine in the calculation of the WQI allowing a better interpretation of the quality of water for both human consumption and for agricultural use to based on this make the best decision to control any harmful effects for the population, in addition to identifying the appropriate purification treatment required to control pollutants. It is concluded that arsenic is an element of utmost importance when considering water quality, so it is necessary to examine its evolution and continue to monitor its levels constantly.


Sign in / Sign up

Export Citation Format

Share Document