Potential of Air-Propelled Abrasives for Selective Weed Control

2009 ◽  
Vol 23 (2) ◽  
pp. 317-320 ◽  
Author(s):  
Frank Forcella
Keyword(s):  
Weed Control ◽  
Agricultural Residues ◽  
Soil Tillage ◽  
Common Lambsquarters ◽  
Corn Cobs ◽  
Weed Plants ◽  
Corn Plants ◽  
Nonchemical Weed Control

Novel forms of selective weed control are needed by many types of growers, but especially by organic growers who are restricted from using synthetic herbicides. Abrasive grit made from corn cobs was expelled from a sand blaster at 517 kPa pressure and aimed at plants of common lambsquarters and corn positioned 300 mm distant. Most small weed plants were killed by one split-second blast of grit, but corn plants suffered little damage by the same treatment. Air-propelled grit made from agricultural residues possibly could be used for selective nonchemical weed control without the need for soil tillage.

Broadleaf weed control with abrasive grit during raspberry establishment

2020 ◽  
Vol 34 (6) ◽  
pp. 830-833
Author(s):  
Frank Forcella ◽  
Steven Poppe ◽  
Emily Tepe ◽  
Emily Hoover
Keyword(s):  
Weed Control ◽  
Additional Research ◽  
Air Pressure ◽  
New Method ◽  
Soil Tillage ◽  
Red Raspberry ◽  
Corn Cobs ◽  
Horticultural Crops ◽  
Hand Weeding ◽  
Weed Emergence

AbstractGrowers desire more techniques to control weeds in horticultural crops that are grown organically and consumed directly, such as red raspberry. Abrasive grit emited via high air pressure is a new method for controlling weeds. Grit derived from corn cobs was examined for its efficacy during the year of raspberry establishment for 2 to 3 years at three sites (seven site-years) and compared with efficacy of hand-weeding as well as no weed control. Grit was applied once or twice weekly after raspberry transplantation in spring until weed emergence ceased in mid to late July. Weeds and raspberry growth were assessed in August. Grit was effective in controlling broadleaf weeds, averaging 94% control across site-years, but control of grass weeds was less than 10%. Total weed (broadleaf plus grass) control across site-years ranged from 51% to 96% and averaged 78%. Raspberry cane growth was affected by weeds, and grit-weeding at least partially alleviated these effects. Thus, abrasive grit allows growers to manage broadleaf weeds effectively without herbicides or soil tillage. However, additional research is needed to determine the correct amounts and timing of grit applications, as well as more efficacious types of grit, to control grass weeds.

Effects of Soil Tillage and Post-Emergence Weed Control on Weed Biomass and Maize Yield

2003 ◽  
Vol 31 (1-2) ◽  
pp. 177-184
Author(s):  
Mira Knežević ◽  
Marija Đurkić ◽  
Ivan Knežević ◽  
Oleg Antonić ◽  
Sven Jelaska
Keyword(s):  
Weed Control ◽  
Maize Yield ◽  
Soil Tillage ◽  
Weed Biomass

Weed control in soybean (Glycine max) with imazamox and imazethapyr

Weed Science ◽  
1998 ◽  
Vol 46 (5) ◽  
pp. 587-594 ◽  
Author(s):  
Kelly A. Nelson ◽  
Karen A. Renner ◽  
Donald Penner
Keyword(s):  
Nonionic Surfactant ◽  
Weed Control ◽  
Seed Oil ◽  
Diphenyl Ether ◽  
Soybean Seed ◽  
Dry Weight ◽  
Common Ragweed ◽  
Common Lambsquarters ◽  
Giant Foxtail ◽  
Urea Ammonium Nitrate

Field and greenhouse experiments were conducted in 1995 and 1996 to determine soybean injury and weed control differences from imazamox and imazethapyr applied postemergence with a nonionic surfactant or methylated seed oil and with selected tank mixtures. Soybean injury from imazamox at 35 g ai ha−1plus either a methylated seed oil or nonionic surfactant was equal to injury from imazethapyr at 70 g ai ha−1in the greenhouse and field. Imazamox provided greater common lambsquarters control than imazethapyr in the field in 1995 and in the greenhouse. Thifensulfuron tank mixed with imazethapyr increased common lambsquarters control, while soybean response increased when thifensulfuron was tank mixed with imazamox. Common ragweed dry weight was reduced 61 to 64% from 35 g ha−1imazamox and 70 g ha−1imazethapyr in the field; however, imazamox provided greater common ragweed control than imazethapyr in the greenhouse. Tank mixtures of lactofen with imazamox or imazethapyr increased common ragweed control and resulted in greater soybean seed yield in 1996 than when imazamox and imazethapyr were applied alone; however, lactofen antagonized giant foxtail control with imazamox and imazethapyr, and antagonized common lambsquarters control with imazamox. Giant foxtail control in the greenhouse was antagonized more when acifluorfen, fomesafen, and lactofen were tank mixed with 35 g ha−1imazethapyr than with 35 g ha−1imazamox. Giant foxtail control with imazamox or imazethapyr applied alone or with diphenyl ether herbicides increased when 28% urea ammonium nitrate was added with nonionic surfactant compared with nonionic surfactant only. Imazethapyr antagonized giant foxtail control by clethodim in the field and was more antagonistic than imazamox in the greenhouse. A methylated seed oil improved common ragweed control by imazethapyr at 70 g ha−1and imazamox at 18 and 35 g ha−1, while common lambsquarters and velvetleaf control increased when a methylated seed oil was included with 18 g ha−1imazethapyr compared to nonionic surfactant in the greenhouse.

Evaluation of Imazethapyr for Weed Control in Leafy Vegetable Crops

1996 ◽  
Vol 10 (2) ◽  
pp. 253-257 ◽  
Author(s):  
Joan A. Dusky ◽  
William M. Stall
Keyword(s):  
Regression Analysis ◽  
Weed Control ◽  
Crop Yield ◽  
Relative Sensitivity ◽  
Leafy Vegetable ◽  
Field Conditions ◽  
Vegetable Crops ◽  
Weed Species ◽  
Common Lambsquarters ◽  
Common Purslane

Imazethapyr was evaluated PRE and POST in five lettuce types and chicory under Florida field conditions. The relative sensitivity of leafy crop vigor (most sensitive to most tolerant) to imazethapyr PRE, based on 20% inhibition determined using regression analysis, was as follows: Boston > bibb > crisphead > romaine > leaf > escarole > endive. Leafy crop injury increased as the rate of imazethapyr applied POST increased, with all leafy crops responding in a similar manner. Surfactant addition increased imazethapyr phytotoxicity. Imazethapyr PRE treatments at 0.067 kg ai/ha provided greater than 80% control of livid amaranth, common purslane, flatsedge, and common lambsquarters. Imazethapyr POST at 0.067 kg/ha, with surfactant provided control greater than 85% of all weed species. Greater than 85% spiny amaranth control was provided by imazethapyr POST at 0.017 kg/ha. Use of surfactant with imazethapyr did not improve spiny amaranth control over imazethapyr with no surfactant. POST treatments did not decrease leafy crop yield compared with the hand-weeded check. Imazethapyr applied PRE reduced crop yield compared to the POST treatments and the hand-weeded control.

Application Timing for Weed Control in Corn (Zea mays) with Dicamba Tank Mixtures

1997 ◽  
Vol 11 (3) ◽  
pp. 602-607 ◽  
Author(s):  
Eric Spandl ◽  
Thomas L. Rabaey ◽  
James J. Kells ◽  
R. Gordon Harvey
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Weed Control ◽  
Field Studies ◽  
Corn Yield ◽  
Application Timing ◽  
Common Lambsquarters ◽  
Giant Foxtail ◽  
Corn Grain ◽  
Corn Grain Yield

Optimal application timing for dicamba–acetamide tank mixes was examined in field studies conducted in Michigan and Wisconsin from 1993 to 1995. Dicamba was tank mixed with alachlor, metolachlor, or SAN 582H and applied at planting, 7 d after planting, and 14 d after planting. Additional dicamba plus alachlor tank mixes applied at all three timings were followed by nicosulfuron postemergence to determine the effects of noncontrolled grass weeds on corn yield. Delaying application of dicamba–acetamide tank mixes until 14 d after planting often resulted in lower and less consistent giant foxtail control compared with applications at planting or 7 d after planting. Corn grain yield was reduced at one site where giant foxtail control was lower when application was delayed until 14 d after planting. Common lambsquarters control was excellent with 7 or 14 d after planting applications. At one site, common lambsquarters control and corn yield was reduced by application at planting. Dicamba–alachlor tank mixes applied 7 d after planting provided similar weed control or corn yield, while at planting and 14 d after planting applications provided less consistent weed control or corn yield than a sequential alachlor plus dicamba treatment or an atrazine-based program.

Annual weed management in isoxaflutole-resistant soybean using a two-pass weed control strategy

2019 ◽  
Vol 33 (03) ◽  
pp. 411-425
Author(s):  
Andrea Smith ◽  
Nader Soltani ◽  
Allan J. Kaastra ◽  
David C. Hooker ◽  
Darren E. Robinson ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Field Experiments ◽  
High Rate ◽  
Grass Species ◽  
Annual Grass ◽  
Common Lambsquarters ◽  
Control Programs ◽  
The One ◽  
Herbicide Programs

AbstractTransgenic crops are being developed with herbicide resistance traits to expand innovative weed management solutions for crop producers. Soybean with traits that confer resistance to the hydroxyphenylpyruvate dioxygenase herbicide isoxaflutole is under development and will provide a novel herbicide mode of action for weed management in soybean. Ten field experiments were conducted over 2 years (2017 and 2018) on five soil textures with isoxaflutole-resistant soybean to evaluate annual weed control using one- and two-pass herbicide programs. The one-pass weed control programs included isoxaflutole plus metribuzin, applied PRE, at a low rate (52.5 + 210 g ai ha−1), medium rate (79 + 316 g ai ha−1), and high rate (105 + 420 g ai ha−1); and glyphosate applied early postemergence (EPOST) or late postemergence (LPOST). The two-pass weed control programs included isoxaflutole plus metribuzin, applied PRE, followed by glyphosate applied LPOST, and glyphosate applied EPOST followed by LPOST. At 4 weeks after the LPOST application, control of common lambsquarters, pigweed species, common ragweed, and velvetleaf was variable at 25% to 69%, 49% to 86%, and 71% to 95% at the low, medium, and high rates of isoxaflutole plus metribuzin, respectively. Isoxaflutole plus metribuzin at the low, medium, and high rates controlled grass species evaluated (i.e., barnyardgrass, foxtail, crabgrass, and witchgrass) 85% to 97%, 75% to 99%, and 86% to 100%, respectively. All two-pass weed management programs provided 98% to 100% control of all species. Weed control improved as the rate of isoxaflutole plus metribuzin increased. Two-pass programs provided excellent, full-season annual grass and broadleaf weed control in isoxaflutole-resistant soybean.

Evaluating the EPA's Comparative Product Performance Testing Guidelines for Herbicides in Snap Bean (Phaseolus vulgaris)

1998 ◽  
Vol 12 (2) ◽  
pp. 215-222
Author(s):  
Robin R. Bellinder ◽  
Marija Arsenovic ◽  
Jonathan J. Kirkwyland ◽  
Russell W. Wallace
Keyword(s):  
Weed Control ◽  
Environmental Protection Agency ◽  
Performance Testing ◽  
Good Control ◽  
Field Trials ◽  
Weed Species ◽  
Snap Bean ◽  
Common Lambsquarters ◽  
Redroot Pigweed ◽  
Product Comparison

Following suggested guidelines developed by the Environmental Protection Agency (EPA), comparative snap bean herbicide performance field trials were conducted from 1993 to 1995 in New York. Data were obtained on crop injury, weed control, and weed biomass, and crop yield, quality, and losses during harvest. Trifluralin, EPTC, and pendimethalin applied preplant incorporated (PPI) and applications of metolachlor applied preemergence (PRE) provided less than adequate control of redroot pigweed, common lambsquarters, and hairy galinsoga. Cultivation improved weed control with PPI and PRE applications. Metolachlor + fomesafen PRE provided good control of hairy galinsoga, adequate redroot pigweed control, and marginal control of common lambsquarters. Fomesafen applied postemergence (POST), combinations of metolachlor applied PRE with fomesafen or bentazon applied POST, and fomesafen + bentazon applied POST adequately controlled the three weed species without cultivation. Herbicide treatments had little measurable impact on snap bean quality or losses during harvest. Information from product comparison trials may be useful in developing recommendations for growers but may prove less than adequate in providing data necessary for a thorough evaluation of the relative benefits of individual herbicides as intended by EPA guidelines. Difficulties were encountered in following the guidelines, and costs of conducting the product comparison trials for a single crop in one growing region exceeded $90,000 over 3 yr.

Preplant Weed Control in a Ridge-Till Soybean (Glycine max) and Grain Sorghum (Sorghum bicolor) Rotation

1989 ◽  
Vol 3 (4) ◽  
pp. 621-626 ◽  
Author(s):  
David L. Regehr ◽  
Keith A. Janssen
Keyword(s):  
Glycine Max ◽  
Sorghum Bicolor ◽  
Weed Control ◽  
Grain Sorghum ◽  
Planting Time ◽  
Common Lambsquarters ◽  
Weed Growth ◽  
Herbicide Treatments ◽  
Dry Down ◽  
Sorghum Grain

Research in Kansas from 1983 to 1986 evaluated early preplant (30 to 45 days) and late preplant (10 to 14 days) herbicide treatments for weed control before ridge-till planting in a soybean and sorghum rotation. Control of fall panicum and common lambsquarters at planting time averaged at least 95% for all early preplant and 92% for late preplant treatments. Where no preplant treatment was used, heavy weed growth in spring delayed soil dry-down, which resulted in poor ridge-till planting conditions and reduced plant stands, and ultimately reduced sorghum grain yields by 24% and soybean yields by 12%. Horsenettle population declined significantly, and honeyvine milkweed population increased. Smooth groundcherry populations fluctuated from year to year with no overall change.

Sign in / Sign up

Export Citation Format

Share Document