ATOMIZATION AND EMISSION GAS CHARACTERISTICS OF RESIDUAL OILS/WATER MIXTURES IN A SMALL FURNACE WITH A TWIN-FLUID ATOMIZER

2004 ◽  
Vol 14 (1) ◽  
pp. 1-14 ◽  
Author(s):  
Kyoji Kimoto ◽  
Kunihiko Namba
Keyword(s):  

The experiments, which form the subject of the present communication were undertaken, not only on account of the difference between the estimates that have been made of the quantity of carbon in carbonic acid, but because those of Guyton de Morveau, which are most frequently preferred at this time in various systems of chemistry, appeared liable to many objections, from the manner in which they were conducted; while the original experiments of Lavoisier, on the contrary, appear to have been performed with much accuracy, and had moreover been confirmed by Mr. Tennant in his researches on the nature of the diamond. The design of the authoi’s was to consume certain known quantities of diamond and of other carbonaceous substances in oxygen gas; for which purpose it had been originally their intention to employ he sun’s rays, by means of a powerful lens; but, considering the uncertainty of a favourable opportunity in this country, they resolved to employ an apparatus consisting of two mercurial gas-holders, with a tube of platina interposed between them in a horizontal position, and passing through a small furnace, by which the tube and its contents might be heated to any degree requisite for the combustion of the substance employed.


1995 ◽  
Vol 52 (1-2) ◽  
pp. 45-46
Author(s):  
L. I. Voronina ◽  
A. A. Kalashnikov

1998 ◽  
Vol 21 (1) ◽  
pp. 53-60
Author(s):  
R J Strachan ◽  
J E Hamilton ◽  
I Armit ◽  
I B M Ralston

Summary Excavations were carried out on two sites containing traces of iron ore processing, as part of the N-W Ethylene Pipeline Project, funded by Shell Chemicals UK Ltd. The excavations at Scabgill revealed a small part of an iron ore processing site apparently dating to the later medieval period or earlier. At nearby Boghall, a small furnace was excavated, which, while not itself datable, was also used in the processing of low grade, bog iron ores.


2016 ◽  
Vol 42 (6) ◽  
pp. 294-302
Author(s):  
Daisuke KAMIKAWA ◽  
Toshiro HARADA ◽  
Tatsuo INADA ◽  
Yoh KURATOMI ◽  
Masao SHIOZAKI ◽  
...  
Keyword(s):  

2007 ◽  
Vol 63 (5) ◽  
pp. 683-692 ◽  
Author(s):  
Ryoko Makita ◽  
Kiyoaki Tanaka ◽  
Yoshichika Ōnuki ◽  
Hiroshi Tatewaki

The 4f states of Ce in a typical Kondo crystal, CeB6, are split into an excited state Γ7 and the ground state Γ8, with an excitation energy at 560 K. The electron-density distribution of the thermally excited state was measured at 430 K using a four-circle diffractometer equipped with a small furnace. In contrast to the previous results at lower temperature, electrons are transferred from B6 to Ce at 430 K. X-ray atomic-orbital analysis revealed that the 5d-Γ8 orbitals (the energy level of which is similar to that of the B-2p orbitals) are fully occupied and the 4f-Γ7 orbitals are more populated than the 4f-Γ8 orbitals. Fully occupied 5d-Γ8 makes the 4f-Γ8 states unstable and the energy levels of 4f-Γ7 and 4f-Γ8 are inverted.


1993 ◽  
Vol 13 (Supplement2) ◽  
pp. 61-66
Author(s):  
Kazuhiro MURAI ◽  
Yousuke KAWASHIMA ◽  
Shigeyasu NAKANISHI ◽  
Kazumasa USUDA ◽  
Hironaga INOUE ◽  
...  

1981 ◽  
Vol 103 (4) ◽  
pp. 370-374
Author(s):  
R. S. Baheti ◽  
R. R. Mohler

A dynamic model is developed to control the temperature of a specimen in a laboratory furnace. The control variables are the power input to the furnace and the rate of airflow inside the chamber. For a constant airflow input, the furnace can be represented by a linear model and a static gain dependent on the sample temperature. The power input to the furnace is perturbed with a pseudorandom binary sequence and the model parameters are estimated from the input-output measurements. The controller parameters are selected to minimize the variance in the sample temperature.


Author(s):  
Mohammad O. Hamdan ◽  
Mohamed Y. E. Selim ◽  
S.-A. B. Al Omari ◽  
Emad Elnajjar ◽  
Mamdouh Ghannam

This study presents an experimental investigation of emulsified fuels with water content of 10%, 20% and 30% by volume, using a small furnace under steady combustion conditions. Pure diesel is used as a baseline in the conducted external combustion for comparison purposes. The study found that water content in the emulsion has strong impact on the flame temperature, the flame heat release and the combustion efficiency. The 20% water-diesel emulsion showed a lower flame temperature and higher combustion efficiency. Using the proper water-diesel emulsion, 20%, the heat release rate of the emulsified fuels is comparable to the one obtained in the pure diesel case. The highest flame temperature and heat flux transfer to water jacket is achieved at pure diesel (0% water content). The optimum water content in diesel emulsion strongly depends on the liquid fuel nozzle design.


Sign in / Sign up

Export Citation Format

Share Document