scholarly journals Influence of Fibers and Curing Conditions on the Pore Morphology in Plain and Fiber-Reinforced High-Performance Concrete through the Use of Computed Tomography Scan Technology

2020 ◽  
Vol 10 (12) ◽  
pp. 4286
Author(s):  
Dorys C. González ◽  
Mohammad Rahman ◽  
Jesús Mínguez ◽  
Miguel A. Vicente ◽  
Riyadh Hindi
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Pore Morphology ◽  
Micro Ct ◽  
Fiber Reinforced ◽  
Ct Scanner ◽  
Curing Conditions ◽  
Concrete Mixtures ◽  
The One ◽  
Tomography Scan

This paper analyzes the pore morphology of two different concrete mixtures (plain and fiber-reinforced) under two different curing conditions, through the use of a CT scanner and post-processing software. Twelve cylinders of 45.2 mm in diameter and 50 mm in height were cast. Half of the specimens were kept in a humidity-controlled room, at 20 °C and 60% humidity, and the rest in a curing room, at 20 °C and 100% humidity. All the specimens were scanned at the age of 28 days, using a micro CT scanner. The results reveal that the presence of fibers substantially modifies the pore morphology in the way of increasing the volume of voids and the pore-size, reducing the shape factor of the voids and reorienting the voids toward a direction more aligned to the one showed by the fibers. In general, the curing conditions do no exhibit a great impact on the results.

scholarly journals Effect of different curing conditions on the mechanical properties of reactive powder concrete

2018 ◽  
Vol 162 ◽  
pp. 02014
Author(s):  
Mazin Abdulrahman ◽  
Alyaa Al-Attar ◽  
Marwa Ahmad
Keyword(s):  
Mechanical Properties ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Material Constant ◽  
Hot Water ◽  
Modulus Of Rupture ◽  
Reactive Powder Concrete ◽  
Curing Conditions ◽  
Reactive Powder

Reactive Powder Concrete (RPC) is an ultra-high performance concrete which has superior mechanical and physical properties, and composed of cement and very fine powders such as quartz sand and silica fume with very low water/ binder ratio and Superplasticizer. Heat treatment is a well-known method that can further improve the performance of (RPC). The current research including an experimental study of the effect of different curing conditions on mechanical properties of reactive powder concrete (compressive strength, modulus of rupture and splitting tensile strength), the curing conditions includes three type of curing; immersion in water at temperature of 35 OC (which is considered as the reference-curing situation), immersion in water at temperature of 90 OC for 5 hours daily and curing with hot steam for 5 hours daily) until 28 days according to ASTM C684-99 [8]. This research includes also the study of effect of adding silica fume as percentage of cement weight on mechanical properties of reactive powder concrete for different percentage ratios (5%,10% and 15%). Super plasticizer is also used with ratio of (1.8%) by weight of cementitious material; constant water cement ratio (0.24) was used for all mixes. For each reactive concrete mix, it has been cast into a cubes of (150*150*150) (to conduct the compression test), a cylinders of 150mm diameter with 300mm height (to conduct split test) and prisms of (500*100*100)mm to conduct the modulus of rupture test. The results showed that the best method of curing (according to its enhancing the RPC mechanical properties) is the method of immersion in hot water at temperature 90 OC for the all silica fume percentages, and the best used silica fume percentage was (10%) for the all used curing methods.

Factorial Design Approach of Ultra-High Performance Concrete

2013 ◽  
Vol 405-408 ◽  
pp. 2847-2850
Author(s):  
Wu Jian Long ◽  
Wei Lun Wang ◽  
Qi Ling Luo ◽  
Bi Qin Dong
Keyword(s):  
Mechanical Properties ◽  
Factorial Design ◽  
Statistical Models ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Design Approach ◽  
Ultra High Performance Concrete ◽  
Self Consolidating Concrete ◽  
Slump Flow

In order to understand the influence of mixture parameters on ultra-high strength self-consolidating concrete (UHS-SCC) behaviour, an experimental design was carried out in this investigation. In total, 19 SCC mixtures were prepared to determine several key responses that affect the slump flow and compressive strength of UHS-SCC. The statistical models derived from the factorial design approach can be used to quantify the effect of mixture parameters and their coupled effects on fresh and mechanical properties of SCC.

Shear resistance of self-consolidating concrete beams — experimental investigations

2005 ◽  
Vol 32 (6) ◽  
pp. 1103-1113 ◽  
Author(s):  
M Lachemi ◽  
K M.A Hossain ◽  
V Lambros
Keyword(s):  
High Performance ◽  
Failure Modes ◽  
Coarse Aggregate ◽  
High Performance Concrete ◽  
Maximum Size ◽  
Shear Resistance ◽  
Resistance Mechanisms ◽  
Experimental Investigations ◽  
Self Consolidating Concrete ◽  
Aggregate Interlock

Self-consolidating concrete (SCC) is a new generation of high performance concrete known for its excellent deformability and high resistance to segregation and bleeding. Lack of information regarding in situ properties and structural performance of SCC is one of the main barriers to its acceptance in the construction industry. There is some concern among researchers and designers that SCC may not be strong enough in shear because of some uncertainties in mechanisms resisting shear — notably the aggregate interlock mechanism. Because of the presence of comparatively smaller amount of coarse aggregates in SCC, the fracture planes are relatively smooth as compared with normal concrete (NC) that may reduce the shear resistance of concrete by reducing the aggregate interlock between the fracture surfaces. The paper compares the shear resistance of SCC and NC based on the results of an experimental investigation on 18 flexurally reinforced beams without shear reinforcements. The test parameters include concrete type, maximum size of coarse aggregate, coarse aggregate content, and beam shear span-to-depth ratio. Shear strength, shear ductility, crack patterns, and failure modes of all experimental beams are compared to analyze the shear resistance mechanisms of SCC and NC beams in both pre- and post-cracking stages. The recommendations of this paper can be of special interest to designers considering the use of SCC in structural applications.Key words: self-consolidating concrete, shear resistance, shear resistance factor, aggregate interlock, dowel action.

scholarly journals Rheological Properties Of Self-Consolidating Concrete Incorporating Natural And Industrial Pozzolans

2021 ◽  
Author(s):  
Asaad Mousa
Keyword(s):  
Rheological Properties ◽  
Yield Stress ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cost Effective ◽  
Sustainable Construction ◽  
Self Consolidating Concrete ◽  
Supplementary Cementing Materials ◽  
Passing Ability

Self-consolidation concrete (SCC) is the latest version of high performance concrete with excellent workability and high resistance to segregation and bleeding. The main objective of this project is to study the rheological properties of SCC incorporating natural and industrial pozzolans (silica fume and metakaolin, repectively) as supplementary cementing materials (SCMs). Use of such pozzolanic materials in the development of environmentally friendly and cost effective SCC can lead to sustainable construction. In this project eleven SCC mixtures are developed by incorporating different percentages of silica fume (SF) and metakaolin (MK) as replacement of cement. However, the water cement ratio of all SCC mixtures are optimized so that all mixtures satisfied the requirements of SCC in terms of fresh properties such as workability, stability, passing ability, bleeding and segregation resistance. This study particularly concentrates on evaluation of the rheological properties such as viscosity and yield stress of developed silica fume and metakaolin based SCC mixtures. The influence of SF and MK dosages on viscosity and yield stress of SCC mixtures are evaluated. Correlations among fresh and rheological properties are developed and critically reviewed to make recommendations.

Preparation Experiment and Engineering Application of High Performance Concrete of Freezing Shaft in Deep Alluvium

2014 ◽  
Vol 584-586 ◽  
pp. 1407-1411
Author(s):  
Zhi Shu Yao ◽  
Zhen Xu ◽  
Hai Qing Song
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Raw Materials ◽  
Engineering Application ◽  
High Strength ◽  
Engineering Practice ◽  
Mixture Ratio ◽  
Curing Conditions ◽  
Remarkable Effect ◽  
Shaft Lining

According to the special construction environment and curing conditions of the freezing shaft inner and outer shaft lining in deep alluvium, first,configuration principle of high strength high performance concrete of freezing shaft in deep alluvium is proposed; Then raw materials are selected according to the preparation approach, and preparation experimental study of high strength high performance concrete is conducted with C60, C65, C70and C75 , and the optimum mixture ratio is obtained, and applied to the engineering practice, achieving remarkable effect.

scholarly journals Use of condensed silica fume for making high-strength, self-consolidating concrete

2000 ◽  
Vol 27 (4) ◽  
pp. 620-627 ◽  
Author(s):  
A KH Kwan
Keyword(s):  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Self Consolidating Concrete ◽  
Concrete Mix ◽  
Binder Ratio ◽  
Condensed Silica Fume ◽  
Water Binder Ratio

A high concrete strength can be achieved by lowering the water/binder ratio and a high workability by adding a higher dosage of superplasticizer. However, a high-performance concrete with both high strength and high workability cannot be produced by just these means because lowering the water/binder ratio leads to lower workability and there is a limit to the increase in workability that can be attained by adding superplasticizer. To produce a high-strength, high-workability concrete, the concrete strength needs to be increased without lowering the water/binder ratio. This can be done by adding condensed silica fume. In this study, a series of trial mixing aimed at developing high-strength, self-consolidating concrete (mean cube strength >80 MPa and needs no compaction for consolidation) was carried out. Several mixes suitable for making such high-performance concrete have been developed and it was found that the addition of condensed silica fume may, under favourable conditions, increase not only the strength but also the workability of the concrete mix. Based on the trial mix results, charts for the design of high-strength, high-workability concrete mixes made of the studied constituents are presented.Key words: condensed silica fume, high-strength concrete, self-consolidating concrete.

scholarly journals Early-Age Strength of Ultra-High Performance Concrete in Various Curing Conditions

Materials ◽  
2015 ◽  
Vol 8 (8) ◽  
pp. 5537-5553 ◽  
Author(s):  
Jong-Sup Park ◽  
Young Kim ◽  
Jeong-Rae Cho ◽  
Se-Jin Jeon
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Early Age ◽  
Ultra High Performance Concrete ◽  
Curing Conditions

scholarly journals Rheological Properties Of Self-Consolidating Concrete Incorporating Natural And Industrial Pozzolans

2021 ◽  
Author(s):  
Asaad Mousa
Keyword(s):  
Rheological Properties ◽  
Yield Stress ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cost Effective ◽  
Sustainable Construction ◽  
Self Consolidating Concrete ◽  
Supplementary Cementing Materials ◽  
Passing Ability

Self-consolidation concrete (SCC) is the latest version of high performance concrete with excellent workability and high resistance to segregation and bleeding. The main objective of this project is to study the rheological properties of SCC incorporating natural and industrial pozzolans (silica fume and metakaolin, repectively) as supplementary cementing materials (SCMs). Use of such pozzolanic materials in the development of environmentally friendly and cost effective SCC can lead to sustainable construction. In this project eleven SCC mixtures are developed by incorporating different percentages of silica fume (SF) and metakaolin (MK) as replacement of cement. However, the water cement ratio of all SCC mixtures are optimized so that all mixtures satisfied the requirements of SCC in terms of fresh properties such as workability, stability, passing ability, bleeding and segregation resistance. This study particularly concentrates on evaluation of the rheological properties such as viscosity and yield stress of developed silica fume and metakaolin based SCC mixtures. The influence of SF and MK dosages on viscosity and yield stress of SCC mixtures are evaluated. Correlations among fresh and rheological properties are developed and critically reviewed to make recommendations.

Sign in / Sign up

Export Citation Format

Share Document