scholarly journals IMPROVEMENT OF VIBRATING FEEDERS-SCREENS FOR MINING AND METALLURGICAL INDUSTRY

2018 ◽  
Vol 61 (6) ◽  
pp. 470-477
Author(s):  
V. I. Lyashenko ◽  
V. Z. Dyatchin ◽  
V. P. Franchuk
Keyword(s):  
Mathematical Modeling ◽  
Driving Forces ◽  
Experimental Studies ◽  
Feasibility Studies ◽  
Metallurgical Industry ◽  
Spatial Oscillation ◽  
Loading Modes ◽  
Vibrating Feeders ◽  
Vibrating Feeder

The main scientific and practical results of the improvement of  vibrating feeders-screens for mining and metallurgical industry are  presented on the basis of dynamic calculation of the vibrating feederscreen with two differently directed self-balancing vibrators. Methods  of theoretical generalizations are described using mathematical statistics, physical and mathematical modeling, computation and feasibility studies, laboratory and full-scale experimental studies, industrial  tests in the conditions of operating enterprises using standard and new  methods. Mathematical modeling and calculation of the parameters of  a vibrating feeder of the PVG type are proposed. It is recommended  when choosing dynamic parameters of the feeder, to use the vibration  transmission coefficient, which is taken within the limits (1.5  –  3.5)g,   and in heavy loading modes, is up to 5g. It is shown that during preparation of breeze coke in the crushing body, from 10 to 50  % of fine  material is received from its bunker with a particle size of 0  –  3  mm,  which is additionally re-milled, reducing the quality of coke. A vibrating feeder-screen with a spatial oscillation of the working element will  increase the efficiency of screening of the material by 15  –  20  % and  will improve the self-cleaning of the screen. The driving forces of the  exciters are directed at different angles of 15 and 45° to the screening surfaceand are attached from each other at a distance equal to half  width of the box, i.e. 600  mm. It is established that in the resonance  mode at a constant amplitude with increasing frequency the coefficient  of the vibro-displacement regime increases according to a quadratic  dependence, at a working frequency of 100 rad/s it also increases from  the loading edge of the feeder to the unloading and from one side to  another, the value of which varies within 2.62  –  2.84.

scholarly journals Modelling of technological process of joining steel ropes with the use of powder antifriction material and a conductor

2021 ◽  
Vol 2131 (4) ◽  
pp. 042060
Author(s):  
E V Marchenko ◽  
A A Korotky ◽  
S I Popov ◽  
Ju V Marchenko ◽  
E E Kosenko
Keyword(s):  
Mathematical Modeling ◽  
Experimental Studies ◽  
Antifriction Material ◽  
Working Environment ◽  
Labor Process ◽  
Structural Defects ◽  
Field Observations ◽  
Steel Rope ◽  
Joint Section

Abstract When determining the causes of structural defects of a steel rope, the technology of carrying out work on splicing by a team of specialists was studied in detail. Field observations and experimental studies, as well as mathematical modeling of the process of structural defects formation in the rope joint section, allowed to establish that the cause is the imperfection of the existing technology for performing splice work [1-5]. The existing technology directly depends on the experience (professionalism) of a splicing team and provides for the work on splicing, as a solution to a new problem for every hawser, expressed in the design and calculation of the main parameters, according to the established standards of the rope manufacturer. It is noted that this labor function negatively affects a person, causing dangerous and harmful factors of the working environment, such as: severity and intensity of the labor process. Under the influence of dangerous and harmful factors, the specialist is subject to: static and dynamic overload, mental overstrain, neuropsychiatric overload, which negatively affect a person and, as a result, affect the quality of the work performed as a whole. The total accumulation of dangerous factors in the course of work leads to the decrease in the quality of the obtained results and deviation from the normalized indicators, which is unacceptable and leads to the formation of structural defects of a steel rope.

scholarly journals Experimental studies of the parameters of a positional sprinkler system

2021 ◽  
Vol 273 ◽  
pp. 07012
Author(s):  
Mikhail Kostenko ◽  
Vladimir Teterin ◽  
Dmitry Melnichuk ◽  
Sergei Mitrofanov ◽  
Alexey Podyablonskiy
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Analysis ◽  
Water Regime ◽  
Soil Layer ◽  
Experimental Studies ◽  
Sprinkler System ◽  
Agricultural Crops ◽  
Structural Diagram ◽  
Design Features

The most important factor affecting the yield of agricultural crops is the formation of an optimal water regime in the active soil layer. One of the main methods of carrying out such works is sprinkling, since it is closest to the process of natural precipitation. At the same time, existing water sprinklers do not provide watering agricultural lands that meets agro-technological requirements due to the design features and the specifics of the landscape on which they are used, forming in the process of watering zones with excessive and insufficient moisture. In this regard, a positional water sprinkler has been developed, which has the ability to water along a path close to rectangular. Obtaining this trajectory is achieved due to the design features obtained as a result of mathematical modeling. The article presents the structural diagram of the developed water sprinkler, considers the principle of its operation, presents the results of mathematical analysis and modeling of kinematic processes occurring during its operation. The above research results show that the use of the proposed water sprinkler will improve the quality of watering due to the watering trajectory closest to rectangular.

ABOUT NECESSITY OF MATHEMATICAL MODELING OF THE BUSINESS PROCESS OF COST ESTIMATE CALCULATIONS IN THE CONSTRUCTION OF OIL AND GAS FACILITIES

2017 ◽  
pp. 139-145
Author(s):  
R. I. Hamidullin ◽  
L. B. Senkevich
Keyword(s):  
Mathematical Modeling ◽  
Quality Assessment ◽  
Business Process ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Construction Organizations ◽  
The Cost ◽  
Cost Of Construction

A study of the quality of the development of estimate documentation on the cost of construction at all stages of the implementation of large projects in the oil and gas industry is conducted. The main problems that arise in construction organizations are indicated. The analysis of the choice of the perfect methodology of mathematical modeling of the investigated business process for improving the activity of budget calculations, conducting quality assessment of estimates and criteria for automation of design estimates is performed.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

scholarly journals The use of mathematical modelling to analyse the process of mixing waters from different sources in water supply system

2018 ◽  
Vol 59 ◽  
pp. 00025
Author(s):  
Agnieszka Szuster – Janiaczyk ◽  
Rafał Brodziak ◽  
Jędrzej Bylka
Keyword(s):  
Mathematical Modeling ◽  
Water Quality ◽  
Quality Criteria ◽  
Supply System ◽  
Network Control ◽  
Quality Of Water ◽  
Water Mains ◽  
Different Sources ◽  
Mixing Water

One of the processes that significantly determines the quality of water to consumers is the process of mixing water from different sources in the water mains. Put to the network two or more chemically and biologically stable waters may result in the formation of water that will be deprived of these features. This article presents the german guidelines for analysing water quality for mixing waters from different sources, in various proportions. Then performed an analysis of utility the mathematical models,including quality criteria, for use in network control. An IT tool has been developed to manage selected water quality processes using mathematical modeling. The basis for implementing the tool was a network model created in Epanet integrated with the Matlab.

Influence of different factors on the growth rate of young animals and the quality of beef

2021 ◽  
pp. 28-39
Author(s):  
V. N. Pristupa ◽  
D. S. Torosyan
Keyword(s):  
Experimental Studies ◽  
Live Weight ◽  
Federal District ◽  
Steppe Zone ◽  
Industrial Complex ◽  
Black And White ◽  
Dry Steppe ◽  
Intensive Rearing ◽  
Meat Productivity

The purpose of the work was to study and identify the main factors aff ecting the quantity and quality of beef produced and sold in the Southern Federal district. A comparative assessment of the growth, development, formation of meat productivity and quality of beef of young animals of beef, dual and dairy breeds with stall-pasture technology and intensive rearing in the industrial complex. Experimental studies have been carried out in farms in the Rostov region. The object of research was cows with calves of Kalmyk, Hereford, Aberdeen-Angus, Russian komolaya, Kazakh White-headed breeds, as well as young animals of the same breeds, in addition, Black-and-White and Swiss breeds. Removable live weight in Hereford steers at 18 months of age was 658,0 kg, and Aberdeen-Angus – 655,2 kg. Domestic steers of Kalmyk were 41–44 kg lower in live weight than their herdmates of two imported breeds. However, with intensive rearing at 18 months of age, steers of Kalmyk breed had a removable live weight of more than 613,7 kg and a carcass weight of 326 kg. The yield of hot carcass was 55,4 %, and the slaughter yield was 58,89 %, which was only 1–2 % lower than the world’s leading beef breeds. It has been found when analyzing the results of boning the half-carcasses of experimental steers that the biggest weight of half-carcasses and the content of muscle and fat tissue in them in absolute terms were in Hereford steers. Steers of Kalmyk breed took the third place in terms of weight of large-sized semi–fi nished products and signifi cantly lost to Aberdeen-Angus herdmates by 7,3 kg or 6,5 %, and Hereford steers by 9,2 kg or 8,3 %. The results obtained prove the expediency of using stallpasture technology in the dry-steppe zone of the Southern Federal district when rearing young animals for beef up to 350–400 kg live weight at 15 months of age and its subsequent intensive rearing under industrial technology, in order to obtain the live weight of more than 570 kg and produce cost-eff ective beef.

Method of experimental evaluation of the efficiency coefficient of vibration protection of the rope-rod coupling "MAMSAR+A" of the diesel generator set DGA-8.83

2021 ◽  
pp. 88-95
Author(s):  
М.А. Минасян ◽  
А.М. Минасян ◽  
Ц. Цзэн
Keyword(s):  
Experimental Evaluation ◽  
Vibration Isolation ◽  
Experimental Studies ◽  
Original Method ◽  
Efficiency Coefficient ◽  
Diesel Generator ◽  
Vibration Protection ◽  
Rigid Connection ◽  
Two Stages

Объектом исследования является опытный образец запатентованной канатностержневой муфты (КСМ) «MAMSAR+А» в качестве привода дизель-генераторного агрегата ДГА-8,83 мощностью 9,56 кВт при частоте вращения 1500 мин-1 с дизелем 2Ч 8,5/11 и генератором «ГК-5,6». Целью исследования является экспериментальная оценка коэффициента эффективности вибрационной защиты КСМ. Поставленная цель достигается разработкой и реализацией оригинальной методики экспериментальной оценки коэффициента эффективности КСМ с анализом и выводами результатов экспериментальных исследований. Экспериментальные исследования проводятся в два этапа. Первый этап – с упругим соединением КСМ, второй этап – с жестким соединением. Оригинальность методики экспериментальной оценки коэффициента эффективности вибрационной защиты КСМ главным образом заключается в том, что между двумя этапами экспериментальных исследований КСМ не демонтируется. Следовательно, качество центровки не нарушается. Усредненный коэффициент эффективности виброизоляции КСМ составляет от 3 до 8 дБ. The object of this research is a prototype of the patented wire rope coupling (KSM) "MAMSAR+A" as a drive for a diesel-generator unit DGA-8.83 with a power of 9.56 kW at a speed of 1500 min-1 with a 2CH 8.5/11 diesel engine and a generator "KG-5.6". The aim of the research is to experimentally evaluate the efficiency coefficient of vibration protection of the KSM. This goal is achieved by developing and implementing an original method for experimental evaluation the efficiency coefficient of the KSM with analysis and conclusions of the results of experimental studies. Experimental studies are conducted in two stages. The first stage - with an elastic connection of the coupling, the second stage - with a rigid connection. The originality of the method of experimental evaluation of the efficiency coefficient of vibration protection of the KSM mainly lies in the fact that the KSM is not dismantled between the two stages of experimental research. Therefore, the quality of alignment is not violated. The average coefficient of vibration isolation efficiency of the KSM is from 3 to 8 dB.

Sign in / Sign up

Export Citation Format

Share Document