scholarly journals Thermophysical parameters of corn and wheat flour

2012 ◽  
Vol 49 (No. 4) ◽  
pp. 157-160 ◽  
Author(s):  
M. Božiková
Keyword(s):  
Moisture Content ◽  
Wheat Flour ◽  
Moisture Transfer ◽  
Raw Materials ◽  
Wheat Grain ◽  
Corn Flour ◽  
Specific Kind ◽  
Physiological Processes ◽  
Macroscopic Structure

This article deals with thermophysical properties of nutritive raw materials particularly of corn and wheat granary mass. It is necessary to know thermophysical performance of granary mass for protection of quality of technological process by processing to final products. Granary mass consist of grains complex of specific kind. It is non uniform material in microscopic and macroscopic structure. There are enacted biophysical and physiological processes. Heat transfer can not be isolated by solid transfer and heat &ndash; moisture transfer. It means that specification of granary mass and granary fragments is difficult to determine. We researched thermal properties of fragments of corn and wheat grain, concretely corn and wheat flour. In the first series of measurements we measured relations of thermal conductivity&nbsp; to the moisture content&nbsp; in range (2&divide;18) % for two different samples &ndash; corn flour and wheat flour. Function f ( to bulk density <sub>S</sub>, samples had identical moisture content 6.5%. For size of corn and wheat grains in range (0.063&divide;0.5) mm this is polynomical function. Measured results are corresponding with results at present literature (Ginzburg et al. 1985).

Possibilities of using infrared radiation in the food industry when processing raw materials for bakery production

2021 ◽  
pp. 87-93
Author(s):  
I. P. Mitrofanova ◽  
I.A. Nikitin ◽  
A.N. Yakovlev
Keyword(s):  
Wheat Flour ◽  
Infrared Radiation ◽  
Food Industry ◽  
Raw Materials ◽  
Microbiological Contamination ◽  
Wheat Grain ◽  
Applied Method ◽  
Physical Principles

The article provides an overview of studies on the use of infrared radiation in the food industry. Examples of its effect on the quality of wheat grain, as well as baking properties and microbiological contamination of wheat flour are considered. The physical principles of operation of this technology and the properties of the applied method are analyzed.

scholarly journals Extrusion cooking of wet mixtures of wheat flour with carrot bagasse in technology of ready-to-eat products

2018 ◽  
Vol 80 (3) ◽  
pp. 43-49
Author(s):  
A. Yu. Sharikov ◽  
V. I. Stepanov ◽  
V. V. Ivanov ◽  
D. V. Polivanovskaya ◽  
M. A. Amelyakina
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Wheat Flour ◽  
Fruits And Vegetables ◽  
Raw Materials ◽  
Middle Part ◽  
Extrusion Cooking ◽  
High Moisture ◽  
By Products

The actual challenge for the food industry is the utilization of by-products of fruit and vegetable processing and their use in the production of enriched food products. It allows to use raw materials with a high content of biological active substances more efficiently and rationally. The possibility of using carrot bagasse as an ingredient in the preparation of extruded ready-to-eat product was studied. The wheat meal was used as core ingredient. The influence of the bagasse dosage on the extrusion conditions and the properties of the extrudates samples was studied. It was shown that an increase of the bagasse content more than 20% influenced the quality of the product negatively.The expansion index decreased more than 2 times and the bulk density increased by 40%. The method of additional steam venting from the middle part of the extruder chamber was investigated during the extrusion cooking of mixtures with the bagasse content more than 20% and moisture content 26.5, 28.9 and 34.5%.The indicator of the steam venting was the reduction of pressure in the degassing installation. As a result, the moisture content of the material in the die zone of the extruder chamber decreased. It was shown that additional steam venting during extrusion of high-moisture mixtures led to more severe extrusion conditions. The temperature, die pressure and torgue increased significantly. It imroved the quality of extrudates. Steam venting during extrusion of blends with 26.5 and 28.9% moisture increased expansion index more than 2 times and decreased the bulk density by 21-25%.Extrusion process of a mixture with a moisture content of 34.5% without and with steam venting was unstable and did not allowed to obtain samples of extrudates with acceptable quality. The proposed method for extrusion of high-moisture blend of wheat flour with carrot bagasse can be basis for developing technologies for the production of ready-to-eat extruded products using moist food by-products of fruits and vegetables processing.

RESEARCH OF THE POSSIBILITY OF COOKING GLUTEN-FREE COOKIES WITH THE USE OF HYDROCOLLOIDS

2021 ◽  
Author(s):  
А.К. СТРЕЛКОВА ◽  
И.Б. КРАСИНА ◽  
К.Н. СТОРЧЕУС ◽  
Е.В. ФИЛИППОВА
Keyword(s):  
Wheat Flour ◽  
Xanthan Gum ◽  
Guar Gum ◽  
Raw Materials ◽  
Sensory Properties ◽  
Gluten Free ◽  
Water Binding ◽  
Gum Tragacanth ◽  
Confectionery Products

Необходимость разработки безглютеновых продуктов обусловлена ростом численности людей страдающих целиакией, распространенность которой составляет 1 случай на 100–200 человек населения. Решение проблем, возникающих при производстве безглютеновых мучных кондитерских изделий, делает актуальным поиск новых видов сырья, не содержащего глютен и способного улучшать потребительские свойства изделий. В качестве источника безглютенового сырья была выбрана гречневая мука (ГМ). Получено безглютеновое печенье из ГМ в сочетании с различными гидроколлоидами – камедями акации, трагаканта, гуаровой и ксантановой, которые по отдельности добавляли в образцы ГМ в количестве 1г/100 г, и исследовано его физико-химические и сенсорные свойства в сравнении с аналогичными свойствами печенья из пшеничной муки (ПМ). Установлено, что образцы ГМ с добавкой камедей имеют более высокое содержание влаги, а печенье, полученное из смеси ГМ с камедью по разработанной нами технологии, – большую толщину, массу и сниженную прочность при разрушении по сравнению с ГМ и печеньем, изготовленным из нее. При сенсорной оценке качества изделий, проведенной по девятибалльной гедонистической шкале, установлено, что самые высокие показатели качества имеет печенье из ПМ, самые низкие – печенье, приготовленное из ГМ. Внесение камедей улучшило сенсорные показатели изделий на основе ГМ. Лучшим признан образец печенья на основе ГМ с добавлением ксантановой камеди. Таким образом, использование гидроколлоидов улучшает водосвязывающую способность муки и сенсорные показатели изделия – цвет, аромат, вкус и дает возможность получить безглютеновое печенье достаточно высокого качества, сопоставимого с качеством печенья из пшеничной муки. The need to develop gluten-free products is due to the growing number of people suffering from celiac disease, the prevalence of which is 1 case per 100–200 people of the population. Solving the problems that arise in the production of gluten-free flour confectionery products makes it relevant to search for new types of raw materials that do not contain gluten and can improve the consumer properties of products. Buckwheat flour (BF) was chosen as a source of gluten-free raw materials. Gluten-free cookies from BF were obtained in combination with various hydrocolloids-acacia, tragacanth, guar and xanthan gums, which were separately added to BF samples in the amount of 1 g/100 g, and its physical and chemical and sensory properties were studied in comparison with similar properties of wheat flour cookies (WF). The purpose of this work is to obtain gluten-free cookies from BF in combination with various hydrocolloids – acacia gum, tragacanth, guar gum and xanthan gum, which were separately added to BF in the amount of 1 g/100 g, and to study its physical, chemical and sensory properties in comparison with similar properties of cookies from WF. It was found that the samples of BF with the addition of gums have higher moisture content, and the cookies obtained from a mixture of BF with gum according to the technology developed by us – a greater thickness, weight and reduced strength at destruction compared to BF and cookies made from it. In the sensory evaluation of the quality of products conducted on a nine-point hedonistic scale, it was found that the highest quality indicators are cookies made from WF, the lowest – cookies made from BF. The introduction of gums improved the sensory performance of BF-based products. A sample of BF-based cookies with the addition of xanthan gum was recognized as the best. Thus, the use of hydrocolloids improves the water-binding ability of flour and the sensory characteristics of the product – color, aroma, taste, and makes it possible to obtain gluten-free cookies of sufficiently high quality, comparable to the quality of cookies made from wheat flour.

Research of drying kinetics of prepared wheat flour

2021 ◽  
Vol 9 (16) ◽  
pp. 212-220
Author(s):  
Liubomyr Khomichak ◽  
◽  
Inha Kuznietsova ◽  
Svetlana Vysotska ◽  
Sergiy Tkachenko ◽  
...  
Keyword(s):  
Moisture Content ◽  
Wheat Flour ◽  
Raw Materials ◽  
Control Sample ◽  
Raw Material ◽  
Convective Drying ◽  
Kinetic Dependence ◽  
Vital Functions ◽  
Kinetic Coefficients ◽  
Kinetics Of

Introduction. Processing of grain raw material with influence on starch or albumens by application of heat treatment creates the variety of functional properties of a product and is perspective in the modern terms vital functions of man. Research methods and methods. The flour obtained from wheat of the Ascanian wheat and from wheat of the soft varieties: Sophia ("sweet wheat"), Blond (soft) and Chornobrova (enriched with micro- and macronutrients) were used in the study. Thermal modification of flour samples was carried out in a convective manner. The control sample for determining the quality indicators is obtained in industrial conditions, extruded wheat flour produced by LLC "AS groups, LTD". Research results. The obtained kinetic dependence shows the gradual loss of moisture standards with different speed which accordingly influences on duration of drying. The moisture content of the drying agent most affects the intensity at the initial stage of the constant drying rate. With an increase in the moisture content of the coolant, the period of constant drying increases and the amount of evaporated moisture increases during this period. With the subsequent removal of moisture from raw materials, the degree of influence of this parameter on the intensity decreases. The nature of the drying curves is the same and the recommended process for obtaining modified flour is the process duration of 300 minutes or 5 hours. It was determined microscopically, that the samples of dried wheat flour have a purpose and are partially destroyed by starch granules and amorphization of biocomposite materials. Based on the data on the kinetics of drying flour samples, the kinetic coefficients and values of the critical moisture content for drying wheat flour were calculated, which is 1.18-1.30 %. It was determined that for the sensorial indicators the obtained samples have indicators characteristic of the varietal characteristics of wheat, from which the flour was taken. In terms of physical and chemical parameters, the modified wheat flour samples are not inferior to the well-known industrial sample of extruded flour. Conclusions. Use of flour, obtained from the wheat with different correlation of amilose and amylopectin, positively influences on a technological process and allows to extend the assortment of modified starch products, and accordingly, food products. Kinetics of the convective drying standards of the flour is investigated. Researches showed that a it is physically modified flour obtained from the different sorts of the soft wheat is not inferior in quality to the extruded wheat flour.

scholarly journals Use of by-products of millet, amaranth and sorghum grains in bakery production

2020 ◽  
Vol 17 ◽  
pp. 00047
Author(s):  
A.V. Volkova ◽  
A. V. Kazarina ◽  
O. N. Antimonova ◽  
Yu. Yu. Nikonorova ◽  
E. A. Atakova
Keyword(s):  
Wheat Flour ◽  
Raw Materials ◽  
Bakery Products ◽  
Systematic Analysis ◽  
Composite Mixture ◽  
Biotechnological Processes ◽  
Processed Products ◽  
Cereal Industry ◽  
Positive Effect

The use of additional gluten-free grain raw materials in the form of flour or secondary raw materials of cereal industry in the recipes of bakery products allows regulating the biotechnological processes of dough maturing and proofing, obtaining a finished product with new functional properties and high nutritional value. The purpose of the research is to justify experimentally the use of processed products of amaranth grain and sorghum for the production of bread of high quality and functionality. The methodological basis of the study is presented by a systematic analysis of the technology for the production of bakery products enriched with promising phyto-fortifiers. In accordance with the chosen methodology, the chemical composition is analyzed and the positive effect of the use of flour from millet grain, sorghum and amaranth seeds in the mixture with premium wheat flour on the quality of bread is experimentally justified. It was found that the introduction of these types of additional raw materials had a positive effect on the activation of baking yeast and the maturation of dough. In the production of bread from wheat flour of the highest grade, it is optimal to use these phyto-fortifiers in the amount of 3% by weight of the composite mixture.

Quality Characteristics of Cake-type Doughnuts Containing Peanut, Cowpea, and Soybean Flours

1982 ◽  
Vol 9 (2) ◽  
pp. 101-103 ◽  
Author(s):  
Kay H. McWatters
Keyword(s):  
Moisture Content ◽  
Wheat Flour ◽  
Quality Characteristics ◽  
Soybean Flour ◽  
Fat Absorption ◽  
Legume Flour

Abstract Ten percent of the wheat flour in cake-type buttermilk doughnuts was replaced with flours processed from prepress, solvent-extracted peanuts; partially defatted, untoasted peanuts; partially defatted, toasted peanuts; and dry cowpeas. The legume-supplemented doughnuts were prepared with and without soybean flour, which is frequently added to doughnut formulations to control fat absorption during frying. The quality of test doughnuts was assessed by comparison to wheat flour reference doughnuts. Good machinability and frying characteristics were observed in reference and test batters. Legume-supplemented doughnuts scored favorably in sensory comparisons with reference doughnuts and were similar in moisture content. Oil levels of legume flour-supplemented doughnuts were the same or less than that of reference doughnuts and were more acceptable than levels reported in an earlier study which utilized the legumes in the form of meal.

Effects of enzyme activities during steeping and sprouting on the solubility and composition of proteins, their bioactivity and relationship with the bread making quality of wheat flour

2016 ◽  
Vol 7 (10) ◽  
pp. 4323-4331 ◽  
Author(s):  
Slađana Žilić ◽  
Marijana Janković ◽  
Miroljub Barać ◽  
Mirjana Pešić ◽  
Aleksandra Konić-Ristić ◽  
...  
Keyword(s):  
Wheat Flour ◽  
Enzyme Activities ◽  
Wheat Grain ◽  
Bread Making ◽  
Functional Consequences

The aim was to determine the effect of steeping and sprouting on wheat grain proteins and the functional consequences in this regard.

scholarly journals GUAR GUM ADDITION ON PHYSICAL CHARACTERISTICS OF EXTRUDED DRY CORN NOODLE FROM MIXTURE OF WET AND DRY CORN FLOURS

2020 ◽  
Vol 11 (1) ◽  
pp. 39
Author(s):  
Aminullah Aminullah ◽  
Tjahja Muhandri ◽  
Subarna Subarna
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Shelf Life ◽  
Guar Gum ◽  
Physical Characteristics ◽  
Cooking Loss ◽  
Drying Process ◽  
Corn Flour ◽  
Physical Quality

The drying process of corn noodles was an effort to increase the shelf life and it was a form of noodles diversification. The objective of this research was to study and analyze the effect of guar gum addition on the physical quality of the extruded dry corn noodle made from a mixture of wet and dry corn flour. Manufacturing dry corn noodles was conducted using wet corn noodles from a mixture of wet and dry corn flour, which was then dried in a tray dryer at a temperature of 60-70 °C for 1 - 1.5 hours. The treatments used were a combination of alum levels of 0.01%; moisture content of 80% (dry base); and guar gum concentration of 0%, 1%, and 2%. Physical properties of dry corn noodles included rehydration time, hardness, adhesiveness, suppleness, elongation, and cooking loss. The results showed that the optimum rehydration time for dry corn noodles was about 9 minutes. The addition of guar gum to the physical qualities of dry corn noodles tended not to be significant statistically, but as a score, an increase in guar gum levels tended to increase the elongation of dry corn noodles. While, increasing levels of guar gum tended to reduce the stickiness and cooking loss levels of them.

scholarly journals Effects of Mixing Duration and Raw Materials on the Physicochemical, Microstructural and Sensorial Properties of Sausages Prepared From Red Tilapia (Oreochromis sp.)

2021 ◽  
Vol 34 (4) ◽  
Author(s):  
ABU BAKAR ASYRUL-IZHAR ◽  
◽  
NORIZAH MHD SARBON ◽  
MOHAMMAD RASHEDI ISMAIL-FITRY
Keyword(s):  
Moisture Content ◽  
Linear Expansion ◽  
Raw Materials ◽  
Raw Material ◽  
Colour Properties ◽  
Mixing Times ◽  
Sensory Acceptability ◽  
Water Holding ◽  
Carbohydrate Contents

Tilapia can be commercialised to produce sausages. However, the use of minced tilapia or tilapia surimi as the raw material and different mixing durations of the ingredients using the bowl cutter during the sausage production could affect the quality of the products. This study determined the effects of different mixing durations (10, 15 or 20 min) on the physicochemical, microstructural and sensorial properties of sausages made from minced tilapia and tilapia surimi. The washing of the minced tilapia during the surimi production significantly increased the tilapia surimi moisture content and pH, while reducing the protein, fat and ash contents. Subsequently, the addition of other ingredients to produce the sausages influenced the moisture, fat, ash and carbohydrate contents of both types of sausages. The type of raw material and mixing duration showed significant interactions in terms of linear expansion, water holding capacity and colour properties of the sausages. Individually, the tilapia surimi sausage had a better linear expansion, cohesiveness, colour and sensory acceptability than the minced tilapia sausage. The mixing times of 15 and 20 min produced better results for the physicochemical and sensory properties of both types of sausages. However, the gel strengths of both types of sausages were better when mixed for 15 min and the microstructure images supported this. Based on the results obtained, this study concluded that tilapia surimi as the raw material with 15 min of mixing duration is recommended to produce a better-quality sausage.

scholarly journals Study of the effect of vegetable raw materials on the rheological parameters and vitamin composition of pasta

2021 ◽  
pp. 5-10
Author(s):  
T. Akhlan ◽  
G. Zhumaliyeva ◽  
N. Zhuman ◽  
B. Abilmazhin ◽  
N. Spatay
Keyword(s):  
Formic Acid ◽  
Raw Materials ◽  
Rheological Parameters ◽  
Corn Flour ◽  
Laboratory Conditions ◽  
Vegetable Raw Materials ◽  
Better Than

In this article, the rheological and vitamin composition of the dough prepared by adding nettle flour and corn flour as non-traditional raw materials to the composition of pasta under laboratory conditions is studied. The results of previous studies of dioecious nettle have shown that the plant contains a certain amount of carotene, calcium, formic acid and panthenonic acid. These indicators indicate an improvement in the vitamin composition of pasta prepared according to the new recipe. The rheological quality of the dough, the vitamin composition of the finished product prepared according to the first sample, including 20% corn flour and 2% nettle flour (Urtica dioca L) in the recipe, show that the quality of this sample is better than that of the control and second sample, and is approved as an effective sample for the preparation of new types of pasta.

Sign in / Sign up

Export Citation Format

Share Document