scholarly journals PROBLEMS OF MODELING THE PRODUCTION SPHERE OF AN ENTERPRISE WITH A NONLINEAR FUNCTION «OUTPUT-COSTS»

Author(s):  
D.A. Maksimov
Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 72
Author(s):  
Suresh Kumar Thappeta ◽  
S. Murty Bhallamudi ◽  
Venu Chandra ◽  
Peter Fiener ◽  
Abul Basar M. Baki

Three-dimensional numerical simulations were performed for different flow rates and various geometrical parameters of step-pools in steep open channels to gain insight into the occurrence of energy loss and its dependence on the flow structure. For a given channel with step-pools, energy loss varied only marginally with increasing flow rate in the nappe and transition flow regimes, while it increased in the skimming regime. Energy loss is positively correlated with the size of the recirculation zone, velocity in the recirculation zone and the vorticity. For the same flow rate, energy loss increased by 31.6% when the horizontal face inclination increased from 2° to 10°, while it decreased by 58.6% when the vertical face inclination increased from 40° to 70°. In a channel with several step-pools, cumulative energy loss is linearly related to the number of step-pools, for nappe and transition flows. However, it is a nonlinear function for skimming flows.


2011 ◽  
Vol 48-49 ◽  
pp. 17-20
Author(s):  
Chun Li Xie ◽  
Tao Zhang ◽  
Dan Dan Zhao ◽  
Cheng Shao

A design method of LS-SVM based stable adaptive controller is proposed for a class of nonlinear continuous systems with unknown nonlinear function in this paper. Due to the fact that the control law is derived based on the Lyapunov stability theory, the scheme can not only solve the tracking problem of this class of nonlinear systems, but also it can guarantee the asymptotic stability of the closed systems, which is superior to many LS-SVM based control schemes. The effectiveness of the proposed scheme is demonstrated by simulation results.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1816
Author(s):  
Hailun Xie ◽  
Li Zhang ◽  
Chee Peng Lim ◽  
Yonghong Yu ◽  
Han Liu

In this research, we propose two Particle Swarm Optimisation (PSO) variants to undertake feature selection tasks. The aim is to overcome two major shortcomings of the original PSO model, i.e., premature convergence and weak exploitation around the near optimal solutions. The first proposed PSO variant incorporates four key operations, including a modified PSO operation with rectified personal and global best signals, spiral search based local exploitation, Gaussian distribution-based swarm leader enhancement, and mirroring and mutation operations for worst solution improvement. The second proposed PSO model enhances the first one through four new strategies, i.e., an adaptive exemplar breeding mechanism incorporating multiple optimal signals, nonlinear function oriented search coefficients, exponential and scattering schemes for swarm leader, and worst solution enhancement, respectively. In comparison with a set of 15 classical and advanced search methods, the proposed models illustrate statistical superiority for discriminative feature selection for a total of 13 data sets.


2007 ◽  
Vol 17 (10) ◽  
pp. 3455-3460 ◽  
Author(s):  
ARŪNAS TAMAŠEVIČIUS ◽  
TATJANA PYRAGIENĖ ◽  
MANTAS MEŠKAUSKAS

Nonvanishing 𐑍-shaped nonlinear function has been introduced in delay dynamical system instead of commonly used Mackey–Glass type function. Depending on time delay the system exhibits not only mono-scroll, but also more complex two-scroll hyperchaotic attractors. Delay system with the novel nonlinear function can be implemented as an analogue electronic oscillator.


2011 ◽  
Vol 383-390 ◽  
pp. 7328-7331
Author(s):  
Lan Jiang Zhang ◽  
Gui Jie Wang

Designed the control system policy for automobile electric seat using fuzzy control technology, therefore established its control model by Fuzzy Logic Toolbox, and carried on the off-line simulation to choose controller's optimum control parameters. From the dynamic viewpoint, the auto electric seat adjustment system is not only a complex nonlinear function which includes the location of the DC servo motor and the speed, but also contains serious nonlinear coupling interference, so the system is a highly nonlinear strong coupling, variable multivariable system. Application of traditional control methods (such as traditional PID) is difficult to meet its order requirements, so the research is highly robust method of intelligent control is an effective way to solve the problem. Fuzzy control technology has become the field in which drawn greater attention and researched in recent years. It doesn’t depend on the mathematical model of controlled object, has a good robustness, and nonlinear control characteristics, so it is an effective means to control the object with time-varying, non- linear parameters. In this paper, fuzzy control technology to achieve the orders of auto electric seat adjustment control system functions in the Literature [1], and the tracking of the system was simulated.


2011 ◽  
Vol 135-136 ◽  
pp. 1168-1170
Author(s):  
Ping Li ◽  
He Yan Li ◽  
Ling Ling Tang ◽  
Jun Li Li ◽  
Dong Yang Guo

A new feeding form is designed as a discontinued T-shaped in this paper. This paper also models a function with restrict conditions, a set of data is educed by optimizing nonlinear function, which is transformed through adding penalty function. At last, when the two-set coaxial impedance matching apparatus is fixed on the antenna, a comparison of simulator between the impedance and without it indicates that the matching results are satisfactory.


Sign in / Sign up

Export Citation Format

Share Document