scholarly journals Energy Loss in Steep Open Channels with Step-Pools

Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 72
Author(s):  
Suresh Kumar Thappeta ◽  
S. Murty Bhallamudi ◽  
Venu Chandra ◽  
Peter Fiener ◽  
Abul Basar M. Baki
Keyword(s):  
Energy Loss ◽  
Flow Rate ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Nonlinear Function ◽  
Open Channels ◽  
Geometrical Parameters ◽  
Transition Flow ◽  
Cumulative Energy ◽  
Zone Velocity

Three-dimensional numerical simulations were performed for different flow rates and various geometrical parameters of step-pools in steep open channels to gain insight into the occurrence of energy loss and its dependence on the flow structure. For a given channel with step-pools, energy loss varied only marginally with increasing flow rate in the nappe and transition flow regimes, while it increased in the skimming regime. Energy loss is positively correlated with the size of the recirculation zone, velocity in the recirculation zone and the vorticity. For the same flow rate, energy loss increased by 31.6% when the horizontal face inclination increased from 2° to 10°, while it decreased by 58.6% when the vertical face inclination increased from 40° to 70°. In a channel with several step-pools, cumulative energy loss is linearly related to the number of step-pools, for nappe and transition flows. However, it is a nonlinear function for skimming flows.

Study of a Pseudo Bipolar Design for a Piezoelectric Proton Exchange Membrane Fuel Cell With Nozzle and Diffuser

2010 ◽  
Author(s):  
Hsiao-Kang Ma ◽  
Jyun-Sheng Wang ◽  
Ya-Ting Chang
Keyword(s):  
Fuel Cell ◽  
Flow Rate ◽  
Proton Exchange Membrane ◽  
Produced Water ◽  
Three Dimensional ◽  
Proton Exchange ◽  
Cell Performance ◽  
Water Flooding ◽  
Geometrical Parameters ◽  
Exchange Membrane

Previous studies of a piezoelectric proton exchange membrane fuel cell with nozzle and diffuser (PZT-PEMFC-ND) have shown that a PZT device could solve flooding problems and improve cell performance. The results also indicated that the rectification efficiency (γ) of the diffuser elements, the PZT vibrating frequency (f), and the displaced volume per stroke (ΔV) affected the flow rate of the PZT device. The rectification efficiency of the diffuser elements, which is an indicator of the preferential direction, depends on the geometrical parameters (AR and θ) and the Reynolds number. In this study, an innovative design for a PZT-PEMFC-ND bi-cell with pseudo bipolar electrodes was developed to achieve a higher power in the stack design to solve water flooding problems and improve cell performance. This new design, with a reaction area of 8 cm2, contains two cells with two outside anodes and two inside cathodes that share a common PZT vibrating device for pumping air flow. The influence of the varying aspect ratio (AR) of the diffuser elements on the unit cell flow rate were investigated using a three-dimensional transitional model. The results show that a proper AR value of 11.25 for the diffuser with a smaller θ of 5° could ensure a smoother intake of the air and thus better cell performance. A lower AR value of 5.63 resulted in smaller actuation pressure inside the chamber, and thus the produced water could not be pumped out. However, a larger AR of 16.88 induced a blocking phenomenon inside the diffuser element, and thus less air was sucked into the cathode chamber. The performance of the PZT-PEMFC-ND bi-cell could be 1.6 times greater than that of the single cell. This performance may be influenced by the phase difference of the operating modes.

Numerical assessment of hydrodynamic and mixing characteristics for mixed electroosmotic and pressure-driven flow through a wavy microchannel with patchwise surface heterogeneity

2021 ◽  
pp. 095440892110516
Author(s):  
Kasavajhula Naga Vasista ◽  
Sumit Kumar Mehta ◽  
Sukumar Pati
Keyword(s):  
Zeta Potential ◽  
Pressure Gradient ◽  
Flow Rate ◽  
Recirculation Zone ◽  
Wavy Surface ◽  
Mixing Efficiency ◽  
Relative Pressure ◽  
Gradient Strength ◽  
Zone Velocity ◽  
Flow Through

The micromixing of two fluids plays a vital role in lab-on-a-chip devices. For obtaining better mixing efficiency, we propose a micromixer using patchwise surface potential heterogeneity and wavy wall. We numerically investigate the hydrodynamic and mixing characteristics for flow through a microchannel with a straight top wall and wavy bottom wall. The primary flow is actuated by an external pressure-gradient and patches are placed at the top wall with positive zeta potential, such that the reversed electroosmotic actuation forms the recirculation zones close to the top wall. The streamlines, flow velocity, recirculation zone velocity, species concentration, flow rate, and mixing efficiency are investigated by varying the relative pressure-gradient strength, Debye parameter, zeta potential and wavy surface amplitude. Two different configurations are considered by placing the patches at the top wall, opposite to the peaks and valleys of the bottom wavy surface, respectively. It reveals that the recirculation zone velocity increases with the increase in both Debye parameter and surface amplitude, whereas it decreases with relative pressure-gradient strength near the patch surfaces. The flow rate decreases with the increase in zeta potential and we also identify the values of zeta potential for chocking of flow in the microchannel. It reveals that the mixing efficiency monotonically increases with surface amplitude, and the variation with zeta potential is non-monotonic. We also identify the range of zeta potential for which the value of mixing efficiency is higher than 90% for different configurations of the channel.

Valence electron energy loss spectroscopy in reflection geometry

1989 ◽  
Vol 47 ◽  
pp. 378-379
Author(s):  
J. Liu ◽  
J. M. Cowley
Keyword(s):  
Energy Loss ◽  
Valence Electron ◽  
Interband Transition ◽  
Specular Reflection ◽  
Three Dimensional ◽  
Electron Excitation ◽  
Transmission Electron ◽  
Yield Information ◽  
Valence Bands ◽  
Excitation Processes

The low energy loss region of a EELS spectrum carries information about the valence electron excitation processes (e.g., collective excitations for free electron like materials and interband transitions for insulators). The relative intensities and the positions of the interband transition energy loss peaks observed in EELS spectra are determined by the joint density of states (DOS) of the initial and final states of the excitation processes. Thus it is expected that EELS in reflection mode could yield information about the perturbation of the DOS of the conduction and valence bands of the bulk crystals caused by the termination of the three dimensional periodicity at the crystal surfaces. The experiments were performed in a Philipps 400T transmission electron microscope operated at 120 kV. The reflection EELS spectra were obtained by a Gatan 607 EELS spectrometer together with a Tracor data acquisition system and the resolution of the spectrometer was about 0.8 eV. All the reflection spectra are obtained from the specular reflection spots satisfying surface resonance conditions.

scholarly journals A Numerical Study of Sub-Millisecond Integrated Mix-and-Inject Microfluidic Devices for Sample Delivery at Synchrotron and XFELs

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey
Keyword(s):  
Molecular Dynamics ◽  
Flow Rate ◽  
Numerical Study ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Liquid Jets ◽  
Mixing Efficiency ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Time Required

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

Prediction of internal geometry and tensile behavior of 3D woven solid structures by mathematical coding

2021 ◽  
pp. 152808372110013
Author(s):  
Vivek R Jayan ◽  
Lekhani Tripathi ◽  
Promoda Kumar Behera ◽  
Michal Petru ◽  
BK Behera
Keyword(s):  
Volume Fraction ◽  
Three Dimensional ◽  
Areal Density ◽  
Woven Fabrics ◽  
Tensile Behavior ◽  
Geometrical Parameters ◽  
Fiber Volume ◽  
Acceptable Error ◽  
Internal Geometry ◽  
Unit Cells

The internal geometry of composite material is one of the most important factors that influence its performance and service life. A new approach is proposed for the prediction of internal geometry and tensile behavior of the 3 D (three dimensional) woven fabrics by creating the unit cell using mathematical coding. In many technical applications, textile materials are subjected to rates of loading or straining that may be much greater in magnitude than the regular household applications of these materials. The main aim of this study is to provide a generalized method for all the structures. By mathematical coding, unit cells of 3 D woven orthogonal, warp interlock and angle interlock structures have been created. The study then focuses on developing code to analyze the geometrical parameters of the fabric like fabric thickness, areal density, and fiber volume fraction. Then, the tensile behavior of the coded 3 D structures is studied in Ansys platform and the results are compared with experimental values for authentication of geometrical parameters as well as for tensile behavior. The results show that the mathematical coding approach is a more efficient modeling technique with an acceptable error percentage.

Thermal Characterization of Interlayer Microfluidic Cooling of Three-Dimensional Integrated Circuits With Nonuniform Heat Flux

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Yoon Jo Kim ◽  
Yogendra K. Joshi ◽  
Andrei G. Fedorov ◽  
Young-Joon Lee ◽  
Sung-Kyu Lim
Keyword(s):  
Integrated Circuits ◽  
Mass Flow Rate ◽  
Thermal Management ◽  
Mass Flow ◽  
Flow Rate ◽  
Single Phase ◽  
Hot Spot ◽  
Three Dimensional ◽  
Two Phase ◽  
Two Phase Cooling

It is now widely recognized that the three-dimensional (3D) system integration is a key enabling technology to achieve the performance needs of future microprocessor integrated circuits (ICs). To provide modular thermal management in 3D-stacked ICs, the interlayer microfluidic cooling scheme is adopted and analyzed in this study focusing on a single cooling layer performance. The effects of cooling mode (single-phase versus phase-change) and stack/layer geometry on thermal management performance are quantitatively analyzed, and implications on the through-silicon-via scaling and electrical interconnect congestion are discussed. Also, the thermal and hydraulic performance of several two-phase refrigerants is discussed in comparison with single-phase cooling. The results show that the large internal pressure and the pumping pressure drop are significant limiting factors, along with significant mass flow rate maldistribution due to the presence of hot-spots. Nevertheless, two-phase cooling using R123 and R245ca refrigerants yields superior performance to single-phase cooling for the hot-spot fluxes approaching ∼300 W/cm2. In general, a hybrid cooling scheme with a dedicated approach to the hot-spot thermal management should greatly improve the two-phase cooling system performance and reliability by enabling a cooling-load-matched thermal design and by suppressing the mass flow rate maldistribution within the cooling layer.

Three-dimensional numerical model for open-channels with free-surface variations

2003 ◽  
Vol 41 (1) ◽  
pp. 110-112
Author(s):  
ZhixiaN. Cao ◽  
Rodney Day ◽  
Sarah Liriano
Keyword(s):  
Free Surface ◽  
Numerical Model ◽  
Three Dimensional ◽  
Open Channels
Sign in / Sign up

Export Citation Format

Share Document