INVESTIGATION OF PHYSICAL PROPERTIES OF WOOD FIBER SUBSTRATES UNDER PRESS POT CONDITIONS

2001 ◽  
pp. 51-58 ◽  
Author(s):  
N. Gruda ◽  
CH. Sippel ◽  
W.H. Schnitzler
2010 ◽  
Vol 118 (6) ◽  
pp. 3255-3259 ◽  
Author(s):  
Shabnam Sheshmani ◽  
Alireza Ashori ◽  
Yahya Hamzeh

2012 ◽  
Vol 40 (6) ◽  
pp. 406-417 ◽  
Author(s):  
Han-Min Park ◽  
Hwang-Sun Heo ◽  
Eun-Jong Sung ◽  
Kyeong-Han Nam ◽  
Jae-Seop Lim

HortScience ◽  
2013 ◽  
Vol 48 (6) ◽  
pp. 732-737 ◽  
Author(s):  
Stephanie A. Beeks ◽  
Michael R. Evans

The physical properties of new 15.2-cm plastic and comparably sized bioplastic, solid ricehull, slotted ricehull, paper, peat, dairy manure, wood fiber, rice straw, and coconut fiber containers were determined. Additionally, the physical properties of these containers were determined after being used to grow ‘Rainier Purple’ cyclamen (Cyclamen persicum L.) in ebb-and-flood benches for 15 weeks in a greenhouse environment. The punch strength of new coconut fiber containers was the highest of the containers. The used plastic containers had strengths of 228.0, 230.5, and 215.2 N for the bottom, middle, and top zones, respectively. The used peat, dairy manure, and wood fiber containers had strengths of less than 15 N for each zone. Tensile strength of all new containers was 10 kg. The plastic, bioplastic, solid ricehull, slotted ricehull, paper, and coconut fiber containers had used strengths that were similar to plastic containers. Total water used for wood fiber containers was higher than plastic containers. Irrigation intervals for plastic containers were similar to bioplastic, solid ricehull, slotted ricehull, paper, and coconut fiber containers. The irrigation interval for plastic containers was 1.32 days and the wood fiber container had the shortest irrigation interval at 0.61 day. Container absorption for coconut fiber containers was 255 mL and was higher than plastic containers. Wood fiber container absorption was 141 mL and lower than plastic containers. Plastic, bioplastic, solid ricehull, and slotted ricehull containers had no visible algal or fungal growth. The wood fiber containers had 79% of the container walls covered with algae or fungi and the bottom and middle zones had 100% algae or fungi coverage. The bottom zone of rice straw, dairy manure, and peat containers also had 100% algae or fungi coverage. The bioplastic, solid ricehull, and slotted ricehull containers in this study proved to be good substitutes for plastic containers. These containers retained high levels of punch and tensile strength, had no algal and fungal growth, and required a similar amount of solution as the plastic containers to grow a cyclamen crop. The peat, dairy manure, wood fiber, and rice straw containers proved not to be appropriate substitutes for plastic containers because of the low used strengths, high percentage of algal and fungal coverage, and shorter irrigation intervals as compared with plastic containers.


BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 8258-8272
Author(s):  
Yang Zhao ◽  
Qinpeng Shen ◽  
Yuanxin Duan ◽  
Shuyin Wu ◽  
Ping Lei ◽  
...  

Polylactic acid is a biodegradable thermoplastic polyester derived from renewable polysaccharides. In this work, softwood fibers were used to reinforce the paper sheet made from polylactic acid fibers, thus addressing the challenges regarding low density, rough surface, and weak strength. The impact of wood fibers and calendering on the physical properties (density, roughness, tensile strength, and folding endurance) of the composite paper were identified. Furthermore, the morphology of papers with different fiber contents and those that had been calendered was characterized with a scanning electron microscope. The use of wood fibers resulted in the improvement of the physical properties of the polylactic acid paper, and the enhanced refining of wood fibers had a favorable role in improving paper density, smoothness, and mechanical strength. The tensile index increased 37.9% when the beating degree of wood fibers increased from 25 to 60 °SR. After calendering, the density, smoothness, tensile strength, folding endurance, and air barrier property of the paper were improved 60.2%, 45.8%, 15.5%, 148.1%, and 79.4%, respectively. The calendering-based papermaking process involving the combined use of wood fibers and polylactic acid fibers would be a promising strategy for designing composite materials for tailorable end-uses.


1992 ◽  
Vol 266 ◽  
Author(s):  
Don H. White ◽  
S. C. Park

AbstractThe usefulness of solubility parameters in identifying miscible polymer blends is reviewed. The use of wood fibers in mixtures of recycled thermoplastics is of current interest. These composites do not require miscible blends of polymers, but must exhibit compatibility in order to have good adhesion and physical properties. The use of solubility parameters to design improved composites is cited. This approach is then applied to wood fiber/polyolefin thermoplastic composites.


Tehnika ◽  
2016 ◽  
Vol 71 (5) ◽  
pp. 659-662
Author(s):  
Srdjan Perisic ◽  
Milos Petrovic ◽  
Andjelika Bjelajac ◽  
Aleksandar Marinkovic ◽  
Dusica Stojanovic ◽  
...  

2016 ◽  
Vol 2 (02) ◽  
Author(s):  
Darono Wikanaji ◽  
Trismawati , ◽  
Pepi Kartiko

Research of virgin bagasse pulp and market bagasse pulp as the furnish for MG tissue 17 gsm, HVS paper 56 gsm, and BC paper 210 gsm has been done for NBKP and LBKP substitution. MG tissue was produced on PM 4th at 3,2% lower speed and 6,7% lower throughput is able to replace the whole LBKP portion (± 60%) with no negative effect on physical properties at all. The use of bagasse pulp up to 15% to substitute LBKP in the furnish of HVS produced on PM 5th. at 4,3% lower speed and 1% higher throughput is able to improve strength index, tensile index, and tear index, and reduces the porosity up to 800 ml/minute. Bagasse pulp for BC paper was produced on PM 2nd. at the same speed and throughput is able to replace some portion of LBKP (40 – 80%) and NBKP (10 - 20%) with apparently no negative effect on physical properties. But, properties of BC still on between the high and low level properties of BC available on the market, even though a sharp decrease of strength index, tear index and double fold has been found when compared to BC 210 gsm using 20 - 30% NBKP.Keywords: bagasse pulp, tensile index, strength index, tear index, porosity  ABSTRAK Penelitian pulp bagas virgin dan bagas pasaran sebagai bahan baku pembuatan kertas tisu gramatur 17 g/m2, kertas HVS 56 g/m2, dan karton BC 210 g/m2 dalam rangka substitusi serat LBKP dan NBKP telah dilakukan. Kertas tisu MG yang dibuat di PM4 pada kecepatan 3,2 % lebih rendah dan 6,7 % kapasitas lebih rendah ternyata mampu mensubstitusi seluruh porsi LBKP (60%) tanpa efek negatif pada sifat fisik kertas. Kertas HVS dibuat di PM5 pada kecepatan 4,3 % lebih rendah dan kapasitas 1 % lebih rendah ternyata mampu meningkatkan indeks kekuatan, indeks tarik, dan indeks sobek, serta mengurangi porositas hingga 800 ml/mnt. Karton BC dibuat di PM2 pada kecepatan dan kapasitas yang sama ternyata mampu mensubstitusi porsi LBKP (40 – 80 %) dan NBKP (10 – 20 %) tanpa pengaruh negatif pada sifat fisik. Tetapi sifat BC masih berada diantara batas bawah dan batas atas BC komersial, meskipun ada penurunan tajam pada indeks kekuatan dan ketahanan lipat dibandingkan dengan BC yang menggunakan 20 – 30 % NBKP.Kata kunci : pulp bagas, indeks tarik, indeks kekuatan, indeks sobek, porositas 


Sign in / Sign up

Export Citation Format

Share Document