scholarly journals Comprehensive Procedure of the Assessment of the Quality of Welded Joints Made in Alloy INCONEL 617

2018 ◽  
Vol 2018 (6) ◽  
pp. 35-44
Author(s):  
Natalia Konieczna
Keyword(s):  
Welded Joints ◽  
Inconel 617 ◽  
Made In

scholarly journals Introduction to the Examination of Thin-Walled Structures Using the Vibrodiagnostic Method

2019 ◽  
Vol 26 (4) ◽  
pp. 242-248
Author(s):  
Adam Szeleziński ◽  
Adam Muc ◽  
Lech Murawski ◽  
Do Van Doan
Keyword(s):  
Welded Joints ◽  
Geometrical Parameters ◽  
Construction Monitoring ◽  
Thin Walled Structures ◽  
Measurement Tools ◽  
Thin Walled ◽  
Non Destructive ◽  
Vibrodiagnostic Method ◽  
Made In

AbstractThe article presents a methodology of non-destructive diagnostic vibratory tests of welded plates with geometrical parameters that classify them into a group of thin-walled panels. On the basis of such plates, most ship constructions are created. In previous works, the authors dealt with the study of welded joints in plates with significant thicknesses and developed for them a number of methods for assessing the quality of welded joints. Vibrodiagnostics is a NDT method that allows the use of a variety of techniques and tools. It enables measurements to be made in both a contact and non-contact way depending on the requirements of the structure and the environment. Vibrodiagnostic method is one of the most modern NDT methods, which uses modern measurement tools and computer analysis of data. On the basis of the developed methods, the authors intend to verify their application to plates from real welded constructions, which will be performed in typical shipyard conditions by welders. Such tests are important due to their use for the construction of a real SHM ship construction monitoring system. These methods allow for the examination of the condition of ships’ structural plates and can detect defects in welded joints that prevent ships from operating under severe sea conditions. The article presents the laboratory stand, the sensor layout, results, and their initial analysis.

Evaluation of quality of welded joints of high-strength railway rails of modern production taking into account the requirements of ukrainian and european standards

2020 ◽  
Vol 2020 (7) ◽  
pp. 2-10
Author(s):  
S.I. Kuchuk-Yatsenko ◽  
◽  
E.V. Antipin ◽  
O.V. Didkovskyi ◽  
V.I. Shvets ◽  
...  
Keyword(s):  
Welded Joints ◽  
High Strength ◽  
European Standards

Reuse of Sludge from Pulp and Paper Industry Pilot and Full Scale Applications

1993 ◽  
Vol 28 (2) ◽  
pp. 17-26 ◽  
Author(s):  
V. Eroǧlu ◽  
A. M. Saatçi
Keyword(s):  
Economic Analysis ◽  
Paper Industry ◽  
Pulp And Paper Industry ◽  
Pulp And Paper ◽  
Full Scale ◽  
Primary Sludge ◽  
Recent Advances ◽  
Made In

Recent advances made in the reuse of pulp and paper industry sludges in hardboard production are explained. Data obtained from pilot and full-scale plants using primary sludge of a pulp and paper industry as an additive in the production of hardboard is presented. An economic analysis of the reuse of pulp and paper primary sludge in hardboard manufacturing is given. The quality of the hardboard produced is tested and compared with the qualities of the hardboard produced by the same plant before the addition of primary sludge. The hardboard with primary sludge additive has been used in Turkey for about a year in the manufacturing of office and home furniture. The results are very satisfactory when the primary sludge is used at 1/4 ratio.

scholarly journals Determination of Environmental Factors for the Implementation of the Exploitability Index in Industrial Aggregate Mining Using Multi-Criteria Analysis

2021 ◽  
Vol 10 (4) ◽  
pp. 196
Author(s):  
Julio Manuel de Luis-Ruiz ◽  
Benito Ramiro Salas-Menocal ◽  
Gema Fernández-Maroto ◽  
Rubén Pérez-Álvarez ◽  
Raúl Pereda-García
Keyword(s):  
Environmental Factors ◽  
Environmental Factor ◽  
Human Life ◽  
Accurate Estimation ◽  
Analytic Hierarchy ◽  
Main Components ◽  
Hierarchy Process ◽  
Made In

The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

scholarly journals Downregulation of exosomal let-7d and miR-16 in idiopathic pulmonary fibrosis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Donato Lacedonia ◽  
Giulia Scioscia ◽  
Piera Soccio ◽  
Massimo Conese ◽  
Lucia Catucci ◽  
...  
Keyword(s):  
Idiopathic Pulmonary Fibrosis ◽  
Pulmonary Fibrosis ◽  
Therapy Response ◽  
Down Regulation ◽  
Cross Sectional ◽  
Exosomal Mirnas ◽  
Different Types ◽  
Sectional Analysis ◽  
Made In

Abstract Background Idiopathic Pulmonary Fibrosis (IPF) is a degenerative interstitial lung disease with both a poor prognosis and quality of life once the diagnosis is made. In the last decade many features of the disease have been investigated to better understand the pathological steps that lead to the onset of the disease and, moreover, different types of biomarkers have been tested to find valid diagnostic, prognostic and therapy response predictive ones. In the complexity of IPF, microRNA (miRNAs) biomarker investigation seems to be promising. Methods We analysed the expression of five exosomal miRNAs supposed to have a role in the pathogenesis of the disease from serum of a group of IPF patients (n = 61) and we compared it with the expression of the same miRNAs in a group of healthy controls (n = 15). Results In the current study what emerged is let-7d down-regulation and, unexpectedly, miR-16 significant down-regulation. Moreover, through a cross-sectional analysis, a clustering of the expression of miR-16, miR-21 and miR-26a was found. Conclusions These findings could help the individuation of previously unknown key players in the pathophysiology of IPF and, most interestingly, more specific targets for the development of effective medications.

Arthroscopic International Cartilage Repair Society Classification System Has Only Moderate Reliability in a Porcine Cartilage Repair Model

2021 ◽  
pp. 036354652199800
Author(s):  
Jani Puhakka ◽  
Teemu Paatela ◽  
Eve Salonius ◽  
Virpi Muhonen ◽  
Anna Meller ◽  
...  
Keyword(s):  
Cartilage Repair ◽  
Scoring System ◽  
Femoral Condyle ◽  
Intraclass Correlation ◽  
Type Iii Collagen ◽  
Intrarater Reliability ◽  
Scoring Method ◽  
International Cartilage Repair Society ◽  
Made In

Background: The International Cartilage Repair Society (ICRS) score was designed for arthroscopic use to evaluate the quality of cartilage repair. Purpose: To evaluate the reliability of the ICRS scoring system using an animal cartilage repair model. Study Design: Controlled laboratory study. Methods: A chondral defect with an area of 1.5 cm2 was made in the medial femoral condyle of 18 domestic pigs. Five weeks later, 9 pigs were treated using a novel recombinant human type III collagen/polylactide scaffold, and 9 were left to heal spontaneously. After 4 months, the pigs were sacrificed, then 3 arthroscopic surgeons evaluated the medial femoral condyles via video-recorded simulated arthroscopy using the ICRS scoring system. The surgeons repeated the evaluation twice within a 9-month period using their recorded arthroscopy. Results: The porcine cartilage repair model produced cartilage repair tissue of poor to good quality. The mean ICRS total scores for all observations were 6.6 (SD, 2.6) in arthroscopy, 5.9 (SD, 2.7) in the first reevaluation, and 6.2 (SD, 2.8) in the second reevaluation. The interrater reliability with the intraclass correlation coefficient (ICC) for the ICRS total scores (ICC, 0.46-0.60) and for each individual subscore (ICC, 0.26-0.71) showed poor to moderate reliability. The intrarater reliability with the ICC also showed poor to moderate reliability for ICRS total scores (ICC, 0.52-0.59) and for each individual subscore (ICC, 0.29-0.58). A modified Bland-Altman plot for the initial arthroscopy and for the 2 reevaluations showed an evident disagreement among the observers. Conclusion: In an animal cartilage repair model, the ICRS scoring system seems to have poor to moderate reliability. Clinical Relevance: Arthroscopic assessment of cartilage repair using the ICRS scoring method has limited reliability. We need more objective methods with acceptable reliability to evaluate cartilage repair outcomes.

scholarly journals Learning As It Happens: A Decade of Analyzing and Shaping a Large-Scale Online Learning System

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Matthieu J. S. Brinkhuis ◽  
Alexander O. Savi ◽  
Abe D. Hofman ◽  
Frederik Coomans ◽  
Han L. J. Van der Maas ◽  
...  
Keyword(s):  
Online Learning ◽  
Large Scale ◽  
Response Times ◽  
Learning System ◽  
Learning Gains ◽  
Online Experimentation ◽  
Quality Of Fit ◽  
Item Reliability ◽  
Made In

With the advent of computers in education, and the ample availability of online learning and practice environments, enormous amounts of data on learning become available. The purpose of this paper is to present a decade of experience with analyzing and improving an online practice environment for math, which has thus far recorded over a billion responses. We present the methods we use to both steer and analyze this system in real-time, using scoring rules on accuracy and response times, a tailored rating system to provide both learners and items with current ability and difficulty ratings, and an adaptive engine that matches learners to items. Moreover, we explore the quality of fit by means of prediction accuracy and parallel item reliability. Limitations and pitfalls are discussed by diagnosing sources of misfit, like violations of unidimensionality and unforeseen dynamics. Finally, directions for development are discussed, including embedded learning analytics and a focus on online experimentation to evaluate both the system itself and the users’ learning gains. Though many challenges remain open, we believe that large steps have been made in providing methods to efficiently manage and research educational big data from a massive online learning system.

Human Factors Engineering Planning Aid

1987 ◽  
Vol 31 (3) ◽  
pp. 350-352
Author(s):  
Stephen C. Merriman
Keyword(s):  
Complex System ◽  
Human Factors ◽  
Human Factors Engineering ◽  
Planning Time ◽  
Acquisition Process ◽  
Engineering Program ◽  
System Acquisition ◽  
The Military ◽  
Made In

This paper describes the application of affordable program management software to the task of planning human factors programs conducted in support of complex system developments. A model of the military system acquisition process was developed and a model human factors engineering program was overlayed upon it. Interdependencies were created between the models so that changes made in the acquisition schedule would cause the human factors program to be automatically tailored. This approach has potential to reduce planning time and increase the quality of human factors plans.

Non-Destructive Identification of Defects in Power Support Structure Foundations by Means of Acoustic Techniques

2014 ◽  
Vol 606 ◽  
pp. 95-98
Author(s):  
Lukasz Sadowski
Keyword(s):  
Construction Industry ◽  
Support Structure ◽  
Air Voids ◽  
Impact Echo ◽  
Acoustic Techniques ◽  
Location Depth ◽  
Concrete Elements ◽  
Non Destructive ◽  
Made In

Prefabricated power support structure foundations are made in prefabrication plants where concrete is laid in layers in moulds. The quality of the prefabricated units depends mainly on proper concrete mixture compaction, which is usually effected by means of immersion vibrators. It happens that when the vibrator is withdrawn too quickly, defects, in the form of, e.g., air voids and zones of insufficiently vibrated concrete, appear. Modern non-destructive acoustic techniques, which in recent years have been increasingly commonly used in the construction industry, are highly suitable for testing concrete elements, particularly prefabricated concrete units. The non-destructive impact-echo technique is particularly useful for determining defect location depth and for locating defective areas.

Sign in / Sign up

Export Citation Format

Share Document