Comparison and Combination of GNSS and Strong-Motion Observations: A Case Study of the 2016 Mw 7.0 Kumamoto Earthquake

2020 ◽  
Vol 110 (6) ◽  
pp. 2647-2660
Author(s):  
Nikolaj Dahmen ◽  
Roland Hohensinn ◽  
John Clinton
Keyword(s):  
Real Time ◽  
Inertial Sensors ◽  
Strong Motion ◽  
Global Navigation Satellite Systems ◽  
Sensor Data ◽  
Motion Sensors ◽  
Frequency Range ◽  
Kumamoto Earthquake ◽  
Long Period

ABSTRACT The 2016 Mw 7.0 Kumamoto earthquake resulted in exceptional datasets of Global Navigation Satellite Systems (GNSS) and seismic data. We explore the spatial similarity of the signals and investigate procedures for combining collocated sensor data. GNSS enables the direct observation of the long-period ground displacements, limited by noise levels in regimes of millimeters to several centimeters. Strong-motion accelerometers are inertial sensors and therefore optimally resolve middle- to high-frequency strong ground motion. The double integration from acceleration to displacement amplifies long-period errors introduced by tilt, rotation, noise, and nonlinear instrument responses and can lead to large nonphysical drifts. For the case study of the Kumamoto earthquake, 39 GNSS stations (1  samples/s) with nearby located strong-motion accelerometers (100  samples/s) are investigated. The GNSS waveforms obtained by precise point positioning under real-time conditions prove to be very similar to the postprocessed result. Real-time GNSS and nearby located accelerometers show consistent observations for periods between ∼3–5 and ∼50–100  s. The matching frequency range is defined by the long-period noise of the accelerometer and the low signal-to-noise ratio (SNR) of GNSS, when it comes to small displacements close to its noise level. Current procedures in fusing the data with a Kalman filter are verified for the dataset of this event. Combined data result in a very broadband waveform that covers the optimal frequency range of each sensor. We explore how to integrate fused processing in a real-time network, including event detection and magnitude estimation. Carrying out a statistical test on the GNSS records allows us to identify seismic events and sort out stations with a low SNR, which would otherwise impair the quality of downstream products. The results of this study reinforce the emerging consensus that there is real benefit to collocation GNSS and strong-motion sensors for the monitoring of moderate-to-large earthquakes.

scholarly journals DOLARS, a Distributed On-Line Activity Recognition System by Means of Heterogeneous Sensors in Real-Life Deployments—A Case Study in the Smart Lab of The University of Almería

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 405
Author(s):  
Marcos Lupión ◽  
Javier Medina-Quero ◽  
Juan F. Sanjuan ◽  
Pilar M. Ortigosa
Keyword(s):  
Real Time ◽  
Activity Recognition ◽  
Real Life ◽  
Recognition System ◽  
Machine Learning Algorithms ◽  
Sensor Data ◽  
Heterogeneous Sensors ◽  
On Line ◽  
The University

Activity Recognition (AR) is an active research topic focused on detecting human actions and behaviours in smart environments. In this work, we present the on-line activity recognition platform DOLARS (Distributed On-line Activity Recognition System) where data from heterogeneous sensors are evaluated in real time, including binary, wearable and location sensors. Different descriptors and metrics from the heterogeneous sensor data are integrated in a common feature vector whose extraction is developed by a sliding window approach under real-time conditions. DOLARS provides a distributed architecture where: (i) stages for processing data in AR are deployed in distributed nodes, (ii) temporal cache modules compute metrics which aggregate sensor data for computing feature vectors in an efficient way; (iii) publish-subscribe models are integrated both to spread data from sensors and orchestrate the nodes (communication and replication) for computing AR and (iv) machine learning algorithms are used to classify and recognize the activities. A successful case study of daily activities recognition developed in the Smart Lab of The University of Almería (UAL) is presented in this paper. Results present an encouraging performance in recognition of sequences of activities and show the need for distributed architectures to achieve real time recognition.

Innovative real-time sensing of flow dynamics in groundwater and sediments to map contaminant spreading

2021 ◽  
Author(s):  
Goedele Verreydt ◽  
Niels Van Putte ◽  
Timothy De Kleyn ◽  
Joris Cool ◽  
Bino Maiheu
Keyword(s):  
Surface Water ◽  
Groundwater Flow ◽  
Real Time ◽  
Flow Direction ◽  
Flow Dynamics ◽  
Sensor Data ◽  
Time Data ◽  
Mass Fluxes ◽  
First Case

<p>Groundwater dynamics play a crucial role in the spreading of a soil and groundwater contamination. However, there is still a big gap in the understanding of the groundwater flow dynamics. Heterogeneities and dynamics are often underestimated and therefore not taken into account. They are of crucial input for successful management and remediation measures. The bulk of the mass of mass often is transported through only a small layer or section within the aquifer and is in cases of seepage into surface water very dependent to rainfall and occurring tidal effects.</p><p> </p><p>This study contains the use of novel real-time iFLUX sensors to map the groundwater flow dynamics over time. The sensors provide real-time data on groundwater flow rate and flow direction. The sensor probes consist of multiple bidirectional flow sensors that are superimposed. The probes can be installed directly in the subsoil, riverbed or monitoring well. The measurement setup is unique as it can perform measurements every second, ideal to map rapid changing flow conditions. The measurement range is between 0,5 and 500 cm per day.</p><p> </p><p>We will present the measurement principles and technical aspects of the sensor, together with two case studies.</p><p> </p><p>The first case study comprises the installation of iFLUX sensors in 4 different monitoring wells in a chlorinated solvent plume to map on the one hand the flow patterns in the plume, and on the other hand the flow dynamics that are influenced by the nearby popular trees. The foreseen remediation concept here is phytoremediation. The sensors were installed for a period of in total 4 weeks. Measurement frequency was 5 minutes. The flow profiles and time series will be presented together with the determined mass fluxes.</p><p> </p><p>A second case study was performed on behalf of the remediation of a canal riverbed. Due to industrial production of tar and carbon black in the past, the soil and groundwater next to the small canal ‘De Lieve’ in Ghent, Belgium, got contaminated with aliphatic and (poly)aromatic hydrocarbons. The groundwater contaminants migrate to the canal, impact the surface water quality and cause an ecological risk. The seepage flow and mass fluxes of contaminants into the surface water were measured with the novel iFLUX streambed sensors, installed directly in the river sediment. A site conceptual model was drawn and dimensioned based on the sensor data. The remediation concept to tackle the inflowing pollution: a hydraulic conductive reactive mat on the riverbed that makes use of the natural draining function of the waterbody, the adsorption capacity of a natural or secondary adsorbent and a future habitat for micro-organisms that biodegrade contaminants. The reactive mats were successfully installed and based on the mass flux calculations a lifespan of at least 10 years is expected for the adsorption material.  </p>

Dynamic Data-Driven Spatiotemporal System Behavior Prediction With Simulations and Sensor Measurement Data

2018 ◽  
Author(s):  
Xiangxue Zhao ◽  
Shapour Azarm ◽  
Balakumar Balachandran
Keyword(s):  
Dynamical System ◽  
Real Time ◽  
Measurement Data ◽  
Data Driven ◽  
Sensor Data ◽  
Model Parameters ◽  
High Fidelity ◽  
System Behavior ◽  
Sensor Measurement

Online prediction of dynamical system behavior based on a combination of simulation data and sensor measurement data has numerous applications. Examples include predicting safe flight configurations, forecasting storms and wildfire spread, estimating railway track and pipeline health conditions. In such applications, high-fidelity simulations may be used to accurately predict a system’s dynamical behavior offline (“non-real time”). However, due to the computational expense, these simulations have limited usage for online (“real-time”) prediction of a system’s behavior. To remedy this, one possible approach is to allocate a significant portion of the computational effort to obtain data through offline simulations. The obtained offline data can then be combined with online sensor measurements for online estimation of the system’s behavior with comparable accuracy as the off-line, high-fidelity simulation. The main contribution of this paper is in the construction of a fast data-driven spatiotemporal prediction framework that can be used to estimate general parametric dynamical system behavior. This is achieved through three steps. First, high-order singular value decomposition is applied to map high-dimensional offline simulation datasets into a subspace. Second, Gaussian processes are constructed to approximate model parameters in the subspace. Finally, reduced-order particle filtering is used to assimilate sparsely located sensor data to further improve the prediction. The effectiveness of the proposed approach is demonstrated through a case study. In this case study, aeroelastic response data obtained for an aircraft through simulations is integrated with measurement data obtained from a few sparsely located sensors. Through this case study, the authors show that along with dynamic enhancement of the state estimates, one can also realize a reduction in uncertainty of the estimates.

A Case Study of Embedding Real-time Infrastructure Sensor Data to BIM

2014 ◽  
Author(s):  
Jianli Chen ◽  
Tanyel Bulbul ◽  
John E. Taylor ◽  
Guney Olgun
Keyword(s):  
Real Time ◽  
Sensor Data

Use of Real-Time Rig-Sensor Data To Improve Daily Drilling Reporting, Benchmarking, and Planning—A Case Study

2007 ◽  
Vol 22 (03) ◽  
pp. 217-226 ◽  
Author(s):  
Wolfgang Mathis ◽  
Gerhard Thonhauser ◽  
Gerhard Wallnoefer ◽  
Johannes Ettl
Keyword(s):  
Real Time ◽  
Sensor Data

scholarly journals Real-Time GNSS-Derived PWV for Typhoon Characterizations: A Case Study for Super Typhoon Mangkhut in Hong Kong

2019 ◽  
Vol 12 (1) ◽  
pp. 104 ◽  
Author(s):  
Qimin He ◽  
Kefei Zhang ◽  
Suqin Wu ◽  
Qingzhi Zhao ◽  
Xiaoming Wang ◽  
...  
Keyword(s):  
Time Series ◽  
Hong Kong ◽  
Water Vapor ◽  
Wind Speed ◽  
Real Time ◽  
Global Navigation Satellite Systems ◽  
International Gnss Service ◽  
China Meteorological Administration ◽  
Super Typhoon

Typhoons can be serious natural disasters for the sustainability and development of society. The development of a typhoon usually involves a pre-existing weather disturbance, warm tropical oceans, and a large amount of moisture. This implies that a large variation in the atmospheric water vapor over the path of a typhoon can be used to study the characteristics of the typhoon. This is the reason that the variation in precipitable water vapor (PWV) is often used to capture the signature of a typhoon in meteorology. This study investigates the usability of real-time PWV retrieved from global navigation satellite systems (GNSS) for typhoons’ characterizations, and especially, the following aspects were investigated: (1) The correlation between PWV and atmospheric parameters including pressure, temperature, precipitation, and wind speed; (2) water vapor transportation during a typhoon period; and (3) the correlation between the movement of a typhoon and the transportation of water vapor. The case study selected for this research was Super Typhoon Mangkhut that occurred in mid-September 2018 in Hong Kong. The PWV time series were obtained from a conversion of GNSS-derived zenith total delays (ZTDs) using observations at 10 stations selected from the Hong Kong GNSS continuously operating reference stations (CORS) network, which are also located along the path of the typhoon. The Bernese GNSS Software (ver. 5.2) was used to obtain the ZTDs; and the root mean square (RMS) of the differences between the GNSS-ZTDs and International GNSS Service post-processed ZTDs time series was less than 8 mm. The RMS of the differences between the GNSS-PWVs (i.e., the ZTDs converted PWVs) and radiosonde-derived PWVs (RS-PWVs) time series was less than 2 mm. The changes in PWV reflect the variation in wind speed during the typhoon period to a certain degree, and their correlation coefficient was 0.76, meaning a significant positive correlation. In addition, a new approach was proposed to estimate the direction and speed of a typhoon’s movement using the time difference of PWV arrival at different sites. The direction and speed estimated agreed well with the ones published by the China Meteorological Administration. These results suggest that GNSS-derived PWV has a great potential for the monitoring and even prediction of typhoon events, especially for near real-time warnings.

scholarly journals Real-time Smartphone Activity Classification Using Inertial Sensors—Recognition of Scrolling, Typing, and Watching Videos While Sitting or Walking

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 655 ◽  
Author(s):  
Sijie Zhuo ◽  
Lucas Sherlock ◽  
Gillian Dobbie ◽  
Yun Sing Koh ◽  
Giovanni Russello ◽  
...  
Keyword(s):  
Real Time ◽  
Inertial Sensors ◽  
Optimal Solution ◽  
Sensor Data ◽  
Measurement Unit ◽  
Time Activity ◽  
Motion Data ◽  
Android App ◽  
Human Participants ◽  
Access Policies

By developing awareness of smartphone activities that the user is performing on their smartphone, such as scrolling feeds, typing and watching videos, we can develop application features that are beneficial to the users, such as personalization. It is currently not possible to access real-time smartphone activities directly, due to standard smartphone privileges and if internal movement sensors can detect them, there may be implications for access policies. Our research seeks to understand whether the sensor data from existing smartphone inertial measurement unit (IMU) sensors (triaxial accelerometers, gyroscopes and magnetometers) can be used to classify typical human smartphone activities. We designed and conducted a study with human participants which uses an Android app to collect motion data during scrolling, typing and watching videos, while walking or seated and the baseline of smartphone non-use, while sitting and walking. We then trained a machine learning (ML) model to perform real-time activity recognition of those eight states. We investigated various algorithms and parameters for the best accuracy. Our optimal solution achieved an accuracy of 78.6% with the Extremely Randomized Trees algorithm, data sampled at 50 Hz and 5-s windows. We conclude by discussing the viability of using IMU sensors to recognize common smartphone activities.

Sign in / Sign up

Export Citation Format

Share Document