Hydrodynamic experiments with rigid cylindrical tanks subjected to transient motions*

1951 ◽  
Vol 41 (4) ◽  
pp. 313-346
Author(s):  
Lydik S. Jacobsen ◽  
Robert S. Ayre
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Vertical Plane ◽  
Storage Tanks ◽  
Direction Parallel ◽  
Fluid Damping ◽  
Hydrodynamic Experiments ◽  
Wave Heights ◽  
Equivalent Mass ◽  
Cylindrical Tanks

Abstract Four tanks, from 6 inches to 4 feet in diameter, have been subjected simultaneously to transient, horizontal “ground motions” of simplified type. The important parameters, in addition to size of tank, were depth of fluid and frequency, duration, and amplitude of ground motion. The envelopes of the gravity-wave profiles have been recorded on a vertical plane of symmetry placed within each tank in a direction parallel to the ground motion. The data include samples of the wave envelopes, photographic studies of the wave formation, maximum wave heights and the locations of these maxima, and the fluid damping coefficients. Equivalent mass and overturning moment due to the fluid have been shown for various degrees of confinement of the upper surface, from complete confinement (owing to use of a rigid cover) to a free surface. The study relates to the effect of earthquakes and other ground motions on oil and water storage tanks. The results can be extrapolated with reasonable certainty to full-scale tanks.

Liquid Sloshing of Oil Storage Tanks and Long-Period Strong Ground Motions in the 2003 Tokachi-Oki Earthquake

2004 ◽  
Author(s):  
Shinsaku Zama
Keyword(s):  
Seismic Waves ◽  
Ground Motions ◽  
Liquid Sloshing ◽  
Response Analysis ◽  
Storage Tanks ◽  
Severe Damage ◽  
Long Period ◽  
Oil Storage ◽  
Wave Heights ◽  
Strong Ground

The 2003 Tokachi-oki earthquake caused the severe damage to oil storage tanks by liquid sloshing. Especially at Tomakomai, two tank fires broke out and six floating roofs sank. Seismograms showed that long-period motions were predominant and duration became longer when the seismic waves propagated into the Yufutsu Plain, where Tomakomai is located. Sloshing wave heights (Wh) of all tanks were calculated by two-dimensional response analysis. It was found that estimated Wh exceeded 3 m at periods 5 and 7.5 sec, and exceeded 2m from 3.5 to 9 sec of sloshing period and that severe damaged tanks had the highest Wh at each period in general.

A subset of CyberShake ground-motion time series for response-history analysis

2021 ◽  
pp. 875529302098197
Author(s):  
Jack W Baker ◽  
Sanaz Rezaeian ◽  
Christine A Goulet ◽  
Nicolas Luco ◽  
Ganyu Teng
Keyword(s):  
Time Series ◽  
Los Angeles ◽  
Seismic Hazard ◽  
Ground Motion ◽  
Ground Motions ◽  
Response Spectra ◽  
Motion Time ◽  
History Analysis ◽  
Response History Analysis ◽  
Simulated Ground Motions

This manuscript describes a subset of CyberShake numerically simulated ground motions that were selected and vetted for use in engineering response-history analyses. Ground motions were selected that have seismological properties and response spectra representative of conditions in the Los Angeles area, based on disaggregation of seismic hazard. Ground motions were selected from millions of available time series and were reviewed to confirm their suitability for response-history analysis. The processes used to select the time series, the characteristics of the resulting data, and the provided documentation are described in this article. The resulting data and documentation are available electronically.

Ground-motion model for subduction earthquakes in northern South America

2021 ◽  
pp. 875529302110275
Author(s):  
Carlos A Arteta ◽  
Cesar A Pajaro ◽  
Vicente Mercado ◽  
Julián Montejo ◽  
Mónica Arcila ◽  
...  
Keyword(s):  
South America ◽  
Ground Motion ◽  
Ground Motions ◽  
Strong Motion ◽  
Motion Prediction ◽  
Depth Range ◽  
Ground Motion Prediction ◽  
Natural Period ◽  
Nazca Plate ◽  
Northern South America

Subduction ground motions in northern South America are about a factor of 2 smaller than the ground motions for similar events in other regions. Nevertheless, historical and recent large-interface and intermediate-depth slab earthquakes of moment magnitudes Mw = 7.8 (Ecuador, 2016) and 7.2 (Colombia, 2012) evidenced the vast potential damage that vulnerable populations close to earthquake epicenters could experience. This article proposes a new empirical ground-motion prediction model for subduction events in northern South America, a regionalization of the global AG2020 ground-motion prediction equations. An updated ground-motion database curated by the Colombian Geological Survey is employed. It comprises recordings from earthquakes associated with the subduction of the Nazca plate gathered by the National Strong Motion Network in Colombia and by the Institute of Geophysics at Escuela Politécnica Nacional in Ecuador. The regional terms of our model are estimated with 539 records from 60 subduction events in Colombia and Ecuador with epicenters in the range of −0.6° to 7.6°N and 75.5° to 79.6°W, with Mw≥4.5, hypocentral depth range of 4 ≤  Zhypo ≤ 210 km, for distances up to 350 km. The model includes forearc and backarc terms to account for larger attenuation at backarc sites for slab events and site categorization based on natural period. The proposed model corrects the median AG2020 global model to better account for the larger attenuation of local ground motions and includes a partially non-ergodic variance model.

Site effects of the Denis-Perron dam (SM-3): A case study in Eastern North America

2021 ◽  
pp. 875529302110194
Author(s):  
Daniel Verret ◽  
Denis LeBœuf ◽  
Éric Péloquin
Keyword(s):  
North America ◽  
Ground Motion ◽  
Site Effects ◽  
Transfer Functions ◽  
Ground Motions ◽  
Published Data ◽  
Eastern North America ◽  
Ground Acceleration ◽  
Large Dams ◽  
Moderate Seismicity

Eastern North America (ENA) is part of a region with low-to-moderate seismicity; nonetheless, some significant seismic events have occurred in the last few decades. Recent events have reemphasized the need to review ENA seismicity and ground motion models, along with continually reevaluating and updating procedures related to the seismic safety assessment of hydroelectric infrastructures, particularly large dams in Québec. Furthermore, recent researchers have shown that site-specific characteristics, topography, and valley shapes may significantly aggravate the severity of ground motions. To the best of our knowledge, very few instrumental data from actual earthquakes have been published for examining the site effects of hydroelectric dam structures located in eastern Canada. This article presents an analysis of three small earthquakes that occurred in 1999 and 2002 at the Denis-Perron (SM-3) dam. This dam, the highest in Québec, is a rockfill embankment structure with a height of 171 m and a length of 378 m; it is located in a narrow valley. The ground motion datasets of these earthquakes include the bedrock and dam crest three-component accelerometer recordings. Ground motions are analyzed both in the time and frequency domains. The spectral ratios and transfer functions obtained from these small earthquakes provide new insights into the directionality of resonant frequencies, vibration modes, and site effects for the Denis-Perron dam. The crest amplifications observed for this dam are also compared with previously published data for large dams. New statistical relationships are proposed to establish dam crest amplification on the basis of the peak ground acceleration (PGA) at the foundation.

scholarly journals Ground motions in urban Los Angeles from the 2019 Ridgecrest earthquake sequence

2021 ◽  
pp. 875529302110039
Author(s):  
Filippos Filippitzis ◽  
Monica D Kohler ◽  
Thomas H Heaton ◽  
Robert W Graves ◽  
Robert W Clayton ◽  
...  
Keyword(s):  
Los Angeles ◽  
Ground Motion ◽  
Ground Motions ◽  
Earthquake Sequence ◽  
Motion Prediction ◽  
Ground Motion Prediction Equations ◽  
Prediction Equations ◽  
Ground Motion Prediction ◽  
Velocity Models ◽  
Spectral Accelerations

We study ground-motion response in urban Los Angeles during the two largest events (M7.1 and M6.4) of the 2019 Ridgecrest earthquake sequence using recordings from multiple regional seismic networks as well as a subset of 350 stations from the much denser Community Seismic Network. In the first part of our study, we examine the observed response spectral (pseudo) accelerations for a selection of periods of engineering significance (1, 3, 6, and 8 s). Significant ground-motion amplification is present and reproducible between the two events. For the longer periods, coherent spectral acceleration patterns are visible throughout the Los Angeles Basin, while for the shorter periods, the motions are less spatially coherent. However, coherence is still observable at smaller length scales due to the high spatial density of the measurements. Examining possible correlations of the computed response spectral accelerations with basement depth and Vs30, we find the correlations to be stronger for the longer periods. In the second part of the study, we test the performance of two state-of-the-art methods for estimating ground motions for the largest event of the Ridgecrest earthquake sequence, namely three-dimensional (3D) finite-difference simulations and ground motion prediction equations. For the simulations, we are interested in the performance of the two Southern California Earthquake Center 3D community velocity models (CVM-S and CVM-H). For the ground motion prediction equations, we consider four of the 2014 Next Generation Attenuation-West2 Project equations. For some cases, the methods match the observations reasonably well; however, neither approach is able to reproduce the specific locations of the maximum response spectral accelerations or match the details of the observed amplification patterns.

scholarly journals Challenges in Evaluating Seismic Collapse Risk for RC Buildings

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Jin Zhou ◽  
Zhelun Zhang ◽  
Tessa Williams ◽  
Sashi K. Kunnath
Keyword(s):  
Ground Motion ◽  
Seismic Vulnerability ◽  
Ground Motions ◽  
Primary System ◽  
Fragility Functions ◽  
Reinforced Concrete Frame ◽  
Ground Motion Selection ◽  
Concrete Frame ◽  
Frame Building ◽  
Seismic Collapse

AbstractThe development of fragility functions that express the probability of collapse of a building as a function of some ground motion intensity measure is an effective tool to assess seismic vulnerability of structures. However, a number of factors ranging from ground motion selection to modeling decisions can influence the quantification of collapse probability. A methodical investigation was carried out to examine the effects of component modeling and ground motion selection in establishing demand and collapse risk of a typical reinforced concrete frame building. The primary system considered in this study is a modern 6-story RC moment frame building that was designed to current code provisions in a seismically active region. Both concentrated and distributed plasticity beam–column elements were used to model the building frame and several options were considered in constitutive modeling for both options. Incremental dynamic analyses (IDA) were carried out using two suites of ground motions—the first set comprised site-dependent ground motions, while the second set was a compilation of hazard-consistent motions using the conditional scenario spectra approach. Findings from the study highlight the influence of modeling decisions and ground motion selection in the development of seismic collapse fragility functions and the characterization of risk for various demand levels.

scholarly journals Simulation of non-stationary stochastic ground motions based on recent Italian earthquakes

2021 ◽  
Author(s):  
Fabio Sabetta ◽  
Antonio Pugliese ◽  
Gabriele Fiorentino ◽  
Giovanni Lanzano ◽  
Lucia Luzi
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Strong Motion ◽  
Stochastic Simulations ◽  
Model Parameters ◽  
Motion Model ◽  
Arias Intensity ◽  
Time Frequency ◽  
Ground Motion Model ◽  
Ground Motion Records

AbstractThis work presents an up-to-date model for the simulation of non-stationary ground motions, including several novelties compared to the original study of Sabetta and Pugliese (Bull Seism Soc Am 86:337–352, 1996). The selection of the input motion in the framework of earthquake engineering has become progressively more important with the growing use of nonlinear dynamic analyses. Regardless of the increasing availability of large strong motion databases, ground motion records are not always available for a given earthquake scenario and site condition, requiring the adoption of simulated time series. Among the different techniques for the generation of ground motion records, we focused on the methods based on stochastic simulations, considering the time- frequency decomposition of the seismic ground motion. We updated the non-stationary stochastic model initially developed in Sabetta and Pugliese (Bull Seism Soc Am 86:337–352, 1996) and later modified by Pousse et al. (Bull Seism Soc Am 96:2103–2117, 2006) and Laurendeau et al. (Nonstationary stochastic simulation of strong ground-motion time histories: application to the Japanese database. 15 WCEE Lisbon, 2012). The model is based on the S-transform that implicitly considers both the amplitude and frequency modulation. The four model parameters required for the simulation are: Arias intensity, significant duration, central frequency, and frequency bandwidth. They were obtained from an empirical ground motion model calibrated using the accelerometric records included in the updated Italian strong-motion database ITACA. The simulated accelerograms show a good match with the ground motion model prediction of several amplitude and frequency measures, such as Arias intensity, peak acceleration, peak velocity, Fourier spectra, and response spectra.

scholarly journals Simulation of response spectrum-compatible ground motions using wavelet-based multi-resolution analysis

2021 ◽  
pp. 002029402110130
Author(s):  
Guan Chen ◽  
Zhiren Zhu ◽  
Jun Hu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Ground Motions ◽  
Power Spectra ◽  
Simulation Method ◽  
Eurocode 8 ◽  
Effective Response ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Simulated Ground Motions

This study proposed a simple and effective response spectrum-compatible ground motions simulation method to mitigate the scarcity of ground motions on seismic hazard analysis base on wavelet-based multi-resolution analysis. The feasibility of the proposed method is illustrated with two recorded ground motions in El Mayor-Cucapah earthquake. The results show that the proposed method enriches the ground motions exponentially. The simulated ground motions agree well with the attenuation characteristics of seismic ground motion without modulating process. Moreover, the pseudo-acceleration response spectrum error between the recorded ground motion and the average of the simulated ground motions is 5.2%, which fulfills the requirement prescribed in Eurocode 8 for artificially simulated ground motions. Besides, the cumulative power spectra between the simulated and recorded ground motions agree well on both high- and low-frequency regions. Therefore, the proposed method offers a feasible alternative in enriching response spectrum-compatible ground motions, especially on the regions with insufficient ground motions.

Proposed methodology for estimating the magnitude at which subduction megathrust ground motions and source dimensions exhibit a break in magnitude scaling: Example for 79 global subduction zones

2020 ◽  
Vol 36 (3) ◽  
pp. 1271-1297
Author(s):  
Kenneth W. Campbell
Keyword(s):  
Ground Motion ◽  
Subduction Zones ◽  
Ground Motions ◽  
Seismic Source ◽  
Scaling Relations ◽  
Megathrust Earthquakes ◽  
Source Dimensions ◽  
Magnitude Scaling ◽  
Aspect Ratios ◽  
Source Scaling

In this article, I propose a method for estimating the magnitude [Formula: see text] at which subduction megathrust earthquakes are expected to exhibit a break in magnitude scaling of both seismic source dimensions and earthquake ground motions. The methodology is demonstrated by applying it to 79 global subduction zones defined in the literature, including Cascadia. Breakpoint magnitude is estimated from seismogenic interface widths, empirical source scaling relations, and aspect ratios of physically unbounded earthquake ruptures and their uncertainties. The concept stems from the well-established observation that source-dimension and ground motion scaling decreases for shallow continental (primarily strike-slip) earthquakes when rupture exceeds the seismogenic width of the fault. Although a scaling break for megathrust earthquakes is difficult to observe empirically, all of the instrumentally recorded historical [Formula: see text] mega-earthquakes have occurred on subduction zones with [Formula: see text] (8.1–8.9), consistent with an observed break in source scaling relations derived from these same events. The breakpoint magnitudes derived in this study can be used to constrain the magnitude at which the scaling of ground motion is expected to decrease in subduction ground motion prediction equations.

Sign in / Sign up

Export Citation Format

Share Document