scholarly journals Karakteristik Pengeringan Biji Jagung (Zea Mays L.) Menggunakan Alat Pengering Surya Adriyarkara Termodifikasi

2018 ◽  
Vol 3 (2) ◽  
pp. 351-360
Author(s):  
Athul Fadhli ◽  
Diswandi Nurba ◽  
Raida Agustina
Keyword(s):  
Zea Mays ◽  
Relative Humidity ◽  
Moisture Content ◽  
Zea Mays L ◽  
Initial Moisture Content ◽  
Solar Irradiation ◽  
Air Velocity ◽  
Drying Time ◽  
Average Temperature ◽  
Average Relative Humidity

Abstrak. Jagung merupakan tanaman penghasil karbohidrat terpenting. Pengeringan jagung pipil menggunakan alat pengering merupakan proses untuk menghasilkan jagung pipil yang siap diolah untuk pembuatan tepung jagung dengan batas kadar air tertentu sehingga menghaslkan jagung pipil dengan kualitas yang baik. Tujuan penelitian ini adalah untuk mengkaji karakteristik pengeringan biji jagung menggunakan alat pengering surya Termodifikasi. Metode penelitian  menggunakan 3,15 kilogram jagung pipil dengan kadar air awal 22% untuk proses pengeringan. Parameter yang dianalisis terkait alat pengering kolektor surya yaitu temperatur, kelembaban relatif, kecepatan udara dan iradiasi surya, sedangkan parameter yang dianalisis terkait bahan yaitu kadar air, lama waktu pengeringan, laju pengeringan dan organoleptik. Prosedur penelitian terdiri dari pengujian kosong dan pengujian dengan menggunakan jagung pipil. Hasil penelitian menunjukkan bahwa temperatur rata-rata dalam rak pengering sebelum dilakukan modifikasi yaitu 44,4oC, temperatur rata-rata setelah dilakukan modifikasi yaitu 55,5oC dan temperatur rata-rata rak pengering pada pengeringan menggunakan jagung pipil yaitu 46,96oC. Kelembaban relatif rata-rata dalam rak pengering sebelum dilakukan modifikasi yaitu 40,1%, kelembaban relatif rata-rata dalam rak pengering setelah modifikasi yaitu 35,1% dan kelembaban relatif rata-rata pengeringan menggunakan jagung pipil yaitu 44,45%. Dari hasil pengukuran tersebut menunjukkan bahwa nilai temperatur dan kelembaban pada alat setelah modifikasi lebih baik dibandingkan sebelum alat dimodifikasi. Pengukuran temperatur dan kelembaban relatif terdiri dari 4 titik pengukuran yaitu rak 1A,1B dan rak 2A, 2B. Kecepatan udara rata-rata yang diukur konstan yaitu 0,7 m/s pada ruang pengering, sedangkan lingkungan 1,1 m/s. Total iradiasi surya selama pengeringan yaitu 1848,84 W/m2. Kadar air jagung pipil masing-masing rak yaitu rak 1A 14,29%, rak 1B 14,47%, rak 2A 13,91% dan rak 2B 14,1%. Hasil dari pengujian organoleptik, panelis agak menyukai jagung pipil yang dikeringkan menggunakan alat pengering tersebut.Characteristics of Seed Drying (Zea mays L.) Using a Modified Adriyarkara Solar DryerAbstract. Corn is the most important carbohydrate plant. Drying corn using a drying tool is a process to produce corn that are ready to be processed for making corn flour with a certain water content limit so as to produce corn with good quality. The purpose of this study was to examine the characteristics of drying of corn kernels using a modified solar dryer. The research method used 3,15 kilogram of corn milled with the initial moisture content of 22% for drying process. The parameters analyzed in relation to solar collector dryers are temperature, relative humidity, air velocity and solar irradiation, while the parameters analyzed are materials such as moisture content, drying time, drying rate and organoleptic. The research procedure consists of unloaded testing and testing using corn. The results showed that the average temperature in the dryer tray before modification was 44,4°C, the average temperature after modification was 55,5°C and the average temperature of the dryer tray on drying using corn was 46,96oC. The average relative humidity in the dryer tray before modification is 40,1%, the average relative humidity in the dryer tray after modification is 35,1% and the average relative humidity of drying using corn is 44,45%. From the measurement results show that the value of temperature and humidity in the tool after modification is better than before. Measurement of temperature and relative humidity consist of 4 point of measurement that is tray 1A, 1B and tray 2A, 2B. Average mean air velocity measured is 0,7 m/s at the dryer room, while the environment is 1,1 m/s. Total solar irradiation during drying is 1848,84 W/m2. Moisture level of corn each shelves tray 1A is 14,29%, tray 1B is 14.47%, tray 2A is 13,91% and tray 2B is 14,1%. As a result of organoleptic testing, panelists rather like dried corn using the dryer.

scholarly journals Karakteristik Pengeringan Biji Pala (Myristica fragranshoutt) Menggunakan Alat Pengering Hybrid dengan Sumber Panas Dari energi Surya dan Serbuk Kayu

2018 ◽  
Vol 3 (4) ◽  
pp. 849-858
Author(s):  
Debi Sarnadi ◽  
Raida Agustina ◽  
Rita Khathir
Keyword(s):  
Relative Humidity ◽  
Solar Irradiation ◽  
Heat Sources ◽  
Drying Method ◽  
Drying Process ◽  
Drying Time ◽  
Average Temperature ◽  
Ambient Relative Humidity ◽  
Average Relative Humidity ◽  
Drying Chamber

Abstrak. Manfaat dari proses pengeringan pala yaitu untuk tujuan pengawetan. Tujuan penelitian ini adalah untuk mengkaji proses pengeringan biji pala menggunakan alat pengering hybrid dengan sumber energi matahari dan biomassa serbuk kayu. Total biji pala yang dikeringkan adalah 15 kg. Pembakaran serbuk kayu dilakukan selama pengeringan di malam hari dengan laju 3kg/jam. Parameter penelitian meliputi iradiasi surya, temperatur, kelembaban relatif, kadar air, dan uji organoleptik terhadap warna dan aroma. Hasil penelitian menunjukkan bahwa iradiasi rata-rata yang diperoleh adalah 131,61 W/m2 pada hari pertama dan dihari kedua 131,08  W/m2. Temperatur dalam ruang pengering (44°C) lebih tinggi dibandingkan dengan temperatur lingkungan (33,5°C). Kelembaban relatif rata-rata ruang pengering (27,7%) lebih rendah dari kelembaban relatif rata-rata di lingkungan (42,7%). Untuk mencapai kadar air biji pala 10% dibutuhkan waktu 32 jam secara kontinu dengan alat pengering  dan 39 jam selama 4 hari secara intermitten dengan metode penjemuran. Kapasitas alat pengering 2x lebih besar dari kapasitas penjemuran, dan biji pala kering menggunakan alat pengering lebih disukai oleh panelis dari segi warna dan aromanya.Drying Characteristics of Nutmeg Seed (Myristica Fragranshoutt) by Using a Hybrid Dryer Used Heat Sources from Solar and Sawdust EnergyAbstract. The benefit of drying process of nutmeg seed is to prolong its life. The objective of the study was to observe the drying method of nutmeg seed by using a hybrid dryer used the heat sources from solar and biomass (sawdust) energy. The total nutmeg seed used in this study was approximately 15 kg. The combustion rate of biomass during the night was 3kg/h. The parameters investigated were solar irradiation, temperature, relative humidity, moisture content and organoleptic test on color and flavor. The results showed that the average solar irradiation was 131.61 W/m2 on the first and second day drying. The average temperature in the drying chamber (44°C) was higher than the average ambient temperature (33.5°C). The average relative humidity in the drying chamber (27.7%) was lower than the average ambient relative humidity (42.7%). To have the final moisture of nutmeg seed 10%, the drying time needed was 32 hours continuously by using hybrid dryer and 39 hours for 4 days intermittent by sundrying method.The dryer capacity was double of sundrying capacity, and the color and flavor of dried nutmeg seed produced by using hybrid dryer was preferred by respondents.Abstract. The benefit of drying process of nutmeg seed is to prolong its life. The objective of the study was to observe the drying method of nutmeg seed by using a hybrid dryer used the heat sources from solar and biomass (sawdust) energy. The total nutmeg seed used in this study was approximately 15 kg. The combustion rate of biomass during the night was 3kg/h. The parameters investigated were solar irradiation, temperature, relative humidity, moisture content and organoleptic test on color and flavor. The results showed that the average solar irradiation was 131.61 W/m2 on the first and second day drying. The average temperature in the drying chamber (44°C) was higher than the average ambient temperature (33.5°C). The average relative humidity in the drying chamber (27.7%) was lower than the average ambient relative humidity (42.7%). To have the final moisture of nutmeg seed 10%, the drying time needed was 32 hours continuously by using hybrid dryer and 39 hours for 4 days intermittent by sundrying method. The dryer capacity was double of sundrying capacity, and the color and flavor of dried nutmeg seed produced by using hybrid dryer was preferred by respondents.

scholarly journals Pengaruh kecepatan udara dan massa gabah terhadap kecepatan pengeringan gabah menggunakan pengering terfluidisasi

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
S. Syahrul ◽  
M. Mirmanto ◽  
S. Romdani ◽  
S. Sukmawaty
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
National Standards ◽  
Drying Process ◽  
Air Velocity ◽  
Drying Time ◽  
Grain Processing ◽  
Grain Moisture ◽  
Time Required ◽  
Drying Chamber

Grain processing does not meet the actual grain harvests. This is due to the unsuitable drying process. Milling grain entrepreneurs and farmers in Indonesia are currently conducting a drying process under the sun. Based on the National Standards Body (BSN), grain moisture content must be at 14% to maintain the grain at high qualities. The purpose of this study is to determine the effect of velocity and grain mass variations on drying times. The grain used in this study contains an initial moisture content of 22% ± 0.5%. The grain is dried by inserting it into the drying chamber and varying the air velocities and grain mass. The air velocities used are 4 m/s, 5 m/s, 6 m/s and the variations of the grain mass are 1 kg 2 kg and 3 kg. The results show that increasing the air velocity decreases the drying time. On the other hand, when the grain mass is increased, the drying time elevates. The air velocity and mass of the grain that results in the fastest drying time are 6 m/s and 2 kg. The time required for achieving the water content of 13.6% is 30 menit. At the air velocity of 4 m/s, and the grain masses of 1 kg, 2 kg, and 3 kg, to achieve moisture contents of 13.4%, 13.5% and 13.4% the drying time needs 50 minutes.

The Artificial Drying of Lightly Salted Codfish

1955 ◽  
Vol 12 (1) ◽  
pp. 68-74 ◽  
Author(s):  
R. Legendre
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Air Velocity ◽  
Drying Time ◽  
Salted Fish ◽  
The Press

The mechanical drying of lightly salted fish must be carried out by successive drying periods and press-piling. This procedure considerably reduces the drying time. Best results are obtained at a temperature of 80°F., and at an air velocity of 300 to 400 linear feet per minute. The relative humidity of the drying atmosphere should be maintained at about 50–55 per cent during the first drying period and 60–65 per cent during all subsequent ones. The first drying period should be of sufficient length to reduce the moisture content of the fish to about 55–60 per cent. The operation is then completed by successive 12-hour drying periods. Cross-piling during the press-piling period is important as it gives a product of better quality.

Pengeringan Biji Kakao dengan Pengering Surya Tipe Terowong Berpenggerak Sel Fotovoltaik di Manokwari

Agrotek ◽  
2018 ◽  
Vol 2 (6) ◽  
Author(s):  
Wilson Palelingan Aman
Keyword(s):  
Moisture Content ◽  
Performance Test ◽  
Initial Moisture Content ◽  
Maximum Temperature ◽  
Photovoltaic Module ◽  
Cocoa Beans ◽  
Drying Time ◽  
Tunnel Dryer ◽  
Heat Collector ◽  
New Construction

<em>A research about cocoa beans drying used solar tunnel dryer with photovoltaic module driven have conducted in Manokwari. Solar tunnel dryer used in this research adapted from type Hohenheim with photovoltaic module and integrated air heat collector has been installed at the Department of Agricultural Technology, Papua State University Manokwari to dried cocoa beans. The objectives of this research were to design solar tunnel dryer and evaluate it�s performance in dryed cocoa beans. The result obtained was a new construction of solar tunnel dryer for cocoa beans with dimensions 6 m of length and 0,9 m of wide. The dryer completed with photovoltaic module to drive the blowers of hot drying air. �Performance test of the dryer showed that drying of 10 kg of cocoa beans with initial moisture content about 70% wet basis needed 13 hours of drying time to achieved final moisture content about 7,17% wet basis. The drying time achieved was faster compared than traditional solar drying that needed 20 hours of drying time. The maximum temperature achieved in drying chamber was 60 <sup>o</sup>C.</em>

CATFISH DRYING (Clarias Batraclus) USING ‘TEKO BERSAYAP’ SOLAR DRYER

2012 ◽  
Vol 2 (1) ◽  
pp. 14-20
Author(s):  
Yuwana Yuwana
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Ambient Temperature ◽  
Drying Rate ◽  
Drying Process ◽  
Drying Time ◽  
Ambient Relative Humidity ◽  
Solar Dryer

Experiment on catfish drying employing ‘Teko Bersayap’ solar dryer was conducted. The result of the experiment indicated that the dryer was able to increase ambient temperature up to 44% and decrease ambient relative humidity up to 103%. Fish drying process followed equations : KAu = 74,94 e-0,03t for unsplitted fish and KAb = 79,25 e-0,09t for splitted fish, where KAu = moisture content of unsplitted fish (%), KAb = moisture content of splitted fish (%), t = drying time. Drying of unsplitted fish finished in 43.995 hours while drying of split fish completed in 15.29 hours. Splitting the fish increased 2,877 times drying rate.

scholarly journals Cherry Tomato Drying: Sun versus Convective Oven

Horticulturae ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 40
Author(s):  
Vincenzo Alfeo ◽  
Diego Planeta ◽  
Salvatore Velotto ◽  
Rosa Palmeri ◽  
Aldo Todaro
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Drying Process ◽  
Drying Time ◽  
Oven Drying ◽  
Sun Drying ◽  
Different Temperatures ◽  
Final Water Content ◽  
Drying Curves ◽  
Drying Conditions

Solar drying and convective oven drying of cherry tomatoes (Solanum lycopersicum) were compared. The changes in the chemical parameters of tomatoes and principal drying parameters were recorded during the drying process. Drying curves were fitted to several mathematical models, and the effects of air temperature during drying were evaluated by multiple regression analyses, comparing to previously reported models. Models for drying conditions indicated a final water content of 30% (semidry products) and 15% (dry products) was achieved, comparing sun-drying and convective oven drying at three different temperatures. After 26–28 h of sun drying, the tomato tissue had reached a moisture content of 15%. However, less drying time, about 10–11 h, was needed when starting with an initial moisture content of 92%. The tomato tissue had high ORAC and polyphenol content values after convective oven drying at 60 °C. The dried tomato samples had a satisfactory taste, color and antioxidant values.

scholarly journals DRYING STUDY OF EUCALYTPTUS STAIGERIANA LEAVES BY MONITORING THE HUMIDITY OF THE DRYER DISCHARGE

2005 ◽  
Vol 4 (1) ◽  
Author(s):  
N. P. Braga ◽  
A. Starquit ◽  
M. A. Cremasco ◽  
J. O. Brito
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Light Phase ◽  
Drying Time ◽  
Humidity Transducer ◽  
Drying Kinetic ◽  
Heavy Phase ◽  
Simultaneous Heat ◽  
Analytical Scale ◽  
Air Humidification

The drying phenomenon can be treated as simultaneous heat and mass transfer in both the light and heavy phases. In the present case, the phenomenon’s evolution is normally observed through the heating of and moisture removal from the heavy phase. On the other hand, while the material is heating, the light phase is cooling and humidifying. The goal of the present work is to present discharge air humidification curves as a function of the drying time for Eucalyptus staigeriana leaves drying experiments. For the air humidification measurements, a dry bulb thermocouple and relative humidity transducer were installed at both the dryer inlet and outlet. The dryer was linked to a data acquisition system, which recorded the dry bulb temperature and the relative humidity with time. These data were later used to calculate the air moisture content at the dryer inlet and outlet. The data obtained by this methodology are compared with the ones from drying kinetic (moisture content removing of the heavy phase along time), acquired by the evolution of wet material weight through the use of an analytical scale.

scholarly journals Aflatoxigenic contamination of freshly harvested white maize (Zea mays L.) from some selected Ugandan districts

2019 ◽  
Author(s):  
Timothy Omara
Keyword(s):  
Zea Mays ◽  
Moisture Content ◽  
Ochratoxin A ◽  
Zea Mays L ◽  
Lake Victoria ◽  
Total Aflatoxin ◽  
Strategic Adaptation ◽  
Maize Varieties ◽  
Agroecological Zones

The moisture content and total aflatoxin (AF) content of 27 samples of freshly harvested white maize (Zea mays L.) from Mubende (n = 3), Ibanda (n = 3), Jinja (n = 3), Mayuge (n = 3) , Buikwe (n = 3), Hoima (n = 3), Mpigi (n = 3), Masindi (n = 3) and Bugiri (n = 3) districts of Uganda representing the agroecological zones: Lake Victoria crescent, Western Highlands, South East and Lake Albert Crescent were determined in the second season harvest of January 2019 to March 2019. Moisture content ranged from 12.9 to 18.8% (mean moisture content varied from 13.9±0.35-17.2±1.55%) with the highest moisture recorded in maize from Ibanda. The highest mean AF contamination of 11.0±3.01 μg/kg was recorded in maize from Hoima while the lowest AF content of 3.8±1.30 μg/kg was recorded in maize from Mpigi. Despite the fact that all the samples had detectable aflatoxins, none of the maize samples had aflatoxin greater than WHO regulatory limit of 20 μg/kg. White maize in Uganda are precontaminated by aflatoxins prior to harvest. Whereas the spectre of aflatoxigenic contamination of foods remains a ticklish challenge to address, strategic adaptation and deployment of appropriate interventions can help secure a safe harvest. Farmers should plant maize varieties with established maturity periods to ensure timely harvesting. Further research should assess the presence of other mycotoxins as zearalenone, sterigmatocystin, ochratoxin A, citrinin, vomitoxin and diacetoxyscirpenol that may co-occur with aflatoxins in freshly harvested maize.

scholarly journals The Effect of Temperature and Humidity May Reduce the Growth Rate of the Coronavirus Disease 2019 Epidemic

2020 ◽  
Author(s):  
Lei Qin ◽  
Qiang Sun ◽  
Jiani Shao ◽  
Yang Chen ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Growth Rate ◽  
Relative Humidity ◽  
Effect Of Temperature ◽  
Average Temperature ◽  
Temperature And Humidity ◽  
Scatter Plots ◽  
Low Humidity ◽  
Average Relative Humidity ◽  
Effects Of Temperature ◽  
The Relationship

Abstract Background: The effects of temperature and humidity on the epidemic growth of coronavirus disease 2019 (COVID-19)remains unclear.Methods: Daily scatter plots between the epidemic growth rate (GR) and average temperature (AT) or average relative humidity (ARH) were presented with curve fitting through the “loess” method. The heterogeneity across days and provinces were calculated to assess the necessity of using a longitudinal model. Fixed effect models with polynomial terms were developed to quantify the relationship between variations in the GR and AT or ARH.Results: An increased AT dramatically reduced the GR when the AT was lower than −5°C, the GR was moderately reduced when the AT ranged from −5°C to 15°C, and the GR increased when the AT exceeded 15°C. An increasedARH increased theGR when the ARH was lower than 72% and reduced theGR when the ARH exceeded 72%.Conclusions: High temperatures and low humidity may reduce the GR of the COVID-19 epidemic. The temperature and humidity curves were not linearly associated with the COVID-19 GR.

Sign in / Sign up

Export Citation Format

Share Document