scholarly journals Study of Surface Morphology and Porosity of Composite Scaffold Nanofiber PVA/CS/HA with Electrospinning Method

2021 ◽  
Vol 6 (1) ◽  
pp. 26-32
Author(s):  
Hartatiek Hartatiek ◽  
◽  
Nasikhudin Nasikhudin ◽  
Abdul Aziz Dwi Putra ◽  
Yudyanto Yudyanto ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Surface Morphology ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Morphological Properties ◽  
Crystalline Size ◽  
Scaffold Material ◽  
Sem Image ◽  
Electrospinning Method

This research aims to compose nanofibers as a scaffold material in bone tissue engineering in terms of surface morphological properties and porosity. HA nanorod was prepared by the precipitation-ultrasonication method, while the PVA/CS/HA nanofiber composites were made by the electrospinning method using a static collector. HA was characterized by using XRD and SEM-EDX, while the PVA/CS/HA nanofiber composites used FTIR and SEM. The results show that HA nanorod has a crystalline size of 10.86 nm, crystallinity level of 52.38 per cent, and Ca/P ratio of 1.70. From the SEM image shows HA nanorod width of 11.6 nm and 97.53 nm in length and some of it still in the form of HA nanoparticles. The diameter and porosity of PVA/CS/HA nanofiber with addition of 0, 10, 20 per cent HA were 275, 212, 265 nm and 72.94, 69.49, 70.81 per cent, respectively.

scholarly journals Synthesis and Characterization of CSH/CS/n-HA Composite Scaffold for Bone Tissue Engineering

2021 ◽  
Author(s):  
Chunhua Gong ◽  
Haixia Tang ◽  
Yanbo Wu ◽  
Juan Guo ◽  
Ruixue Guo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Blood Compatibility ◽  
Dynamic Balance ◽  
Inorganic Materials ◽  
Morphological Properties ◽  
Iron Release

Abstract In this paper, chitosan/hydroxyapatite (CS/n-HA) were synthesized by ultrasound-assisted precipitation combined with inverse crosslinking-emulsion method. In order to obtain a scaffold material with excellent properties, Calcium sulfate hemihydrate (CSH) were combined with CS-HA obtained CSH/CS/n-HA composite scaffold via setting citric acid as solidifying liquid, which possessed better biodegradability, bioactivity, mechanical properties. The physicochemical, morphological properties of scaffolds were characterized by FTIR, XRD and TFSEM. In addition, explored were the mechanical, degradable, biocompatibility and iron release properties. The mechanical strength study indicated that the compressive strength of the porous composite scaffold was influenced by adding an appropriate amount of CS/n-HA composite microspheres. It was proved that the composite scaffold with 6% CS/n-HA content obtained the highest mechanical strength (17.46±1.29 MPa). The results illustrated that the composite scaffold possessed biodegradability and can form hydroxyapatite by dynamic balance of Ca and P elements. The hemolysis tests demonstrate that materials are non-hemolytic and have good blood compatibility. Therefore, the developed composite scaffolds are safe medical inorganic materials, which can potentially be applied in bone tissue engineering.

Hybrid nanostructured hydroxyapatite–chitosan composite scaffold: bioinspired fabrication, mechanical properties and biological properties

2015 ◽  
Vol 3 (23) ◽  
pp. 4679-4689 ◽  
Author(s):  
Ya-Ping Guo ◽  
Jun-Jie Guan ◽  
Jun Yang ◽  
Yang Wang ◽  
Chang-Qing Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Biological Properties ◽  
Chitosan Composite

A bioinspired strategy has been developed to fabricate a hybrid nanostructured hydroxyapatite–chitosan composite scaffold for bone tissue engineering.

Preparation and characterization of nano biphasic calcium phosphate/poly-L-lactide composite scaffold

2016 ◽  
Vol 23 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Weizhong Yang ◽  
Yong Yi ◽  
Yuan Ma ◽  
Li Zhang ◽  
Jianwen Gu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Cell Viability ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate ◽  
Composite Scaffold ◽  
Pore Wall ◽  
Tissue Engineering Scaffold ◽  
Plla Scaffold

AbstractNano biphasic calcium phosphate (BCP) particles were synthesized using the sol-gel method. As-prepared BCP particles were combined with poly-L-lactide (PLLA) to fabricate nano-BCP/PLLA composite scaffold through a series of processing steps containing solvent self-diffusion, hot-pressing, and particulate leaching. The composite had a suitable porous structure for bone tissue engineering scaffold. In comparison, micro-BCP/PLLA scaffold was studied as well. Nano-BCP particles were distributed homogeneously in the PLLA matrix, and much more tiny crystallites exposed on the surface of the pore wall. Due to the finer inorganic particle distribution in the PLLA phase and the larger area of the bioactive phase exposed in the pore wall surface, nano-BCP/PLLA scaffold had enhanced compressive strength, good bioactivity, and superior cell viability. A nonstoichiometric apatite layer could be rapidly formed on the surface of nano- BCP/PLLA when soaked in simulated body fluid. The MG-63 cell viability of nano-BCP/PLLA scaffold is significantly higher than that of micro-BCP/PLLA scaffold. Therefore, nano-BCP/PLLA composite may be a suitable alternative for bone tissue engineering scaffold.

scholarly journals A dual-application poly (dl-lactic-co-glycolic) acid (PLGA)-chitosan composite scaffold for potential use in bone tissue engineering

2017 ◽  
Vol 28 (16) ◽  
pp. 1966-1983 ◽  
Author(s):  
Yamina Boukari ◽  
Omar Qutachi ◽  
David J. Scurr ◽  
Andrew P. Morris ◽  
Stephen W. Doughty ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Glycolic Acid ◽  
Composite Scaffold ◽  
Chitosan Composite ◽  
Potential Use

Biomimetic composite scaffold of hydroxyapatite/gelatin-chitosan core-shell nanofibers for bone tissue engineering

2019 ◽  
Vol 97 ◽  
pp. 325-335 ◽  
Author(s):  
Peng Chen ◽  
Leyun Liu ◽  
Jiaqi Pan ◽  
Jie Mei ◽  
Chaorong Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Core Shell

scholarly journals 3D Printed Polycaprolactone/Gelatin/Bacterial Cellulose/Hydroxyapatite Composite Scaffold for Bone Tissue Engineering

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1962 ◽  
Author(s):  
Abdullah M. Cakmak ◽  
Semra Unal ◽  
Ali Sahin ◽  
Faik N. Oktar ◽  
Mustafa Sengor ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bacterial Cellulose ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Bone Tissue Regeneration ◽  
Engineering Applications ◽  
Bioactive Materials ◽  
Degradation Rates

Three-dimensional (3D) printing application is a promising method for bone tissue engineering. For enhanced bone tissue regeneration, it is essential to have printable composite materials with appealing properties such as construct porous, mechanical strength, thermal properties, controlled degradation rates, and the presence of bioactive materials. In this study, polycaprolactone (PCL), gelatin (GEL), bacterial cellulose (BC), and different hydroxyapatite (HA) concentrations were used to fabricate a novel PCL/GEL/BC/HA composite scaffold using 3D printing method for bone tissue engineering applications. Pore structure, mechanical, thermal, and chemical analyses were evaluated. 3D scaffolds with an ideal pore size (~300 µm) for use in bone tissue engineering were generated. The addition of both bacterial cellulose (BC) and hydroxyapatite (HA) into PCL/GEL scaffold increased cell proliferation and attachment. PCL/GEL/BC/HA composite scaffolds provide a potential for bone tissue engineering applications.

scholarly journals Acceleration of Bone Regeneration in Critical-Size Defect Using BMP-9-Loaded nHA/ColI/MWCNTs Scaffolds Seeded with Bone Marrow Mesenchymal Stem Cells

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Ran Zhang ◽  
Xuewen Li ◽  
Yao Liu ◽  
Xiaobo Gao ◽  
Tong Zhu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bone Marrow ◽  
Mesenchymal Stem Cells ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Marrow Mesenchymal Stem Cells

Biocompatible scaffolding materials play an important role in bone tissue engineering. This study sought to develop and characterize a nano-hydroxyapatite (nHA)/collagen I (ColI)/multi-walled carbon nanotube (MWCNT) composite scaffold loaded with recombinant bone morphogenetic protein-9 (BMP-9) for bone tissue engineering by in vitro and in vivo experiments. The composite nHA/ColI/MWCNT scaffolds were fabricated at various concentrations of MWCNTs (0.5, 1, and 1.5% wt) by blending and freeze drying. The porosity, swelling rate, water absorption rate, mechanical properties, and biocompatibility of scaffolds were measured. After loading with BMP-9, bone marrow mesenchymal stem cells (BMMSCs) were seeded to evaluate their characteristics in vitro and in a critical sized defect in Sprague-Dawley rats in vivo. It was shown that the 1% MWCNT group was the most suitable for bone tissue engineering. Our results demonstrated that scaffolds loaded with BMP-9 promoted differentiation of BMMSCs into osteoblasts in vitro and induced more bone formation in vivo. To conclude, nHA/ColI/MWCNT scaffolds loaded with BMP-9 possess high biocompatibility and osteogenesis and are a good candidate for use in bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document