scholarly journals Design of Antenna Array for Ku-Band Wireless Application

2021 ◽  
Vol 20 (2) ◽  
pp. 107-112
Author(s):  
Sarmistha Satrusallya ◽  
Mihir N. Mohanty
Keyword(s):  
Satellite Communication ◽  
Antenna Design ◽  
Substrate Thickness ◽  
Long Distance ◽  
Single Degree Of Freedom ◽  
Array Type ◽  
Parasitic Patch ◽  
Distance Communication ◽  
Wireless Application ◽  
Ku Band

The antenna is the back bone of communication. In recent time, it needs to communicate in many ways along with different types of data such as voice, video, text etc. A long distance communication satellite needs a seamless transmission. The antenna design for satellite communication is to be array type to avoid the communication failure. This insists to work with array antenna to fulfil the seam less communication through satellite. Further the antenna design depends on the geometry of the patch, the placement of the patch for better gain and bandwidth. In this paper, authors have chosen the circular patch due to its single degree of freedom. The antenna is compact and is of 30X30mm2 where substrate thickness is considered as 1.6mm. The central patch is of rectangular shape with two slots. Slot is made because of better bandwidth. It is cut diagonally at the corner. As a result, the bandwidth is increased to 2.4GHz with a gain of 5.68dB. The substrate is considered to be FR4 Epoxy. The proposed design satisfies the compactness along with the satellite communication band with satisfactory gain. Simulation results compromise with the measured value. A 3X3 array of circular parasitic elements is considered. It is found that the antenna performs well at 14GHz that is meant for Ku band. The radius of the parasitic patch is considered as 4mm to satisfy the less space with good performance.

Design and Optimization of E Shape Multi Band Microstrip Patch Antenna Using Fractal Geometry for Wireless Communication

2020 ◽  
Vol 17 (5) ◽  
pp. 2409-2414
Author(s):  
Suresh Akkole ◽  
N. Vasudevan
Keyword(s):  
Microstrip Antenna ◽  
Satellite Communication ◽  
Long Distance ◽  
Band Frequency ◽  
Design And Optimization ◽  
Microstrip Patch ◽  
Radio Detection ◽  
Dielectric Constant And Loss ◽  
Distance Communication ◽  
Self Similar

In this paper an E shaped multiband fractal microstrip antenna proposed. The proposed E structure uses self similar fractal concept. The geometry is extended up to two iteration which resonates at seven multiband frequencies. The proposed antenna operates in 1–2 GHz (L-band), 2–4 GHz (S-band) and 4–8 GHz (C-band) frequencies and finds uses for military and secure long distance communication and C band frequency uses like satellite communication, Wi-Fi, and Radio Detection and Ranging. All designed antennas are optimized by IE3D antenna simulation tool with FR-4 material having 4.4 dielectric constant and loss tangent = 0.02. The parameters of all antennas have been examined in terms of directivity, VSWR, return loss, resonant frequency, bandwidth and gain.

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals Quantum repeaters based on concatenated bosonic and discrete-variable quantum codes

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Filip Rozpędek ◽  
Kyungjoo Noh ◽  
Qian Xu ◽  
Saikat Guha ◽  
Liang Jiang
Keyword(s):  
Continuous Variable ◽  
Quantum Codes ◽  
Discrete Variable ◽  
Long Distance ◽  
Concatenated Code ◽  
Different Types ◽  
Optical Modes ◽  
Distance Communication ◽  
Quantum Repeaters ◽  
Quantum Error

AbstractWe propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.

CONVERGENCE IMPROVEMENT OF ADAPTIVE LATTICE ALGORITHM WITH FUZZY BASED ADAPTIVE GAIN

1999 ◽  
Vol 09 (01n02) ◽  
pp. 125-132
Author(s):  
GEUN-TAEK RYU ◽  
DAE-SUNG KIM ◽  
DAE-YOUNG LEE ◽  
SUNG-HWAN HAN ◽  
HYEON-DEOK BAE
Keyword(s):  
Adaptive Filters ◽  
Communication Channel ◽  
Long Distance ◽  
Input And Output ◽  
Forward Prediction ◽  
Adaptation Procedure ◽  
Distance Communication ◽  
One Step ◽  
Input Variables ◽  
Lattice Algorithm

The choice of the adaptive gain is important to the performance of LMS-based adaptive filters. Depending on application areas, the realization structure of the filters is also important. This letter presents an adaptive lattice algorithm which adjusts the adaptive gain of LMS using fuzzy if-then rules determined by matching input and output variables during adaptation procedure. In each lattice filter stage, this filter adjusts the adaptive gain as the output of the fuzzy logic which has two input variables, normalized squared forward prediction error and one step previous adaptive gain. The proposed algorithm is applied to echo canceling problem of long distance communication channel. The simulation results are compared with NLMS on TDL and lattice structures.

Basic communication sciences

1969 ◽  
Vol 308 (1493) ◽  
pp. 183-198
Keyword(s):  
Long Distance ◽  
Earth Station ◽  
Early Communication ◽  
Technical Developments ◽  
Radiated Power ◽  
The Earth ◽  
Distance Communication ◽  
Quality Of Transmission ◽  
Communication Equipment

The feasibility and utility of long-distance communication via Earth-orbiting satellites has been demonstrated during recent years and it is appropriate therefore to focus attention on the more important scientific studies and technical developments that will be needed if full use is to be made of this valuable mode of communication in the future. The early communication satellites (the Telstar and Relay series) were pioneers in a relatively unknown propagation environment. The satellites themselves were conceptually simple and the communication equipment consisted essentially of a frequency-changing transponder with an r. f. power output of a few watts and a bandwidth some tens of megahertz. Carrier frequencies in the range 2 to 6 GHz were employed; typically either 2 or 6 GHz was used for transmission and 4 GHz for reception at the Earth station. To obtain an adequate signal/noise ratio at the output of the Earth station receiver, frequency modulation was employed, the frequency deviations being greater than those used on terrestrial microwave links. Launcher limitations and other factors meant that the satellites had to be placed in inclined elliptical orbits (see figure 1) with maximum heights of only a few thousand miles. Nevertheless, these satellites demonstrated that some hundreds of frequency-division multiplex telephony circuits, or a television channel, could be achieved with generally satisfactory quality of transmission. It is to be noted, however, that the satellite transponders accommodated only one, or at the most two, r. f. carriers at any time, and that the transmission performance was at times marginal due to limitations of the satellite effective radiated power. Furthermore, these relatively low orbit satellites provided communication in periods of generally less than an hour at a time and required continuous tracking by the Earth station aerials, due to movement of the satellites relative to the Earth.

Sign in / Sign up

Export Citation Format

Share Document