scholarly journals Carbon Nanosorbent for Purification Different Biomolecules

2011 ◽  
Vol 14 (1) ◽  
pp. 41
Author(s):  
Z.A. Mansurov ◽  
A.R. Kerimkulova ◽  
S.A. Ibragimova ◽  
E.Y. Gukenheimer
Keyword(s):  
Carbon Nanostructures ◽  
Large Scale ◽  
Carbon Materials ◽  
Raw Materials ◽  
Carbon Sorbent ◽  
Nanostructured Carbon ◽  
Lipid Complex ◽  
Carbon Sorbents ◽  
Physico Chemical ◽  
Chemical Studies

The article presents the results of physico-chemical studies on the development of nanostructured carbon materials from domestic raw materials. Were obtained and tested micro-mesoporous carbon sorbents for molecular-sieve chromatography of markers and investigated the applicability of carbon sorbents for the separation of protein-lipid complex, and plant bio-stimulator. Carbon sorbents have well-developed porous structure but their disadvantage is the weak mechanical<br />strength. Recently it was shown that some carbon nanostructures have enormous strength. Thus arose the need to give the nano structured elements to carbon sorbent. Creating carbon sorbents containing nanocarbon structure was the aim of our study, as these by sorbents will be very useful for large-scale purification of biomolecules.

Mesoporous Nano Carbon Sorbents for Separating Different Biomolecules

2012 ◽  
Vol 535-537 ◽  
pp. 284-288 ◽  
Author(s):  
Almagul R. Kerimkulova ◽  
Seitkhan Azat ◽  
Zulkhair A. Mansurov ◽  
Murat K. Gilmanov ◽  
S.A. Ibragimova ◽  
...  
Keyword(s):  
Molecular Sieve ◽  
Mesoporous Carbon ◽  
Carbon Materials ◽  
Raw Materials ◽  
Nanostructured Carbon ◽  
Lipid Complex ◽  
Carbon Sorbents ◽  
Physico Chemical ◽  
Chemical Studies ◽  
Nano Carbon

The article presents the results of physico-chemical studies on the development of nanostructured carbon materials from domestic raw materials. Were obtained and tested micro-mesoporous carbon sorbents for molecular-sieve chromatography of markers and investigated the applicability of carbon sorbents for the separation of protein-lipid complex, and plant bio-stimulator.

scholarly journals An Approach to Prevent Air Pollution and Generate Electricity Using Nanostructured Carbon Materials

2021 ◽  
Vol 6 (1) ◽  
pp. 1-8
Author(s):  
Samrat Mondal ◽  
Avishek Bhadra ◽  
Souvik Chakraborty ◽  
Suraj Prasad ◽  
Shouvik Chakraborty
Keyword(s):  
Air Pollution ◽  
Large Scale ◽  
Fossil Fuels ◽  
Carbon Materials ◽  
Real Life ◽  
Energy Resource ◽  
Nanostructured Carbon ◽  
New Methods ◽  
Living Organisms ◽  
Different Sources

Pollution is one of the major threats for the environment as well as society. It causes severe problems for the living organisms and can gives birth of various unknown issues. Different sources like cars, industrial belts, fossil fuels etc. are the major causes of air pollution. Different researchers are working to develop new methods to combat air pollution. In this work, a new solution is proposed to fight against air pollution. The proposed solution is based on nanotechnology which not only fight against the air pollution but, it can generate electricity using the nanostructured carbon materials. The proposed solution can be deployed in real life scenario to reduce the air pollution and produce electricity in a large scale to provide an alternate energy resource to the society.

scholarly journals High-strength fluoroanhydrite composition

2019 ◽  
Author(s):  
Grigory Yakovlev ◽  
Jadvyga Keriene ◽  
Valery Grakhov ◽  
Rostislav Drochytka ◽  
Anastasiya Gordina ◽  
...  
Keyword(s):  
Water Resistance ◽  
Raw Materials ◽  
Waste Product ◽  
High Strength ◽  
Structure And Properties ◽  
X Ray ◽  
Physico Chemical ◽  
Gypsum Plaster ◽  
Chemical Studies ◽  
Increased Strength

The research studies the properties of a high-strength anhydrite composition based on fluoroanhydrite, a waste product of hydrofluoric acid. To activate fluoranhydrite, Na3PO4 sodium phosphate was added to the composition in an amount of 3% of the mass. The physico-chemical studies of the structure and properties of activated fluoroanhydrite conducted using infrared spectroscopy and X-ray phase analysis showed changes in the composition of the hardened composite, and the study of the fluoroanhydrite microstructure revealed the formation of a denser matrix with the increased strength. An increase in the water resistance of the developed binder matrix was noted. The composition can be used as a cheap substitute for gypsum plaster due to the low prime cost of raw materials, and also contribute to the improvement of the environmental situation in fluoroanhydrite disposal sites.

scholarly journals Carbon Nanostructures for Actuators: An Overview of Recent Developments

Actuators ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 46 ◽  
Author(s):  
Mauro Giorcelli ◽  
Mattia Bartoli
Keyword(s):  
Carbon Nanotubes ◽  
Material Science ◽  
Carbon Nanostructures ◽  
Carbon Materials ◽  
Cutting Edge ◽  
Main Role ◽  
Nanostructured Carbon ◽  
Intrinsic Properties ◽  
Recent Developments ◽  
Carbon Based

In recent decades, micro and nanoscale technologies have become cutting-edge frontiers in material science and device developments. This worldwide trend has induced further improvements in actuator production with enhanced performance. A main role has been played by nanostructured carbon-based materials, i.e., carbon nanotubes and graphene, due to their intrinsic properties and easy functionalization. Moreover, the nanoscale decoration of these materials has led to the design of doped and decorated carbon-based devices effectively used as actuators incorporating metals and metal-based structures. This review provides an overview and discussion of the overall process for producing AC actuators using nanostructured, doped, and decorated carbon materials. It highlights the differences and common aspects that make carbon materials one of the most promising resources in the field of actuators.

scholarly journals Physico-chemical studies of sorption materials based on biomass waste

2020 ◽  
Vol 161 ◽  
pp. 02003 ◽  
Author(s):  
Yulia Smyatskaya ◽  
Natalia Politaeva ◽  
Liliya Mukhametova
Keyword(s):  
Heavy Metal Ions ◽  
Raw Materials ◽  
Agricultural Waste ◽  
Expanded Graphite ◽  
Thermally Expanded Graphite ◽  
Biomass Waste ◽  
Residual Biomass ◽  
Sorption Material ◽  
Physico Chemical ◽  
Chemical Studies

This article discusses the possibility of using cheap raw materials for the treatment of wastewater from heavy metal ions using residual biomass and agricultural waste (sunflower husk, millet, buckwheat). Residual biomass is formed after the extraction of valuable components from microalgae and duckweed. The authors proposed to modify the sorption material using heat treatment and the introduction of additives, such as chitosan and thermally expanded graphite. Chitosan allows you to get sorption materials in the form of granules, which are convenient to use. The physicochemical properties of sorbents were studied. The sorption capacity for the obtained materials was from 5.0 to 32.0 mg/g.

On the diagnostics of Adonis L. species (Ranunculaceae) of the Russian flora

2020 ◽  
pp. 3-14
Author(s):  
Aleksandr Luferov
Keyword(s):  
Raw Materials ◽  
Natural Populations ◽  
Structural Features ◽  
Biologically Active ◽  
Scientific Medicine ◽  
Diagnostic Features ◽  
Plant Raw Materials ◽  
Similar Chemical ◽  
Chemical Studies ◽  
Alternative Sources

The article provides brief information about cardiotonic, sedative, cytostatic, diuretic, and antibacterial effects of biologically active compounds of Adonis L. (Ranunculaceae) species. Chemical studies allowed to identify the cardiac glycosides, or cardenolides: or cardenolides: adontoxin, adonitol, adonitoxigenin, acetyldigitoxin and others. In scientific medicine, it is currently allowed to use Adonis vernalis L. Other types of Adonis have a similar chemical composition and are offered as substitutes for this official species, for example, Adonis apennina L. Many Adonis species have limited natural resources, and in some regions are rare, requiring conservation of their natural populations. The search for alternative sources of medicinal plant raw materials, based on this, is relevant. The experimental part of our research was carried out using the morphological and geographical method with the involvement of information on ecology and phenology. For the first time summarizes the diagnostic features of Adonis flora of Russian flora. Previously unknown structural features (shape and size of anthers) were identified that characterize the subgenera Adonanthe and Adonis. Taxonomic study of the genus Adonis of the Russian flora allowed us to determine its species composition, clarify its systematic affiliation, and nomenclature synonyms. 9 species were identified. Of these, 6 are perennials belonging to the subgenus Adonanthe, section Consiligo, which includes 2 subsections: Amurenses (2 species) and Vernales, which is differentiated into 2 rows: Apenninae (2 species) and Vernales (2 species). Subgenus Adonis is represented by 2 sections: Adonis (1 species) and Lophocarpa with sections Aestivales (1 species) and Dentatae (1 species). For all the considered species and varieties, the main distribution areas are given. A key has been compiled to determine the wild Adonis species distributed in Russia.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

Phamacognostical and Pharmaceutical Evaluation of Chandrashakaladi Vataka - A herbal formulation

2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Dr. Akash S Changole ◽  
Mandip Goyal ◽  
Harish CR
Keyword(s):  
Classical Method ◽  
Raw Materials ◽  
Herbal Medicines ◽  
Vital Role ◽  
Published Data ◽  
Herbal Formulation ◽  
Physico Chemical ◽  
Good Manufacturing Practices ◽  
Solvent Systems

Background: Quality control and the standardization of herbal medicines involve steps like standard source and quality of raw materials, good manufacturing practices and adequate analytical screening. These practices play a vital role in guaranting the quality and stability of herbal preparations. Chandrashakaladi Vataka is an Ayurvedic herbal formulation mentioned to be beneficial in Kushtha. Till date no published data is available on its analytical profile. Aim: To develop the Pharmacognostical and Phyto-chemical profile of Chandrashakaladi Vataka. Material and Methods: Chandrashakaladi Vataka was prepared as per classical method and analytical findings were recorded. Samples were subjected to organoleptic analysis, physico-chemical analysis and HPTLC examination by optimizing the solvent systems. Results and Conclusions: Pharmacognostical profile of Chandrashakaladi Vataka was established. Loss on drying, Ash value, Acid insoluble extract, Methanol soluble extract, Chandrashakaladi Vataka was found within prescribed limits. HPTLC profile of Chandrashakaladi Vataka revealed 12 spots at 254 nm and 13 spots at 366 nm.

Sign in / Sign up

Export Citation Format

Share Document