Simulation of transient processes of a thyristorreactor device for voltage regulation on load

Innotrans ◽  
2020 ◽  
pp. 69-72
Author(s):  
Timofej S. Tarasovskij ◽  

The article presents a simulation model of a thyristor- reactor switching device (TRSD) created in the Matlab Simulink program. The model of a TRSD single- phase connected to a single-phase transformer has been created, and transients that occur during voltage regulation in a single-phase circuit are considered and analyzed. Supplement was introduced to the method for calculating TRSD thyristors. The developed model of a single phase of TRSD can be used to create models of converter transformers on traction substations with TRSD.

Author(s):  
Salam Waley Shneen ◽  
Fatin Nabeel Abdullah ◽  
Dina Harith Shaker

This work is presenting under the title simulation model of single phase PWM inverter by using MATLAB/Simulink. There are many researchers’ works in this field with the different ways because it is important field and it has many applications. The converter DC power to AC power for any system that mean it need the power electronic device (inverter). The inverter is using when the source DC power and the load AC power. In this work, the simulation system includes the source 300V DC power, inverter, LC filter and load (R). The simulation result shows the waveform of all part in this system like input and output current and voltage.


Author(s):  
Zhenxing Li ◽  
Jialing Wan ◽  
Pengfei Wang ◽  
Hanli Weng ◽  
Zhenhua Li

AbstractFault section location of a single-phase grounding fault is affected by the neutral grounding mode of the system, transition resistance, and the blind zone. A fault section locating method based on an amplitude feature and an intelligent distance algorithm is proposed to eliminate the influence of the above factors. By analyzing and comparing the amplitude characteristics of the zero-sequence current transient components at both ends of the healthy section and the faulty section, a distance algorithm with strong abnormal data immune capability is introduced in this paper. The matching degree of the amplitude characteristics at both ends of the feeder section are used as the criterion and by comparing with the set threshold, the faulty section is effectively determined. Finally, simulations using Matlab/Simulink and PSCAD/EMTDC show that the proposed section locating method can locate the faulty section accurately, and is not affected by grounding mode, grounding resistance, or the blind zone.


2013 ◽  
Vol 427-429 ◽  
pp. 133-136
Author(s):  
Qiang Song ◽  
Pu Zeng

The driving theory and the dynamic characteristics of small radius steering, medium radius steering and big radius steering is analyzed, and the simulation model is established under Matlab/Simulink. Then the track bulldozers steering performance of the three sheerings is simulated. The results show that, at different steering modes, the running states of the two sides driving motors are not the same, and the track driving forces of the two sides vary widely. The track driving force is great in the small radius steering model, while small in the medium and big radius steering models. The simulation results lay the foundation for dual-motor drive track bulldozers steering performance matching.


Author(s):  
И.Е. Кажекин

В работе рассмотрены вопросы безопасности бортовых электросетей объектов морской индустрии, показано влияние перенапряжений на их основные показатели, которыми определяются опасности смертельных электротравм, опасности возникновения пожаров и взрывов. Представлены результаты математического моделирования электрического разряда по уравнению Майра с учетом особенностей переходного процесса при однофазных замыканиях на корпус. Показана роль напряжения смещения нейтрали по постоянному потенциалу, наибольшие значения которого формируются при неустойчивом контакте фазы с корпусом судна. Описаны результаты экспериментальных исследований переходных процессов, сопровождающихся возникновением неустойчивыми искровыми разрядами. Сравнение результатов расчета по предложенной методике с результатами физических экспериментов показало весьма удовлетворительную сходимость. Предложенная модель может быть использована для уточнения показателей, характеризующих безопасность судовых электросетей. The paper deals with the safety issues of on-board power grids of the marine industry facilities, shows the influence of overvoltages on their main indicators, which determine the dangers of fatal electrical injuries, the risk of fires and explosions. The results of mathematical modeling of an electric discharge according to the Mayr equation, taking into account the features of the transient process in single-phase short circuits to the case, are presented. The role of the bias voltage of the neutral at a constant potential is shown, the highest values ​​of which are formed during unstable contact of the phase with the ship's hull. The results of experimental studies of transient processes accompanied by the appearance of unstable spark discharges are described. Comparison of the calculation results by the proposed method with the results of physical experiments showed a very satisfactory convergence. The proposed model can be used to refine the indicators characterizing the safety of ship power grids.


2021 ◽  
Vol 2125 (1) ◽  
pp. 012051
Author(s):  
Guoqing Qiu ◽  
Kedi Jiang ◽  
Shengyou Xu ◽  
Xin Yang ◽  
Wei Wang

Abstract Although the superior performance of SiC MOSFET devices has beenvalidated by many studies, it is necessary to overcome many technical bottlenecks to make SiC MOSFET gradually replace Si-based power devices into the mainstream. In view of the current situation where the performance of SiC MOSFETs in power conversion devices cannot be evaluated well at this stage, it is necessary to carry out fine modeling of SiC MOSFETs and establish accurate simulation models. In this paper, the powerful mathematical processing capability and rich modules of Matlab/Simulink are used to build a SiC MOSFET model, and then the product data sheet is compared with the fitted data. The results show that the switching simulation waveforms are in general agreement with the data sheet waveforms, and the error is less than 7%. Verifing the accuracy of the model and reducing the difficulty of modeling, it provides a new idea for establishing the circuit simulation model of SiC MOSFET in Matlab/Simulink.


Sign in / Sign up

Export Citation Format

Share Document