scholarly journals Epigenetics Theoretical Limits of Synthetic Genomes: The Cases of Artificials Caulobacter (C. eth-2.0), Mycoplasma Mycoides (JCVI-Syn 1.0, JCVI-Syn 3.0 and JCVI_3A), E-coli and YEAST chr XII

Author(s):  
Jean-claude Perez

In (Venetz et al., 2019), authors rebuilt the essential genome of Caulobacter crescentus through the process of chemical synthesis rewriting and studied the genetic information content at the level of its essential genes. Then, they reduced the native Caulobacter crescentus native Caulobacter NA1000 genome sequence real genome ( 4042929 bp ) to the 785,701-bp reduced synthetic genome. Here we demonstrate the existence of a palindromic-like mirror structure that exists in real genomes and disappears totally in the synthetic genome. This biomathematic meta-organization is based on characteristic proportions of Fibonacci numbers between DNA single strand nucleotides proportions TC / AG on the one hand and TG / AC on the other hand. In both cases, we suggest that this meta-structure enhances the three-dimensional cohesion of the two DNA strands of the genome. We then generalize this study to the different synthetic genomes and synthetic cells published by the Craig Venter Institute on Mycoplasma Mycoides JCVI-syn1.0 (in 2010), JCVI-syn3.0 (in 2016) and JCVI-syn3A (in 2019). Finally, in the discussion section, we extend this study to synthetic genomes of E-Coli and Yeast chromosome XII.

Author(s):  
James A. Lake

The understanding of ribosome structure has advanced considerably in the last several years. Biochemists have characterized the constituent proteins and rRNA's of ribosomes. Complete sequences have been determined for some ribosomal proteins and specific antibodies have been prepared against all E. coli small subunit proteins. In addition, a number of naturally occuring systems of three dimensional ribosome crystals which are suitable for structural studies have been observed in eukaryotes. Although the crystals are, in general, too small for X-ray diffraction, their size is ideal for electron microscopy.


Author(s):  
M. Boublik ◽  
N. Robakis ◽  
J.S. Wall

The three-dimensional structure and function of biological supramolecular complexes are, in general, determined and stabilized by conformation and interactions of their macromolecular components. In the case of ribosomes, it has been suggested that one of the functions of ribosomal RNAs is to act as a scaffold maintaining the shape of the ribosomal subunits. In order to investigate this question, we have conducted a comparative TEM and STEM study of the structure of the small 30S subunit of E. coli and its 16S RNA.The conventional electron microscopic imaging of nucleic acids is performed by spreading them in the presence of protein or detergent; the particles are contrasted by electron dense solution (uranyl acetate) or by shadowing with metal (tungsten). By using the STEM on freeze-dried specimens we have avoided the shearing forces of the spreading, and minimized both the collapse of rRNA due to air drying and the loss of resolution due to staining or shadowing. Figure 1, is a conventional (TEM) electron micrograph of 30S E. coli subunits contrasted with uranyl acetate.


Author(s):  
Daniel Beniac ◽  
George Harauz

The structures of E. coli ribosomes have been extensively probed by electron microscopy of negatively stained and frozen hydrated preparations. Coupled with quantitative image analysis and three dimensional reconstruction, such approaches are worthwhile in defining size, shape, and quaternary organisation. The important question of how the nucleic acid and protein components are arranged with respect to each other remains difficult to answer, however. A microscopical technique that has been proposed to answer this query is electron spectroscopic imaging (ESI), in which scattered electrons with energy losses characteristic of inner shell ionisations are used to form specific elemental maps. Here, we report the use of image sorting and averaging techniques to determine the extent to which a phosphorus map of isolated ribosomal subunits can define the ribosomal RNA (rRNA) distribution within them.


Author(s):  
Douglas L. Dorset ◽  
Andrew K. Massalski

Matrix porin, the ompF gene product of E. coli, has been the object of a electron crystallographic study of its pore geometry in an attempt to understand its function as a membrane molecular sieve. Three polymorphic forms have been found for two-dimensional crystals reconstituted in phospholipid, two hexagonal forms with different lipid content and an orthorhombic form coexisting with and similar to the hexagonal form found after lipid loss. In projection these have been shown to retain the same three-fold pore triplet geometry and analyses of three-dimensional data reveal that the small hexagonal and orthorhombic polymorphs have similar structure as well as unit cell spacings.


Author(s):  
J.L. Carrascosa ◽  
G. Abella ◽  
S. Marco ◽  
M. Muyal ◽  
J.M. Carazo

Chaperonins are a class of proteins characterized by their role as morphogenetic factors. They trantsiently interact with the structural components of certain biological aggregates (viruses, enzymes etc), promoting their correct folding, assembly and, eventually transport. The groEL factor from E. coli is a conspicuous member of the chaperonins, as it promotes the assembly and morphogenesis of bacterial oligomers and/viral structures.We have studied groEL-like factors from two different bacteria:E. coli and B.subtilis. These factors share common morphological features , showing two different views: one is 6-fold, while the other shows 7 morphological units. There is also a correlation between the presence of a dominant 6-fold view and the fact of both bacteria been grown at low temperature (32°C), while the 7-fold is the main view at higher temperatures (42°C). As the two-dimensional projections of groEL were difficult to interprete, we studied their three-dimensional reconstruction by the random conical tilt series method from negatively stained particles.


1985 ◽  
Vol 40 (11) ◽  
pp. 1114-1120
Author(s):  
loan Motoc ◽  
Garland R. Marshall

A methodology to incorporate the three-dimensional molecular shape descriptor (3 D-MSD) into a quantitative structure-activity relationship is discussed in detail. The 3 D-MSD is calculated and correlated with Kiapp values for a set of 2,4-diamino-5-benzylpyrimidines which inhibit E. coli DHFR. The correlation (n = 22, r = 0.95, s = 0.214, F = 55.10) indicates that the polarization interaction dominates the enzyme-inhibitor interactional pattern.


2008 ◽  
Vol 190 (22) ◽  
pp. 7479-7490 ◽  
Author(s):  
Thithiwat May ◽  
Satoshi Okabe

ABSTRACT It has been shown that Escherichia coli harboring the derepressed IncFI and IncFII conjugative F plasmids form complex mature biofilms by using their F-pilus connections, whereas a plasmid-free strain forms only patchy biofilms. Therefore, in this study we investigated the contribution of a natural IncF conjugative F plasmid to the formation of E. coli biofilms. Unlike the presence of a derepressed F plasmid, the presence of a natural IncF F plasmid promoted biofilm formation by generating the cell-to-cell mating F pili between pairs of F+ cells (approximately two to four pili per cell) and by stimulating the formation of colanic acid and curli meshwork. Formation of colanic acid and curli was required after the initial deposition of F-pilus connections to generate a three-dimensional mushroom-type biofilm. In addition, we demonstrated that the conjugative factor of F plasmid, rather than a pilus synthesis function, was involved in curli production during biofilm formation, which promoted cell-surface interactions. Curli played an important role in the maturation process. Microarray experiments were performed to identify the genes involved in curli biosynthesis and regulation. The results suggested that a natural F plasmid was more likely an external activator that indirectly promoted curli production via bacterial regulatory systems (the EnvZ/OmpR two-component regulators and the RpoS and HN-S global regulators). These data provided new insights into the role of a natural F plasmid during the development of E. coli biofilms.


2005 ◽  
Vol 73 (10) ◽  
pp. 6332-6339 ◽  
Author(s):  
Charlotte M. A. Linde ◽  
Susanna Grundström ◽  
Erik Nordling ◽  
Essam Refai ◽  
Patrick J. Brennan ◽  
...  

ABSTRACT Granulysin and NK-lysin are homologous bactericidal proteins with a moderate residue identity (35%), both of which have antimycobacterial activity. Short loop peptides derived from the antimycobacterial domains of granulysin, NK-lysin, and a putative chicken NK-lysin were examined and shown to have comparable antimycobacterial but variable Escherichia coli activities. The known structure of the NK-lysin loop peptide was used to predict the structure of the equivalent peptides of granulysin and chicken NK-lysin by homology modeling. The last two adopted a secondary structure almost identical to that of NK-lysin. All three peptides form very similar three-dimensional (3-D) architectures in which the important basic residues assume the same positions in space. The basic residues in granulysin are arginine, while those in NK-lysin and chicken NK-lysin are a mixture of arginine and lysine. We altered the ratio of arginine to lysine in the granulysin fragment to examine the importance of basic residues for antimycobacterial activity. The alteration of the amino acids reduced the activity against E. coli to a larger extent than that against Mycobacterium smegmatis. In granulysin, the arginines in the loop structure are not crucial for antimycobacterial activity but are important for cytotoxicity. We suggest that the antibacterial domains of the related proteins granulysin, NK-lysin, and chicken NK-lysin have conserved their 3-D structure and their function against mycobacteria.


2019 ◽  
Author(s):  
Xinye Chen ◽  
Abbi miller ◽  
Shengting Cao ◽  
Yu Gan ◽  
Jie Zhang ◽  
...  

<div>A micro- and nano-fluidic device stacked with magnetic beads is developed to efficiently trap, concentrate, and retrieve Escherichia coli (E. coli) from bacteria suspension</div><div>and pig plasma. The small voids between the magnetic beads are used to physically isolate the bacteria in the device. We use computational fluid dynamics (CFD), 3D</div><div>tomography technology, and machine learning to probe and explain the bead stacking in a small 3D space with various flow rates. A combination of beads with different sizes is utilized to achieve a high capture efficiency of ~86% with a flow rate of 50 μL/min. Leveraging the high deformability of this device, the E. coli sample is retrieved from the designated bacteria suspension by applying a higher flow rate, followed by rapid magnetic separation. This unique function is also utilized to concentrate E. coli from the original bacteria suspension. An on-chip concentration</div><div>factor of ~11× is achieved by inputting 1,300 μL of the E. coli sample and then concentrating it in 100 μL buffer.</div><div>Importantly, this multiplexed, miniaturized, inexpensive, and transparent device is easy to fabricate and operate, making it ideal for pathogen separation in both laboratory and pointof- care (POC) settings.</div>


Sign in / Sign up

Export Citation Format

Share Document