scholarly journals Multi-objective UAV Positioning Mechanism for Sustainable Wireless Connectivity in Environments with Forbidden Flying Zones

2021 ◽  
Author(s):  
İbrahim Atlı ◽  
Metin Ozturk ◽  
Gianluca Camillo Valastro ◽  
Muhammad Zeeshan Asghar
Keyword(s):  
Energy Consumption ◽  
Unmanned Aerial Vehicles ◽  
Base Station ◽  
Clustering Method ◽  
Optimal Position ◽  
Q Learning ◽  
Cumulative Distance ◽  
Promising Solution ◽  
Centroid Location ◽  
Wireless Connectivity

Unmanned aerial vehicles (UAVs)-based communication system is a promising solution to meet coverage and capacity requirements of future wireless networks. However, UAV-enabled communications is constrained with its coverage, energy consumption, and flying regulations, and the number of works focusing on the sustainability aspect of UAV-assisted networking has been limited in the literature so far. In this paper, we propose a solution to this limitation; particularly, we design a $Q$-learning-based UAV positioning scheme for sustainable wireless connectivity considering key constraints, that are, altitude regulations, non-flight zones, and transmit power. The objective is to find the optimal position of the UAV base station (BS) and minimize the energy consumption while maximizing the number of users covered. Moreover, a weighting mechanism is developed, where the energy consumption and number of users covered can be prioritized according to network/battery conditions. The proposed Q-learning-based solution is compared to the baseline k-means clustering method, where the UAV BS is positioned at the centroid location that minimizes the cumulative distance between the UAV BS and the users. The results demonstrate that the proposed solution outperforms the baseline k-means clustering-based method in terms of the number of users covered while achieving the desired minimization of the energy consumption.

scholarly journals Multi-Objective UAV Positioning Mechanism for Sustainable Wireless Connectivity in Environments with Forbidden Flying Zones

Algorithms ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 302
Author(s):  
İbrahim Atli ◽  
Metin Ozturk ◽  
Gianluca C. Valastro ◽  
Muhammad Zeeshan Asghar
Keyword(s):  
Energy Consumption ◽  
Unmanned Aerial Vehicles ◽  
Base Station ◽  
Energy Usage ◽  
Weighting Method ◽  
Q Learning ◽  
Cumulative Distance ◽  
Reducing Energy ◽  
Wireless Connectivity

A communication system based on unmanned aerial vehicles (UAVs) is a viable alternative for meeting the coverage and capacity needs of future wireless networks. However, because of the limitations of UAV-enabled communications in terms of coverage, energy consumption, and flying laws, the number of studies focused on the sustainability element of UAV-assisted networking in the literature was limited thus far. We present a solution to this problem in this study; specifically, we design a Q-learning-based UAV placement strategy for long-term wireless connectivity while taking into account major constraints such as altitude regulations, nonflight zones, and transmit power. The goal is to determine the best location for the UAV base station (BS) while reducing energy consumption and increasing the number of users covered. Furthermore, a weighting method is devised, allowing energy usage and the number of users served to be prioritized based on network/battery circumstances. The suggested Q-learning-based solution is contrasted to the standard k-means clustering method, in which the UAV BS is positioned at the centroid location with the shortest cumulative distance between it and the users. The results demonstrate that the proposed solution outperforms the baseline k-means clustering-based method in terms of the number of users covered while achieving the desired minimization of the energy consumption.

Performance Analysis of RNC Clustering Protocol in Wireless Sensor Network

2019 ◽  
Vol 10 ◽  
Author(s):  
Piyush Rawat ◽  
Siddhartha Chauhan
Keyword(s):  
Energy Consumption ◽  
Network Performance ◽  
Energy Levels ◽  
Cluster Head ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Threshold Function ◽  
Efficient Manner ◽  
Clustering Protocol

Background and Objective: The functionalities of wireless sensor networks (WSN) are growing in various areas, so to handle the energy consumption of network in an efficient manner is a challenging task. The sensor nodes in the WSN are equipped with limited battery power, so there is a need to utilize the sensor power in an efficient way. The clustering of nodes in the network is one of the ways to handle the limited energy of nodes to enhance the lifetime of the network for its longer working without failure. Methods: The proposed approach is based on forming a cluster of various sensor nodes and then selecting a sensor as cluster head (CH). The heterogeneous sensor nodes are used in the proposed approach in which sensors are provided with different energy levels. The selection of an efficient node as CH can help in enhancing the network lifetime. The threshold function and random function are used for selecting the cluster head among various sensors for selecting the efficient node as CH. Various performance parameters such as network lifespan, packets transferred to the base station (BS) and energy consumption are used to perform the comparison between the proposed technique and previous approaches. Results and Discussion: To validate the working of the proposed technique the simulation is performed in MATLAB simulator. The proposed approach has enhanced the lifetime of the network as compared to the existing approaches. The proposed algorithm is compared with various existing techniques to measure its performance and effectiveness. The sensor nodes are randomly deployed in a 100m*100m area. Conclusion: The simulation results showed that the proposed technique has enhanced the lifespan of the network by utilizing the node’s energy in an efficient manner and reduced the consumption of energy for better network performance.

QoS Aware Multi-hop Multi-path Routing Approach in Wireless Sensor Networks

2019 ◽  
Vol 9 (1) ◽  
pp. 43-52
Author(s):  
Omkar Singh ◽  
Vinay Rishiwal
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Life Time ◽  
Base Station ◽  
Environmental Data ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
End To End

Background & Objective: Wireless Sensor Network (WSN) consist of huge number of tiny senor nodes. WSN collects environmental data and sends to the base station through multi-hop wireless communication. QoS is the salient aspect in wireless sensor networks that satisfies end-to-end QoS requirement on different parameters such as energy, network lifetime, packets delivery ratio and delay. Among them Energy consumption is the most important and challenging factor in WSN, since the senor nodes are made by battery reserved that tends towards life time of sensor networks. Methods: In this work an Improve-Energy Aware Multi-hop Multi-path Hierarchy (I-EAMMH) QoS based routing approach has been proposed and evaluated that reduces energy consumption and delivers data packets within time by selecting optimum cost path among discovered routes which extends network life time. Results and Conclusion: Simulation has been done in MATLAB on varying number of rounds 400- 2000 to checked the performance of proposed approach. I-EAMMH is compared with existing routing protocols namely EAMMH and LEACH and performs better in terms of end-to-end-delay, packet delivery ratio, as well as reduces the energy consumption 13%-19% and prolongs network lifetime 9%- 14%.

A Split Network based Routing Approach in Wireless Sensor Network to Enhance Network Stability

2019 ◽  
Vol 9 (4) ◽  
pp. 480-487 ◽  
Author(s):  
Hardeep S. Saini ◽  
Dinesh Arora
Keyword(s):  
Energy Consumption ◽  
Sensor Network ◽  
Energy Efficient ◽  
Cluster Head ◽  
Base Station ◽  
Operating Efficiency ◽  
Network Stability ◽  
Major Factors ◽  
Ch Selection

Background & Objective: The operating efficiency of a sensor network totally relies upon the energy that is consumed by the nodes to perform various tasks like data transmission etc. Thus, it becomes mandatory to consume the energy in an intelligent way so that the network can run for a long period. This paper proposed an energy efficient Cluster Head (CH) selection mechanism by considering the distance to Base Station (BS), distance to node and energy as major factors. The concept of volunteer node is also introduced with an objective to reduce the energy consumption of the CH to transmit data from source to BS. The role of the volunteer node is to transmit the data successfully from source to destination or BS. Conclusion: The results are observed with respect to the Alive nodes, dead nodes and energy consumption of the network. The outcome of the proposed work proves that it outperforms the traditional mechanisms.

PERFORMANCE EVALUATION ANALYSIS OF WIRELESS SENSOR NETWORKS ROUTING PROTOCOLS IN SMART GRIDS

2016 ◽  
Vol 26 (1) ◽  
pp. 17
Author(s):  
Carlos Deyvinson Reges Bessa
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Smart Grids ◽  
Network Routing ◽  
Base Station ◽  
Wireless Sensor ◽  
Delay Jitter ◽  
La Red

ABSTRACTThis work aims to study which wireless sensor network routing protocol is more suitable for Smart Grids applications, through simulation of AODV protocols, AOMDV, DSDV and HTR in the NS2 simulation environment. Was simulated a network based on a residential area with 47 residences, with one node for each residence and one base station, located about 25m from the other nodes. Many parameters, such as packet loss, throughput, delay, jitter and energy consumption were tested.  The network was increased to 78 and 93 nodes in order to evaluate the behavior of the protocols in larger networks. The tests proved that the HTR is the routing protocol that has the best results in performance and second best in energy consumption. The DSDV had the worst performance according to the tests.Key words.- Smart grid, QoS analysis, Wireless sensor networks, Routing protocols.RESUMENEste trabajo tiene como objetivo estudiar el protocolo de enrutamiento de la red de sensores inalámbricos es más adecuado para aplicaciones de redes inteligentes, a través de la simulación de protocolos AODV, AOMDV, DSDV y HTR en el entorno de simulación NS2. Se simuló una red basada en una zona residencial con 47 residencias, con un nodo para cada residencia y una estación base, situada a unos 25 metros de los otros nodos. Muchos parámetros, tales como la pérdida de paquetes, rendimiento, retardo, jitter y el consumo de energía se probaron. La red se incrementó a 78 y 93 nodos con el fin de evaluar el comportamiento de los protocolos de redes más grandes. Las pruebas demostraron que el HTR es el protocolo de enrutamiento que tiene los mejores resultados en el rendimiento y el segundo mejor en el consumo de energía. El DSDV tuvo el peor desempeño de acuerdo a las pruebas.Palabras clave.- redes inteligentes, análisis de calidad de servicio, redes de sensores inalámbricas, protocolos de enrutamiento.

Pre- and post-operam comparison of the energy consumption of a radio base station under energy efficiency actions

2021 ◽  
Vol 236 ◽  
pp. 110772
Author(s):  
Carmela Vetromile ◽  
Antonio Spagnuolo ◽  
Antonio Petraglia ◽  
Antonio Masiello ◽  
Maria Rosa di Cicco ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Base Station

scholarly journals Energy-Efficient Packet Forwarding Scheme Based on Fuzzy Decision-Making in Underwater Sensor Networks

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4368
Author(s):  
Jitander Kumar Pabani ◽  
Miguel-Ángel Luque-Nieto ◽  
Waheeduddin Hyder ◽  
Pablo Otero
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Real Life ◽  
Base Station ◽  
Fuzzy Decision Making ◽  
Underwater Sensor Networks ◽  
Packet Forwarding ◽  
Node Number ◽  
The Impact

Underwater Wireless Sensor Networks (UWSNs) are subjected to a multitude of real-life challenges. Maintaining adequate power consumption is one of the critical ones, for obvious reasons. This includes proper energy consumption due to nodes close to and far from the sink node (gateway), which affect the overall energy efficiency of the system. These wireless sensors gather and route the data to the onshore base station through the gateway at the sea surface. However, finding an optimum and efficient path from the source node to the gateway is a challenging task. The common reasons for the loss of energy in existing routing protocols for underwater are (1) a node shut down due to battery drainage, (2) packet loss or packet collision which causes re-transmission and hence affects the performance of the system, and (3) inappropriate selection of sensor node for forwarding data. To address these issues, an energy efficient packet forwarding scheme using fuzzy logic is proposed in this work. The proposed protocol uses three metrics: number of hops to reach the gateway node, number of neighbors (in the transmission range of a node) and the distance (or its equivalent received signal strength indicator, RSSI) in a 3D UWSN architecture. In addition, the performance of the system is also tested with adaptive and non-adaptive transmission ranges and scalable number of nodes to see the impact on energy consumption and number of hops. Simulation results show that the proposed protocol performs better than other existing techniques or in terms of parameters used in this scheme.

scholarly journals A Possible Smart Metering System Evolution for Rural and Remote Areas Employing Unmanned Aerial Vehicles and Internet of Things in Smart Grids

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1627
Author(s):  
Giovanni Battista Gaggero ◽  
Mario Marchese ◽  
Aya Moheddine ◽  
Fabio Patrone
Keyword(s):  
Energy Consumption ◽  
Internet Of Things ◽  
Unmanned Aerial Vehicles ◽  
Smart Metering ◽  
Rural And Remote ◽  
Electrical Grid ◽  
Remote Areas ◽  
Aerial Vehicles ◽  
Consumption Data ◽  
Rural And Remote Areas

The way of generating and distributing energy throughout the electrical grid to all users is evolving. The concept of Smart Grid (SG) took place to enhance the management of the electrical grid infrastructure and its functionalities from the traditional system to an improved one. To measure the energy consumption of the users is one of these functionalities that, in some countries, has already evolved from a periodical manual consumption reading to a more frequent and automatic one, leading to the concept of Smart Metering (SM). Technology improvement could be applied to the SM systems to allow, on one hand, a more efficient way to collect the energy consumption data of each user, and, on the other hand, a better distribution of the available energy through the infrastructure. Widespread communication solutions based on existing telecommunication infrastructures instead of using ad-hoc ones can be exploited for this purpose. In this paper, we recall the basic elements and the evolution of the SM network architecture focusing on how it could further improve in the near future. We report the main technologies and protocols which can be exploited for the data exchange throughout the infrastructure and the pros and cons of each solution. Finally, we propose an innovative solution as a possible evolution of the SM system. This solution is based on a set of Internet of Things (IoT) communication technologies called Low Power Wide Area Network (LPWAN) which could be employed to improve the performance of the currently used technologies and provide additional functionalities. We also propose the employment of Unmanned Aerial Vehicles (UAVs) to periodically collect energy consumption data, with evident advantages especially if employed in rural and remote areas. We show some preliminary performance results which allow assessing the feasibility of the proposed approach.

scholarly journals Dynamic Task Migration Combining Energy Efficiency and Load Balancing Optimization in Three-Tier UAV-Enabled Mobile Edge Computing System

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 190
Author(s):  
Wu Ouyang ◽  
Zhigang Chen ◽  
Jia Wu ◽  
Genghua Yu ◽  
Heng Zhang
Keyword(s):  
Energy Consumption ◽  
Load Balancing ◽  
Markov Decision Process ◽  
Decision Process ◽  
Base Station ◽  
Edge Computing ◽  
Mobile Edge Computing ◽  
Task Migration ◽  
Migration Strategy ◽  
Markov Decision

As transportation becomes more convenient and efficient, users move faster and faster. When a user leaves the service range of the original edge server, the original edge server needs to migrate the tasks offloaded by the user to other edge servers. An effective task migration strategy needs to fully consider the location of users, the load status of edge servers, and energy consumption, which make designing an effective task migration strategy a challenge. In this paper, we innovatively proposed a mobile edge computing (MEC) system architecture consisting of multiple smart mobile devices (SMDs), multiple unmanned aerial vehicle (UAV), and a base station (BS). Moreover, we establish the model of the Markov decision process with unknown rewards (MDPUR) based on the traditional Markov decision process (MDP), which comprehensively considers the three aspects of the migration distance, the residual energy status of the UAVs, and the load status of the UAVs. Based on the MDPUR model, we propose a advantage-based value iteration (ABVI) algorithm to obtain the effective task migration strategy, which can help the UAV group to achieve load balancing and reduce the total energy consumption of the UAV group under the premise of ensuring user service quality. Finally, the results of simulation experiments show that the ABVI algorithm is effective. In particular, the ABVI algorithm has better performance than the traditional value iterative algorithm. And in a dynamic environment, the ABVI algorithm is also very robust.

Sign in / Sign up

Export Citation Format

Share Document