A Split Network based Routing Approach in Wireless Sensor Network to Enhance Network Stability

2019 ◽  
Vol 9 (4) ◽  
pp. 480-487 ◽  
Author(s):  
Hardeep S. Saini ◽  
Dinesh Arora
Keyword(s):  
Energy Consumption ◽  
Sensor Network ◽  
Energy Efficient ◽  
Cluster Head ◽  
Base Station ◽  
Operating Efficiency ◽  
Network Stability ◽  
Major Factors ◽  
Ch Selection

Background & Objective: The operating efficiency of a sensor network totally relies upon the energy that is consumed by the nodes to perform various tasks like data transmission etc. Thus, it becomes mandatory to consume the energy in an intelligent way so that the network can run for a long period. This paper proposed an energy efficient Cluster Head (CH) selection mechanism by considering the distance to Base Station (BS), distance to node and energy as major factors. The concept of volunteer node is also introduced with an objective to reduce the energy consumption of the CH to transmit data from source to BS. The role of the volunteer node is to transmit the data successfully from source to destination or BS. Conclusion: The results are observed with respect to the Alive nodes, dead nodes and energy consumption of the network. The outcome of the proposed work proves that it outperforms the traditional mechanisms.

scholarly journals FOC-MOP – Fuzzy Optimal Clustering based Multi-Objective Parameter Route Selection for Energy Efficiency

2021 ◽  
Author(s):  
Pogula Sreed ◽  
S. Venkateswarlu
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Cluster Head ◽  
Base Station ◽  
Sensor Nodes ◽  
Node Degree ◽  
Emperor Penguin ◽  
Delivery Ratio ◽  
Cluster Heads ◽  
Ch Selection

Abstract Recently, the research area interest towards the development of wireless sensor network (WSN) has increased. However, WSNs have one of significant issues as improving an energy-efficient routing protocol. A WSN has a crucial problem of energy consumption that effects the network lifetime as sensor nodes have a limitation of power. To overcome these limitations, it’s required to improve energy-efficient communication protocols for WSNs. Different types of techniques have considered by various research communities for providing energy-efficient solutions for WSNs. The energy consumption reduces using the clustering as an efficient data collection method and the collected data forward to a cluster-head which belong to the nodes in clustered networks. The information transmits to BS (base station) either in an uncompressed or compressed manner after collecting all data by a cluster-head from all member nodes. Based on other cluster-heads, the data transmit in a multi-hop network. Due to the heavy inter-cluster relay, earlier death happens to the cluster-heads (CHs) that locates very closely to the sink. Therefore, a fuzzy optimal CH selection algorithm has proposed to select the optimal CHs to improve the lifetime. Based on different parameters like cluster load, communication cost, neighbour density, node degree, inter and intra cluster distance, and node energy, the proposed algorithm of CH selection chooses the CHs. To determine an optimal route for transmitting the data from CH to sink, the modified Emperor Penguin Optimization (EPO) uses after selecting the CH. The proposed technique implements and compares with other earlier methods in terms of packet delivery ratio, lifetime, energy consumption, end to end delay and throughput. The proposed approach shows best performance than the other methods based on the simulation results.

scholarly journals Recommended System for Cluster Head Selection in a Remote Sensor Cloud Environment Using the Fuzzy-Based Multi-Criteria Decision-Making Technique

2021 ◽  
Vol 13 (19) ◽  
pp. 10579
Author(s):  
Proshikshya Mukherjee ◽  
Prasant Kumar Pattnaik ◽  
Ahmed Abdulhakim Al-Absi ◽  
Dae-Ki Kang
Keyword(s):  
Decision Making ◽  
Energy Consumption ◽  
Energy Efficient ◽  
Fuzzy Ahp ◽  
Cluster Head ◽  
Base Station ◽  
Multi Criteria Decision Making ◽  
Cloud Environment ◽  
Sensor Cloud ◽  
Ch Selection

Clustering is an energy-efficient routing algorithm in a sensor cloud environment (SCE). The clustering sensor nodes communicate with the base station via a cluster head (CH), which can be selected based on the remaining energy, the base station distance, or the distance from the neighboring nodes. If the CH is selected based on the remaining energy and the base station is far away from the cluster head, then it is not an energy-efficient selection technique. The same applies to other criteria. For CH selection, a single criterion is not sufficient. Moreover, the traditional clustering algorithm head nodes keep changing in every round. Therefore, the traditional algorithm energy consumption is less, and nodes die faster. In this paper, the fuzzy multi-criteria decision-making (F-MCDM) technique is used for CH selection and a threshold value is fixed for the CH selection. The fuzzy analytical hierarchy process (AHP) and the fuzzy analytical network process (ANP) are used for CH selection. The performance evaluation results exhibit a 5% improvement compared to the fuzzy AHP clustering method and 10% improvement compared to the traditional method in terms of stability, energy consumption, throughput, and control overhead.

Sailfish optimizer algorithm (SFO) for optimized clustering in wireless sensor network (WSN)

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Battina Srinuvasu Kumar ◽  
S.G. Santhi ◽  
S. Narayana
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Energy Efficient ◽  
Cluster Head ◽  
Cuckoo Search ◽  
Wireless Sensor ◽  
Content Type ◽  
Network Cluster ◽  
Ideal Situation ◽  
Ch Selection

Purpose Inspired optimization algorithms respond to numerous scientific and engineering difficulties based on its flexibility and simplicity. Such algorithms are valid for optimization difficulties devoid of structural alterations. Design/methodology/approach This paper presents a nature-inspired optimization algorithm, named Sailfish optimizer (SFO) stimulated using sailfish group. Monetary custom of energy is a dangerous problem on wireless sensor network (WSN). Findings Network cluster is an effective method of reducing node power consumption and increasing network life. An algorithm for selecting cluster head (CHs) based on enhanced cuckoo search was proposed. But this algorithm uses a novel encoding system and wellness work. It integrates a few problems. To overthrow this method many metaheuristic-based CH selection algorithms are presented. To avoid this problem, this paper proposed the SFO algorithm based energy-efficient CH selection of WSN. Originality/value The proposed SFO algorithm based energy-efficient algorithm is used for discovering the CHs ideal situation. The simulations under delay, delratio, drop, energy, network lifetime, overhead and throughput are carried out.

scholarly journals An improved cluster formation process in wireless sensor network to decrease energy consumption

2020 ◽  
Author(s):  
Hamid Reza Farahzadi ◽  
Mostafa Langarizadeh ◽  
Mohammad Mirhosseini ◽  
Seyed Ali Fatemi Aghda
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Information Transfer ◽  
Cluster Head ◽  
High Energy ◽  
Residual Energy ◽  
Base Station ◽  
Wireless Sensor ◽  
Death Time

AbstractWireless sensor network has special features and many applications, which have attracted attention of many scientists. High energy consumption of these networks, as a drawback, can be reduced by a hierarchical routing algorithm. The proposed algorithm is based on the Low Energy Adaptive Clustering Hierarchy (LEACH) and Quadrant Cluster based LEACH (Q-LEACH) protocols. To reduce energy consumption and provide a more appropriate coverage, the network was divided into several regions and clusters were formed within each region. In selecting the cluster head (CH) in each round, the amount of residual energy and the distance from the center of each node were calculated by the base station (including the location and residual energy of each node) for all living nodes in each region. In this regard, the node with the largest value had the highest priority to be selected as the CH in each network region. The base station calculates the CH due to the lack of energy constraints and is also responsible for informing it throughout the network, which reduces the load consumption and tasks of nodes in the network. The information transfer steps in this protocol are similar to the LEACH protocol stages. To better evaluate the results, the proposed method was implemented with LEACH LEACH-SWDN, and Q-LEACH protocols using MATLAB software. The results showed better performance of the proposed method in network lifetime, first node death time, and the last node death time.

scholarly journals Trust-Aware and Low Energy Consumption Security Topology Protocol of Wireless Sensor Network

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Zuo Chen ◽  
Min He ◽  
Wei Liang ◽  
Kai Chen
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Cluster Head ◽  
Residual Energy ◽  
Base Station ◽  
Low Energy ◽  
Wireless Sensor ◽  
Trust Value ◽  
Low Energy Consumption

Wireless sensor network (WSN) is a kind of distributed and self-organizing networks, in which the sensor nodes have limited communication bandwidth, memory, and limited energy. The topology construction of this network is usually vulnerable when attacked by malicious nodes. Besides, excessive energy consumption is a problem that can not be ignored. Therefore, this paper proposes a secure topology protocol of WSN which is trust-aware and of low energy consumption, called TLES. The TLES considers the trust value as an important factor affecting the behavior of node. In detail, the TLES would take trust value, residual energy of the nodes, and node density into consideration when selecting cluster head nodes. Then, TLES constructs these cluster head nodes by choosing the next hop node according to distance to base station (BS), nodes’ degrees, and residual energy, so as to establish a safe, reliable, and energy saving network. Experimental results show that the algorithm can effectively isolate the malicious node in the network and reduce the consumption of energy of the whole network.

scholarly journals An Election Energy Threshold Based Multi-Hop Routing Protocol in a Grid-Clustered Wireless Sensor Network

2018 ◽  
pp. 327-336 ◽  
Author(s):  
Funom Samuel Dadah ◽  
Ajayi Ore-Ofe ◽  
Aliyu D Usman ◽  
Y A Mshelia ◽  
M O Babatunde
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Routing Algorithm ◽  
Base Station ◽  
Energy Threshold ◽  
Wireless Sensor ◽  
Data Packets

Owing to the limited energy of sensor nodes (SNs) in a wireless sensor network (WSN), it is important to reduce and balance the energy consumption of the SNs in order to extend the WSN lifetime. Clustering mechanism is a highly efficient and effective mechanism for minimizing the amount of energy that SNs consume during the transmission of data packets. In this paper, an election energy threshold based multi-hop routing protocol (mEEMRP) is presented. In order to minimize energy consumption, this routing protocol uses grid clustering, where the network field is divided into grid clusters. SNs in each grid cluster select a cluster head (CH) based on a weight factor that takes the node location, node’s residual energy (RE) as well as the node’s distance from the base station into consideration. An energy efficient multi-hop routing algorithm is adopted during the transmission of data packets from the cluster heads (CHs) to the base station (BS). This multi-hop routing algorithm uses an election energy threshold value, T­nhCH that takes into consideration the RE of CHs as well as the distance between CHs. Simulation results show a 1.77% and 10.65% improvement in terms of network lifetime for two network field scenarios over Energy Efficient Multi-hop Routing Protocol (EEMRP).

F-MEEP: Fuzzy Logic Based Multihop Energy Efficient Routing Protocol for HWSN

2016 ◽  
Vol 15 (14) ◽  
pp. 7406-7415
Author(s):  
Muhammad Rizwan ◽  
Muhammad S. Nisar ◽  
Hongbo Jiang
Keyword(s):  
Energy Efficiency ◽  
Fuzzy Logic ◽  
Sensor Network ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Short Distance ◽  
Cluster Head ◽  
Base Station ◽  
Energy Efficient Routing ◽  
Inference System

Energy preservation is one of the most important research challenges in Wireless Senor Networks (WSNs). In recent research, topologies and architectures have investigated that allow energy efficiency in WSNs. Clustering is one of the most famous energy efficient techniques. In clustering, the selection of cluster head (CH) and short distance multi-hop energy efficient communication between CH and base station (BS) plays a vital role in order to achieve the desired energy efficiency in the sensor network. In this energy saving solution, we purpose and combine the idea of fuzzy logic based CH selection and multihop short distance communication between CH and base station in order to prolong the stable period and life span of network. Our proposed routing protocol, Fuzzy Logic based Multihop Energy Efficient Routing Protocol (FMEEP) for Heterogeneous WSN, which uses fuzzy logic inference system (FIS) in order to select a qualified CH in the cluster formation process and minimizes the overall energy dissipation in the sensor network. The simulation results have shown that purposed routing scheme outperforms in terms of stability period and network lifetime as compared to previous routing protocols. 

Presenting the Hybrid Algorithm of Honeybee - Harmony in Clustering and Routing of Wireless Sensor Networks

2019 ◽  
Vol 9 (3) ◽  
pp. 357-371
Author(s):  
Mohammad Sedighimanesh ◽  
Hesam Zandhesami ◽  
Ali Sedighimanesh
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Sensor Network ◽  
Network Lifetime ◽  
Cluster Head ◽  
Rechargeable Batteries ◽  
Base Station ◽  
Wireless Sensor

Background: Wireless sensor networks are considered as one of the 21st century's most important technologies. Sensors in wireless sensor networks usually have limited and sometimes non-rechargeable batteries, which they are supposed to be preserved for months or even years. That's why the energy consumption in these networks is of a great importance. Objective: One way to improve energy consumption in a wireless sensor network is to use clustering. In clustered networks, one node is known as the cluster head and other nodes as normal members, which normal nodes send the collected data to the cluster head, and the cluster head sends the information to the base station either by a single step or by multiple steps. Method: Using clustering simplifies resource management and increases scalability, reliability, and the network lifetime. Although the cluster formation involves a time- overhead and how to choose the cluster head is another problem, but its advantages are more than its disadvantages. : The primary aim of this study is to offer a solution to reduce energy consumption in the sensor network. In this study, during the selection of cluster heads, Honeybee Algorithm is used and also for routing, Harmonic Search Algorithm is used. In this paper, the simulation is performed by using MATLAB software and the proposed method is compared with the Low Energy Adaptive Clustering Hierarchy (LEACH) and the multi-objective fuzzy clustering algorithm (MOFCA). Result and Conclusion: By simulations of this study, we conclude that this research has remarkably increased the network lifetime with respect to EECS, LEACH, and MOFCA algorithms. In view of the energy constraints of the wireless sensor network and the non-rechargeable batteries in most cases, providing such solutions and using metaheuristic algorithms can result in a significant reduction in energy consumption and, consequently, increase in the network lifetime.

Distance Based Clustering Algorithm for Energy Efficiency in Wireless Sensor Networks

2014 ◽  
Vol 626 ◽  
pp. 20-25
Author(s):  
K. Kalaiselvi ◽  
G.R. Suresh
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Efficient ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Base Station ◽  
Wireless Sensor ◽  
Cluster Head Selection ◽  
Energy Efficient Routing

In wireless sensor networks Energy-efficient routing is an important issue due to the limited battery power within the network, Energy consumption is one of the important performance factors. Specifically for the election of cluster head selection and distance between the cluster head node and base station. The main objective of this proposed system is to reduce the energy consumption and prolong the network lifetime. This paper introduces a new clustering algorithm for energy efficient routing based on a cluster head selection

WN-LEACH: A Weighted Residual Energy Based Cluster-Heads Selection Algorithm for Wireless Sensor Network

2013 ◽  
Vol 765-767 ◽  
pp. 980-984
Author(s):  
Xi Rong Bao ◽  
Jia Hua Xie ◽  
Shuang Long Li
Keyword(s):  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Network ◽  
Routing Algorithm ◽  
Cluster Head ◽  
Residual Energy ◽  
Base Station ◽  
Wireless Sensor ◽  
Cumulative Number ◽  
Cluster Heads

This article focused on the energy limit property of Wireless Sensor Network, and proposed a residual energy based algorithm WN-LEACH, with the classic network mode of LEACH routing algorithm. The algorithm combines the proportion of residual energy in the total energy with the cumulative number of the normal nodes supported by the cluster heads as a cluster selection reference. In order to balance the energy consumption of each cluster-head, the algorithm took both the different positions of the base station and the initial energy of the network into consideration, and weighted the two factors to balance the energy consumption between transmitting the signals and data fusion. Simulation results show that the algorithm can promote the lifetime of the uneven energy network and does not impair the effects of the LEACH algorithm.

Sign in / Sign up

Export Citation Format

Share Document