scholarly journals The Design of One-Dimensional Motion and Two-Dimensional Motion Learning Media Using Digital Camera and Tracker-Based Air Track

2020 ◽  
Vol 6 (1) ◽  
pp. 65-74
Author(s):  
Fransisca Indra Dewi ◽  
Nur Aji Wibowo ◽  
Debora Natalia Sudjito ◽  
Ferdy Rondonuwu
Keyword(s):  
Digital Camera ◽  
Object Motion ◽  
Frame Rate ◽  
Two Dimensional ◽  
Digital Cameras ◽  
One Dimensional ◽  
Before And After ◽  
Conservation Of Momentum ◽  
Frictional Forces ◽  
Almost All

This research describes the results of the development of 2D air track tools designed for one and two-dimensional motion experiments with small frictional forces. Friction is minimized by using wind gusts through small holes made in all parts of the runway. Motion detection devices used are digital cameras and trackers. Digital cameras are used to record the motion of objects on a platform in the form of video with a specific frame-rate. Tracker is used to analyzing videos that contain information about object motion. This tool has been tested on one-dimensional motion, that is, an object that slides over an inclined plane and two-dimensional motion in the case of a collision of two objects. In the case of one-dimensional position graphs against time can be displayed, the instantaneous velocity and average and acceleration can be accurately determined. In the case of the collision of two objects, the position graph against time can also be displayed for each object before and after the collision. The velocity vector can be determined accurately so that the law of conservation of momentum and kinetic energy can be verified. One and two-dimensional motion are the concepts that underlie almost all other concepts in physics. Therefore one and two-dimensional motion experiments are important to build students’ experiences of the concept. Thus 2D air track platform based on digital cameras and Tracker software can be used as a physics learning media on motion kinematics materials that can display various kinematics graphs so that information about motion is complete.

scholarly journals Bionic Birdlike Imaging Using a Multi-Hyperuniform LED Array

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4084
Author(s):  
Xin-Yu Zhao ◽  
Li-Jing Li ◽  
Lei Cao ◽  
Ming-Jie Sun
Keyword(s):  
Imaging System ◽  
Color Image ◽  
Digital Camera ◽  
Frame Rate ◽  
Digital Cameras ◽  
Structured Illumination ◽  
Pixel Resolution ◽  
Led Array ◽  
Frequency Aliasing ◽  
Imaging Sensors

Digital cameras obtain color information of the scene using a chromatic filter, usually a Bayer filter, overlaid on a pixelated detector. However, the periodic arrangement of both the filter array and the detector array introduces frequency aliasing in sampling and color misregistration during demosaicking process which causes degradation of image quality. Inspired by the biological structure of the avian retinas, we developed a chromatic LED array which has a geometric arrangement of multi-hyperuniformity, which exhibits an irregularity on small-length scales but a quasi-uniformity on large scales, to suppress frequency aliasing and color misregistration in full color image retrieval. Experiments were performed with a single-pixel imaging system using the multi-hyperuniform chromatic LED array to provide structured illumination, and 208 fps frame rate was achieved at 32 × 32 pixel resolution. By comparing the experimental results with the images captured with a conventional digital camera, it has been demonstrated that the proposed imaging system forms images with less chromatic moiré patterns and color misregistration artifacts. The concept proposed verified here could provide insights for the design and the manufacturing of future bionic imaging sensors.

Improvement on Spherical Symmetry in Two-Dimensional Cylindrical Coordinates for a Class of Control Volume Lagrangian Schemes

2012 ◽  
Vol 11 (4) ◽  
pp. 1144-1168 ◽  
Author(s):  
Juan Cheng ◽  
Chi-Wang Shu
Keyword(s):  
Spherical Symmetry ◽  
Gas Dynamics ◽  
Control Volume ◽  
Two Dimensional ◽  
Cylindrical Coordinates ◽  
One Dimensional ◽  
First Order ◽  
Conservation Of Momentum ◽  
Numerical Fluxes ◽  
Geometric Conservation Law

AbstractIn, Maire developed a class of cell-centered Lagrangian schemes for solving Euler equations of compressible gas dynamics in cylindrical coordinates. These schemes use a node-based discretization of the numerical fluxes. The control volume version has several distinguished properties, including the conservation of mass, momentum and total energy and compatibility with the geometric conservation law (GCL). However it also has a limitation in that it cannot preserve spherical symmetry for one-dimensional spherical flow. An alternative is also given to use the first order area-weighted approach which can ensure spherical symmetry, at the price of sacrificing conservation of momentum. In this paper, we apply the methodology proposed in our recent work to the first order control volume scheme of Maire in to obtain the spherical symmetry property. The modified scheme can preserve one-dimensional spherical symmetry in a two-dimensional cylindrical geometry when computed on an equal-angle-zoned initial grid, and meanwhile it maintains its original good properties such as conservation and GCL. Several two-dimensional numerical examples in cylindrical coordinates are presented to demonstrate the good performance of the scheme in terms of symmetry, non-oscillation and robustness properties.

A one-dimensional self-gravitating stellar gas

1966 ◽  
Vol 25 ◽  
pp. 46-48 ◽  
Author(s):  
M. Lecar
Keyword(s):  
Gravitational Field ◽  
Phase Space ◽  
Motion Picture ◽  
Space Distribution ◽  
Two Dimensional ◽  
One Dimensional ◽  
Phase Space Distribution ◽  
Dimensional Phase Space ◽  
The Mean

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.

State-of-the-Art of Modeling Surface Water Impoundments

1982 ◽  
Vol 14 (1-2) ◽  
pp. 241-261 ◽  
Author(s):  
P A Krenkel ◽  
R H French
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
State Of The Art ◽  
Rate Coefficients ◽  
Two Dimensional ◽  
One Dimensional ◽  
Integral Energy ◽  
Range Of Values ◽  
Dimensional Integral ◽  
Water Impoundment

The state-of-the-art of surface water impoundment modeling is examined from the viewpoints of both hydrodynamics and water quality. In the area of hydrodynamics current one dimensional integral energy and two dimensional models are discussed. In the area of water quality, the formulations used for various parameters are presented with a range of values for the associated rate coefficients.

The formation of gas hydrates under shock wave impact on the bubble media (two-dimensional case)

2010 ◽  
Vol 7 ◽  
pp. 90-97
Author(s):  
M.N. Galimzianov ◽  
I.A. Chiglintsev ◽  
U.O. Agisheva ◽  
V.A. Buzina
Keyword(s):  
Shock Wave ◽  
Gas Hydrates ◽  
Hydrate Formation ◽  
Dimensional Case ◽  
Two Dimensional ◽  
Wave Impact ◽  
Bubble Liquid ◽  
One Dimensional ◽  
Bubble Media ◽  
Main Factors

Formation of gas hydrates under shock wave impact on bubble media (two-dimensional case) The dynamics of plane one-dimensional shock waves applied to the available experimental data for the water–freon media is studied on the base of the theoretical model of the bubble liquid improved with taking into account possible hydrate formation. The scheme of accounting of the bubble crushing in a shock wave that is one of the main factors in the hydrate formation intensification with increasing shock wave amplitude is proposed.

Modifications of the Godunov method for computing disturbance propagation in an elastic body

2016 ◽  
Vol 11 (1) ◽  
pp. 119-126 ◽  
Author(s):  
A.A. Aganin ◽  
N.A. Khismatullina
Keyword(s):  
Elastic Body ◽  
Godunov Method ◽  
Two Dimensional ◽  
Dimensional Problem ◽  
Order Accuracy ◽  
One Dimensional ◽  
Disturbance Propagation ◽  
Linear Waves ◽  
Longitudinal And Shear Waves ◽  
Contact Discontinuities

Numerical investigation of efficiency of UNO- and TVD-modifications of the Godunov method of the second order accuracy for computation of linear waves in an elastic body in comparison with the classical Godunov method is carried out. To this end, one-dimensional cylindrical Riemann problems are considered. It is shown that the both modifications are considerably more accurate in describing radially converging as well as diverging longitudinal and shear waves and contact discontinuities both in one- and two-dimensional problem statements. At that the UNO-modification is more preferable than the TVD-modification because exact implementation of the TVD property in the TVD-modification is reached at the expense of “cutting” solution extrema.

Investigation of two-dimensional nonstationary processes of outflow a gas-saturated liquid from axisymmetric vessels

2012 ◽  
Vol 9 (1) ◽  
pp. 47-52
Author(s):  
R.Kh. Bolotnova ◽  
V.A. Buzina
Keyword(s):  
Comparative Analysis ◽  
Numerical Model ◽  
Liquid Mixture ◽  
Phase Model ◽  
Test Problems ◽  
Two Dimensional ◽  
Nonstationary Processes ◽  
Saturated Liquid ◽  
Two Phase ◽  
One Dimensional

The two-dimensional and two-phase model of the gas-liquid mixture is constructed. The validity of numerical model realization is justified by using a comparative analysis of test problems solution with one-dimensional calculations. The regularities of gas-saturated liquid outflow from axisymmetric vessels for different geometries are established.

Load Spectrum Compiling and Fatigue Life Estimation of the Automobile Wheel Hub

2020 ◽  
Vol 13 ◽  
Author(s):  
Xintian Liu ◽  
Yang Qu ◽  
Xiaobing Yang ◽  
Yongfeng Shen
Keyword(s):  
Fatigue Life ◽  
High Speed ◽  
Two Dimensional ◽  
Load Spectrum ◽  
One Dimensional ◽  
Life Estimation ◽  
Load Spectra ◽  
Fatigue Life Estimation ◽  
Program Load Spectrum ◽  
Program Load

Background:: In the process of high-speed driving, the wheel hub is constantly subjected to the impact load from the ground. Therefore, it is important to estimate the fatigue life of the hub in the design and production process. Objective:: This paper introduces a method to study the fatigue life of car hub based on the road load collected from test site. Methods:: Based on interval analysis, the distribution characteristics of load spectrum are analyzed. The fatigue life estimation of one - dimensional and two - dimensional load spectra is compared by compiling load spectra. Results:: According to the S-N curve cluster and the one-dimensional program load spectrum, the estimated range fatigue life of the hub is 397,100 km to 529,700 km. For unsymmetrical cyclic loading, each level means and amplitude of load were obtained through the Goodman fatigue empirical formula, and then according to S-N curve clusters in the upper and lower curves and two-dimensional program load spectrum, estimates the fatigue life of wheel hub of the interval is 329900 km to 435200 km, than one-dimensional load spectrum fatigue life was reduced by 16.9% - 17.8%. Conclusion:: This paper lays a foundation for the prediction of fatigue life and the bench test of fatigue durability of auto parts subjected to complex and variable random loads. At the same time, the research method can also be used to estimate the fatigue life of other bearing parts or high-speed moving parts and assemblies.

Sign in / Sign up

Export Citation Format

Share Document