scholarly journals Geometric part of uncertainties in the calculation constant of the primary four electrode conductivity cell.

ACTA IMEKO ◽  
2015 ◽  
Vol 4 (2) ◽  
pp. 18 ◽  
Author(s):  
Alexander Mikhal ◽  
Zygmunt Warsza

The paper presents the construction of a primary four electrode conductivity cell with calculated constant for the Ukrainian primary  standard of electrolytic conductivity (EC). The equations for calculating the cell constant and the error budget for calculating uncertainty are presented. The components of the budget are: errors due to the non-uniformity of the force lines of the electric field; errors  due to the accuracy of measurement standards and measuring instruments for determining length and diameter of the tube; and  errors due to manufacturing techniques of tubes and their assemblage. The article considers in detail the errors due to the non-ideal profile of the central part of the tube. Two methods to reduce the standard deviation are given: the method of linear interpolation for  compensation of the concave form which occurs along the axis of the tube and the method of equivalent triangles to compensate for  deviations from a circle that occur across the axis of the tube.

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1310 ◽  
Author(s):  
James J. Tronolone ◽  
Michael Orrill ◽  
Wonbin Song ◽  
Hyun Soo Kim ◽  
Byung Yang Lee ◽  
...  

Filamentous viruses called M13 bacteriophages are promising materials for devices with thin film coatings because phages are functionalizable, and they can self-assemble into smectic helicoidal nanofilament structures. However, the existing “pulling” approach to align the nanofilaments is slow and limits potential commercialization of this technology. This study uses an applied electric field to rapidly align the nanostructures in a fixed droplet. The electric field reduces pinning of the three-phase contact line, allowing it to recede at a constant rate. Atomic force microscopy reveals that the resulting aligned structures resemble those produced via the pulling method. The field-assisted alignment results in concentric color bands quantified with image analysis of red, green, and blue line profiles. The alignment technique shown here could reduce self-assembly time from hours to minutes and lend itself to scalable manufacturing techniques such as inkjet printing.


Vestnik MEI ◽  
2020 ◽  
Vol 6 (6) ◽  
pp. 53-59
Author(s):  
Nikolay Yu. Lysov ◽  
◽  
Aleksandr V. Orlov ◽  
Aleksandr G. Temnikov ◽  
Leonid L. Chernensky ◽  
...  

Studies of electrical discharges generated in the electric field of charged aerosol clouds make it possible to obtain better understanding of how lightning occurs in thunderclouds. For this purpose, an experimental setup was developed, which allows charged aerosol clouds of negative polarity to be produced. A charged aerosol cloud creates electric field strength sufficient to generate electrical discharges between this cloud and the earth. The experimental setup for obtaining an artificially produced charged aerosol cloud is briefly described. The experimental setup is equipped with a set of measuring instruments for recording the electrical and optical signals of discharges and for photographing the discharges themselves. A database has been accumulated in the course of experiments, which includes the waveforms of discharge current pulses recorded using digital oscilloscopes, the waveforms of signals from optical sensors recording the development of discharges in space and time, and the snapshots of discharges. By using the accumulated information it is possible to classify discharges that occur between artificially produced charged aerosol clouds of negative polarity and the earth by type and parameters. An analysis of the experimental data has shown that both upward and downward discharges can occur between a charged aerosol cloud and the earth, which is typical for natural lightning phenomena. The snapshots of the most characteristic types of electric discharges observed in experiments and simple models explaining the development of these discharges are studied.


Author(s):  
David J. Hand

While the quest for increased accuracy may be driven by the needs of applications, the effort to achieve accuracy of measurement itself stimulates other developments, in terms of measuring instruments and systems, and in terms of the understanding of the very nature of measurement. ‘Measurement and understanding’ explains that there are two fundamental aspects to measurement accuracy: precision (how much repeated measurements fluctuate about a central value) and bias (any systematic departure from the underlying true value, affecting all repeated measurements). It also discusses measurement and statistics and how representational measurement leads to some very deep and powerful tools for constructing models and theories about how the world works.


Soil Research ◽  
2015 ◽  
Vol 53 (5) ◽  
pp. 561 ◽  
Author(s):  
J. Huang ◽  
E. Zare ◽  
R. S. Malik ◽  
J. Triantafilis

Secondary soil salinisation occurs as a function of human interaction with the landscape. Increasing salinity is a major constraint to crop yield. The electrical conductivity of a saturated soil-paste extract (ECe, dS m–1) defines the level of salinity in soil. In order to manage salinity, farmers need to map its variation. However, ECe determination is time-consuming and expensive. Digital mapping of ECe is possible by using ancillary data such as easy-to-obtain digital elevation model, gamma-ray spectrometry and electromagnetic (EM) induction data. In this paper, we used these ancillary data and empirical best linear unbiased prediction (E-BLUP) to make a digital map of ECe. In this regard, we found that elevation, radioelement of thorium (Th) and logEM38-v were the most statistically useful ancillary data. We also developed an error-budget procedure to quantify the relative contributions that model, input (for all the ancillary datasets), and combined and individual covariate (for each of the ancillary datasets) error made to the prediction error of our map of ECe. The error-budget procedure used ordinary kriging, E-BLUP and conditional simulation to produce numerous realisations of the data and their underlying errors. Results show that the combined error of model error and input error was ~4.44 dS m–1. Compared with the standard deviation of observed soil ECe (3.61 dS m–1), the error was large. Of this error, most was attributable to the input error (1.38 dS m–1), which is larger than the model error (0.02 dS m–1). In terms of the input error, we determined that the larger standard deviation is attributable to the lack of ancillary data, namely the ECa in areas adjacent to the Darling River and on the aeolian dune where data collection was difficult owing to dense native vegetation.


2014 ◽  
Vol 2 ◽  
pp. 331-336 ◽  
Author(s):  
Alberto Daniel Salinas Montemayor ◽  
Jesús Fabián López ◽  
Jesús Cruz Álvarez

This research presets the critical factors that influence the use of cloud computing, in case studies of large and medium-sized enterprises in the metropolitan area of Monterrey.  The critical factors are found, according to literature: dependency provider; ignorance of the location, where the information, service knowledge, knowledge of laws, service offered by suppliers, is stored; cost; and information security, describing the research and development, which are significant and demonstrative in its impact.We used Cronbach's alpha to check the validity of the measurement instrument and used a linear regression method to measure the significance of the variables.  We also relied on some measuring instruments, such as Beta, R-squared, Standard Deviation, Anova, Tolerance, and Collinearity index to propose a model.


1999 ◽  
Author(s):  
Thomas Smekal ◽  
Cindy Briscoe ◽  
Tony Chan ◽  
Yung Chang ◽  
Seth Dobrin ◽  
...  

Abstract The development of an electric field cell lysis device for microfluidic applications will be presented. Detailed modeling of the electrode configuration for the optimization of the electric field has been performed. Device design and fabrication has been accomplished using traditional integrated circuit (IC) manufacturing techniques. As a result, murine lymphocytes have been lysed using several electrode configurations. The requisite electric field strength and pulse parameters for cell lysis were determined. The non-specific adsorption of the released DNA to the materials used in the fabrication of the device was observed. Surface passivation of the fabrication materials was effected through the use of silanization compounds.


2014 ◽  
Vol 04 (02) ◽  
pp. 1450013 ◽  
Author(s):  
A. S. Tonkoshkur ◽  
I. V. Gomilko ◽  
A. Yu Lyashkov

C–V characteristics of ZnO -based ceramic structures used in manufacturing high-voltage and low-voltage varistors of different chemical compositions and manufacturing techniques have been investigated. A correlation between the intensity of electric field corresponding to transition of the C–V characteristics to the negative capacitances and average sizes of grains of a varistor structure has been established. Obtained data have been interpreted with the use of notions of the percolation theory of electric conductivity. The Shklovskii–De Gennes model has been used. It has been shown that on the highly nonlinear segment of C–V characteristics of a varistor structure, the size of an infinite cluster are limited to several intercrystallite potential barriers. This result is observed in all kinds of investigated varistor ceramics.


1990 ◽  
Vol 28 (6) ◽  
pp. 587-590 ◽  
Author(s):  
C. Littwitz ◽  
T. Ragheb ◽  
L. A. Geddes

2000 ◽  
Vol 18 (7) ◽  
pp. 766-781 ◽  
Author(s):  
T. J. Fuller-Rowell ◽  
M. C. Codrescu ◽  
P. Wilkinson

Abstract. A physical model of the coupled thermosphere and ionosphere has been used to determine the accuracy of model predictions of the ionospheric response to geomagnetic activity, and assess our understanding of the physical processes. The physical model is driven by empirical descriptions of the high-latitude electric field and auroral precipitation, as measures of the strength of the magnetospheric sources of energy and momentum to the upper atmosphere. Both sources are keyed to the time-dependent TIROS/NOAA auroral power index. The output of the model is the departure of the ionospheric F region from the normal climatological mean. A 50-day interval towards the end of 1997 has been simulated with the model for two cases. The first simulation uses only the electric fields and auroral forcing from the empirical models, and the second has an additional source of random electric field variability. In both cases, output from the physical model is compared with F-region data from ionosonde stations. Quantitative model/data comparisons have been performed to move beyond the conventional "visual" scientific assessment, in order to determine the value of the predictions for operational use. For this study, the ionosphere at two ionosonde stations has been studied in depth, one each from the northern and southern mid-latitudes. The model clearly captures the seasonal dependence in the ionospheric response to geomagnetic activity at mid-latitude, reproducing the tendency for decreased ion density in the summer hemisphere and increased densities in winter. In contrast to the "visual" success of the model, the detailed quantitative comparisons, which are necessary for space weather applications, are less impressive. The accuracy, or value, of the model has been quantified by evaluating the daily standard deviation, the root-mean-square error, and the correlation coefficient between the data and model predictions. The modeled quiet-time variability, or standard deviation, and the increases during geomagnetic activity, agree well with the data in winter, but is low in summer. The RMS error of the physical model is about the same as the IRI empirical model during quiet times. During the storm events the RMS error of the model improves on IRI, but there are occasionally false-alarms. Using unsmoothed data over the full interval, the correlation coefficients between the model and data are low, between 0.3 and 0.4. Isolating the storm intervals increases the correlation to between 0.43 and 0.56, and by smoothing the data the values increases up to 0.65. The study illustrates the substantial difference between scientific success and a demonstration of value for space weather applications.Key words: Ionosphere (ionospheric disturbances; mid-latitude ionosphere; modeling and forecasting)


Sign in / Sign up

Export Citation Format

Share Document