scholarly journals Spectrophotometric method for the determination of Captopril in pharmaceutical formulations

2013 ◽  
Vol 10 (3) ◽  
pp. 965-970
Author(s):  
Baghdad Science Journal
Keyword(s):  
Aqueous Solution ◽  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Maximum Absorption ◽  
Neutral Medium ◽  
Pharmaceutical Tablets ◽  
Colored Product ◽  
Sensitive Spectrophotometric Method

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of captopril in aqueous solution. The method is based on reaction of captopril with 2,3-dichloro 1,4- naphthoquinon(Dichlone) in neutral medium to form a stable yellow colored product which shows maximum absorption at 347 nm with molar absorptivity of 5.6 ×103 L.mole-1. cm-1. The proposed method is applied successfully for determination of captopril in commercial pharmaceutical tablets.

scholarly journals Simple Spectrophotometric Method for Determination of Paroxetine in Tablets Using 1,2-Naphthoquinone-4-Sulphonate as a Chromogenic Reagent

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Ibrahim A. Darwish ◽  
Heba H. Abdine ◽  
Sawsan M. Amer ◽  
Lama I. Al-Rayes
Keyword(s):  
Spectrophotometric Method ◽  
Correlation Coefficients ◽  
Molar Absorptivity ◽  
Official Method ◽  
Calibration Data ◽  
Pharmaceutical Tablets ◽  
Relative Standard ◽  
Label Claim ◽  
Colored Product

Simple and rapid spectrophotometric method has been developed and validated for the determination of paroxetine (PRX) in tablets. The proposed method was based on nucleophilic substitution reaction of PRX with 1,2-naphthoquinone-4-sulphonate (NQS) in an alkaline medium to form an orange-colored product of maximum absorption peak () at 488 nm. The stoichiometry and kinetics of the reaction were studied, and the reaction mechanism was postulated. Under the optimized reaction conditions, Beer's law correlating the absorbance (A) with PRX concentration (C) was obeyed in the range of 1–8 g . The regression equation for the calibration data was: A = 0.0031 + 0.1609 C, with good correlation coefficients (0.9992). The molar absorptivity () was L  1 . The limits of detection and quantitation were 0.3 and 0.8 g , respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the determination of PRX in its pharmaceutical tablets with good accuracy and precisions; the label claim percentage was %. The results obtained by the proposed method were comparable with those obtained by the official method.

scholarly journals DEVELOPMENT OF EXTRACTIVE SPECTROPHOTOMETRIC METHOD FOR THE DETERMINATION OF IRON (III) WITH SCHIFF BASE 2-[(2-HYDROXYPHENYLIMINO) METHYL]-4-NITROPHENOL

2016 ◽  
Vol 8 (4) ◽  
pp. 89 ◽  
Author(s):  
Datta B. Mandhare ◽  
Vasant D. Barhate
Keyword(s):  
Aqueous Solution ◽  
Schiff Base ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Maximum Absorption ◽  
Ratio Method ◽  
Pharmaceutical Samples ◽  
Mole Ratio Method ◽  
Ph Range

Objective: A simple spectrophotometric method has been developed for the determination of Iron (III) by using Schiff base 2-[(2-hydroxyphenylimino) methyl]-4-nitrophenol [HPIMNP].Methods: HPIMNP extracts Fe (III) quantitatively (99.95%) into chloroform from an aqueous solution of pH range 4.0-6.0.Results: The chloroform extracts show maximum absorption at 510 nm (λ max). Beer’s Law is obeyed over the Fe (III) concentration range of 0.5 to 20.0 µg/ml. The Molar absorptivity and Sandell’s sensitivity for Fe–HPIMNP system is 5000 L mol ˉ1 cmˉ1 and 0.011 µg cmˉ2respectively. The composition of extracted species is found to be 1: 3 [Fe-HPIMNP] by Job’s continuous variation and Mole-ratio method. Interference by various ions has been studied.Conclusion: The proposed method is rapid, sensitive, reproducible and accurate and it has been satisfactory applied for the determination of Iron in Pharmaceutical Samples.

scholarly journals DEVELOPMENT AND VALIDATION OF SPECTROPHOTOMETRIC METHOD FOR THE DETERMINATION OF DPP-4 INHIBITOR, SITAGLIPTIN, IN ITS PHARMACEUTICAL PREPARATIONS

2018 ◽  
Vol 35 (3) ◽  
pp. 45
Author(s):  
C. Bala Sekaran ◽  
A. Prameela Rani
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Amino Group ◽  
Reaction Conditions ◽  
Colored Product ◽  
Primary Amino ◽  
Development And Validation

A simple, sensitive and reproducible spectrophotometric method was developed for the determination of sitagliptin phosphate in bulk and in pharmaceutical formulations. The proposed method is based on condensation of the primary amino group of sitagliptin phosphate with acetyl acetone and formaldehyde producing a yellow colored product, which is measured spectrophotometrically at 430nm. The color was stable for about 1 hour. Beer’s law is obeyed over a concentration range of 5-25 μg/ml. The apparent molar absorptivity and Sandell sensitivity values are 1.067 x 104 Lmol-1cm-1 and 0.0471 μgcm-2 respectively. All the variables were studied to optimize the reaction conditions. No interference was observed in the presence of common pharmaceutical excipients. The validity of the method was tested by analyzing sitagliptin phosphate in its pharmaceutical preparations. Good recoveries were obtained. The developed method was successfully employed for the determination of sitagliptin phosphate in various pharmaceutical preparations.

scholarly journals Novel Spectrophotometric Methods for the Determination of Selegiline Hydrochloride in Bulk and Its Pharmaceutical Preparation

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Kumble Divya ◽  
Badiadka Narayana
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Preparation ◽  
Coupling Reaction ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Colored Product ◽  
Optimum Reaction ◽  
Optimum Reaction Condition

A simple and highly selective spectrophotometric method has been developed for the determination of selegiline hydrochloride in bulk and formulations. Method A is based on the oxidation of 3-methyl-2-benzothiazolinone hydrazone in the presence of ceric ammonium sulphate, followed by its coupling reaction with drug to form a colored product having λmax of 629 nm. Method B is based on the coupling reaction of drug with 4-aminoantipyrine to give a new ligand that reacts with copper(II) to give intense bluish red colored chelate which is measured at 539 nm. Beer’s law is obeyed in the range of 10.00–85.00 μg mL−1 with molar absorptivity of 0.98×104 for method A and 20.00–120.00 μg mL−1 with molar absorptivity of 0.94×104 for method B. The optimum reaction condition and the analytical parameters are evaluated. The results obtained indicate that the methods are free from interference of the ingredients; thus they are successfully applied to pharmaceutical formulations.

scholarly journals Simple UV Spectrophotometric Determination of Rosuvastatin Calcium in Pure Form and in Pharmaceutical Formulations

2009 ◽  
Vol 6 (1) ◽  
pp. 89-92 ◽  
Author(s):  
Alka Gupta ◽  
P. Mishra ◽  
K. Shah
Keyword(s):  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Pure Form ◽  
Ultraviolet Region ◽  
Rosuvastatin Calcium ◽  
Sensitive Spectrophotometric Method

A new, simple and sensitive spectrophotometric method in ultraviolet region has been developed for the determination of rosuvastatin calcium in bulk and in pharmaceutical formulations. Rosuvastatin exhibits absorption maxima at 244 nm with apparent molar absorptivity of 7.2345 ×104L/mol.cm in methanol. Beer’s law was found to be obeyed in the concentration range of 2-18 µg/mL. The method is accurate, precise and economical. This method is extended to pharmaceutical preparations. In this method, there is no interference from any common pharmaceutical additives and diluents. Results of the analysis were validated statistically and by recovery studies

scholarly journals Simple UV Spectrophotometric Determination of Duloxetine Hydrochloride in Bulk and in Pharmaceutical Formulations

2010 ◽  
Vol 7 (3) ◽  
pp. 785-788 ◽  
Author(s):  
Mohammad Yunoos ◽  
D. Gowri Sankar ◽  
B. Pragati Kumar ◽  
Shahul Hameed ◽  
Azmath Hussain
Keyword(s):  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Ultraviolet Region ◽  
Duloxetine Hydrochloride ◽  
Beer’S Law ◽  
Sensitive Spectrophotometric Method

A new, simple and sensitive spectrophotometric method in ultraviolet region has been developed for the determination of duloxetine hydrochloride in bulk and in pharmaceutical formulations. Duloxetine hydrochloride exhibits absorption maxima at 288 nm with apparent molar absorptivity of 0.97x104L/mol.cm in 0.1 N HCL. Beer's law was found to be obeyed in the concentration range of 5-30 μg/mL. The method is accurate, precise and economical. The proposed method has been applied successfully for the analysis of the drug in pure and in its capsule dosage forms. In this method, there is no interference from any common pharmaceutical additives and diluents. Results of the analysis were validated statistically and by recovery studies.

Extractive Spectrophotometric Method for the Determination of Glibenclamide by Ion-Pair Complex in Pure Form and Pharmaceutical Formulation

2019 ◽  
Vol 9 (o3) ◽  
Author(s):  
RUAA MUAYAD MAHMOOD ◽  
HAMSA MUNAM YASSEN ◽  
SAMAR , NAJWA ISSAC ABDULLA AHMED DARWEESH ◽  
NAJWA ISSAC ABDULLA
Keyword(s):  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Ion Pair ◽  
Pharmaceutical Formulation ◽  
Ratio Method ◽  
Colored Complex ◽  
Colored Product ◽  
Method Of Continuous Variation ◽  
Job's Method

Simple, rapid and sensitive extractive spectrophotometric method is presented for the determination of glibenclamide (Glb) based on the formation of ion-pair complex between the Glb and anionic dye, methyl orange (MO) at pH 4. The yellow colored complex formed was quantitatively extracted into dichloromethane and measured at 426 nm. The colored product obeyed Beer’s law in the concentration range of (0.5-40) μg.ml-1. The value of molar absorptivity obtained from Beer’s data was found to be 31122 L.mol-1.cm-1, Sandell’s sensitivity value was calculated to be 0.0159 μg.cm-2, while the limits of detection (LOD) and quantification (LOQ) were found to be 0.1086 and 0.3292 μg.ml-1, respectively. The stoichiometry of the complex created between the Glb and MO was 1:1 as determined via Job’s method of continuous variation and mole ratio method. The method was successfully applied for the analysis of pharmaceutical formulation.

scholarly journals Spectrophotometric determination of metoclopramide hydrochloride in pharmaceutical tablets, by diazotization-coupling method with 1-naphthol as the coupling agent

2010 ◽  
Vol 7 (1) ◽  
pp. 704-712
Author(s):  
Baghdad Science Journal
Keyword(s):  
Detection Limit ◽  
Azo Dye ◽  
Diazonium Salt ◽  
Molar Absorptivity ◽  
British Pharmacopoeia ◽  
Pharmaceutical Tablets ◽  
Hydrochloric Acid Medium ◽  
Metoclopramide Hydrochloride ◽  
Sensitive Spectrophotometric Method

Simple, rapid and sensitive spectrophotometric method was proposed for the analysis of metoclopramide hydrochloride (MPH) in pure form as well as in pharmaceutical tablets. The method is based on the diazotization reaction of MPH with sodium nitrite in hydrochloric acid medium to form diazonium salt, which is coupled with 1-naphthol in sodium hydroxide medium to form azo dye, showing absorption maxima at 550 nm. Beer’s law is obeyed in the concentration range of 0.4 – 18 µg mL-1 of MPH with detection limit 0.5448 µg mL-1. The molar absorptivity and Sandell’s sensitivity are 3.4969 × 104 L mol-1 cm-1 and 0.0101 µg cm-2, respectively. The method was successfully applied to the determination of MPH in pharmaceutical tablets without any interference from common excipients used as additives in tablets. The results agree favorably with the official British Pharmacopoeia method.

scholarly journals Spectrophotometric determination of phosphorus in coal and coal ash using bismuth-phosphomobybdate complex

2003 ◽  
Vol 68 (1) ◽  
pp. 65-73 ◽  
Author(s):  
Randjel Mihajlovic ◽  
Natasa Ignjatovic ◽  
Marija Todorovic ◽  
Ivanka Holclajtner-Antunovic ◽  
Vesna Kaljevic
Keyword(s):  
Aqueous Solution ◽  
Ascorbic Acid ◽  
Acid Medium ◽  
Spectrophotometric Method ◽  
Methyl Ketone ◽  
Coal Ash ◽  
Molar Absorptivity ◽  
Stable Complex ◽  
Tolerance Limits

A modified spectrophotometric method using the bismuth phosphomolybdate complex for the determination of phosphorus in coal and coal ash is suggested. Bismuth together with phosphate and molybdate forms a very stable complex in acid medium which turns blue ("molibdenum blue") by reduction with ascorbic acid. The apparent molar absorptivity of PBiMo is 1.66x104 dm3 mol-1cm-1 at 720 nm and 2.10x104 dm3 mol-1cm-1 at 670 nm isobutyl methyl ketone (MIBK). Interference caused by the ions present are within the tolerance limits (?2 %). Beer?s law is obeyed in the for concentration range to 0.6 ?g/mL (aqueous solution) and to 1.2 ?g/mL P (MIBK). The sensitivity of the proposed method is 0.0078 ?g/mL (aqueous solution) and 0.0066 ?g/mL (MIBK).

Sign in / Sign up

Export Citation Format

Share Document