Quaternary compound incised valleys of the Roussillon coast (SE France): correlation of seismic data with core data

2010 ◽  
Vol 181 (2) ◽  
pp. 183-196 ◽  
Author(s):  
Michel Tesson ◽  
Caroline Labaune ◽  
Bernard Gensous ◽  
Vincent Delhaye-Prat
Keyword(s):  
Seismic Data ◽  
Coastal Lagoons ◽  
Atlantic Coast ◽  
Shelf Area ◽  
Quaternary Compound ◽  
Seismic Unit ◽  
Data Set ◽  
Barrier Beach ◽  
Incised Valley ◽  
Incised Valleys

Abstract A detailed study of a Pliocene to Quaternary incised-valley system located under the Roussillon coastal area (Gulf of Lion) is carried out by means of a high-resolution seismic data set (coastal lagoons and adjacent shelf area), drill reports and analysis of a cored drill (Leucate SC1) performed in 2007 on the barrier beach in the North of Leucate lagoon. The lowermost surface (S100/S200), correlated with a pebbles level on the Leucate core SC1 (R0), erosionnally overlies pliocene deposits. It is incised by a thalweg 15 m depth and deepens progressively from the coastal plain to the outer shelf and dips under the Quaternary forced regressive wedges. Above this basal surface, the infilling of the incised valley corresponds to the seismic unit U1. The lower part of U1 shows continuous sub-horizontal reflectors and is correlated (Leucate SC1) to marine muds with levels of mud-supported gravels (body B). The upper part of unit U1 comprises seismic erosional reflectors that are almost amalgamated under the barrier beach. It is correlated on the Leucate well to body C comprising coarse levels (gravels and pebbles) alternating with marine muds (lower part) and marine coarse sands (upper part). The upper part of the unit is dated 12900 cal yr B.P. This unit is interpreted as resulting of successive phases of incision and infilling due to base-level changes during Pleistocene glacial and interglacial periods. Coarse levels of sand and gravel corresponding to river stages and sands and muds shelly levels representing marine stages. The overlying units represent post-glacial late transgressive (S650) and highstand (U660, U661, U662) deposits. This system is a rare example of well preserved compound incised valleys correlated offshore with Quaternary lowstand wedges. By comparison, the incised valleys along the Atlantic coast of France are “simple” incised valleys where only the last episode of incision/infilling is observable. The Quaternary “compound” incised valleys cited in the literature represent examples of the fluvial part of incised systems, whereas the Languedoc-Roussillon incised valleys probably correspond to estuary or embayment, successively reoccupied during the various Quaternary eustatic cycles. Tectonics is the main factor controlling the depositional stratigraphic architecture. The studied area is located at the hinge point between continental uplift and marine subsidence and favoured the preservation of successive phases of erosion/infilling. The geometry of the Pliocene deposits has also an impact on the shape and orientation of the buried paleovalleys.

Integrated geological and geophysical interpretation case study, and Lamé rock parameter extractions using AVO analysis on the Blackfoot 3C‐3D seismic data, southern Alberta, Canada

Geophysics ◽  
2002 ◽  
Vol 67 (1) ◽  
pp. 27-37 ◽  
Author(s):  
Jocelyn Dufour ◽  
Jason Squires ◽  
William N. Goodway ◽  
Andy Edmunds ◽  
Ian Shook
Keyword(s):  
Cross Sections ◽  
Seismic Data ◽  
Oil And Gas ◽  
Well Log ◽  
Amplitude Variation With Offset ◽  
Incised Valley ◽  
Geophysical Interpretation ◽  
Porous Sandstone ◽  
Incised Valleys ◽  
Geological Facies

Blackfoot field, southeast of Calgary, Alberta, Canada, has produced oil and gas from a Glauconitic compound incised‐valley system. The Glauconitic compound incised valley has three cycles of incision and valley fill: lower, lithic, and upper incised valleys. The upper and lower incised valleys are the main reservoirs. The geophysical interpretation of compressional PP‐seismic data resulted in the definition of the compound‐valley extent, and in the mapping of the upper and lower incised valleys. A stratigraphic well‐log template was built using the most significant lithological information and well logs. To integrate both geological and geophysical interpretations, the well log cross‐sections and corresponding depth‐converted seismic were superimposed. Furthermore, a detailed geological facies interpretation of the upper and lower incised valleys was undertaken and incorporated. A good correlation was found between the interpreted geological facies and the seismic data response. Information about the nature of the fill within the compound valley was gained from the integration of the PP‐ and PS‐wave interpretations. However, this is limited to Vp/Vs analyses on given intervals. Amplitude‐variation‐with‐offset analysis of the PP‐data was run to discriminate lithology and pore‐fluid saturates. The products of the Lamé rock parameters, incompressibility (λ) and rigidity (μ), with density (ρ) were extracted from seismic inversions for P‐ and S‐impedances. The extraction of λ ρ and μρ showed the presence of gas‐bearing porous sandstone within the Glauconitic incised‐valley system.

scholarly journals Imaging of shallow structures around Küçükçekmece Lake in Istanbul land area with high resolution geophysical data.

2021 ◽  
Author(s):  
Hakan Alp ◽  
Okan Tezel ◽  
Denizhan Vardar ◽  
Yeliz İşcan Alp
Keyword(s):  
High Resolution ◽  
Cross Sections ◽  
Seismic Data ◽  
Active Faults ◽  
Structural Features ◽  
Shelf Area ◽  
Land Area ◽  
Seismic Section ◽  
Data Set ◽  
Well Data

Abstract Küçükçekmece Lake and surrounding land area play an important role to understand the active tectonism of the southern land area of Istanbul. This study gives the results of a geophysical survey to understand the structural features of the study area. We collected geo-electrical data on the surrounding Küçükçekmece Lake. Totally 14 different VES values were inverted and evaluated variation of resistivity with depth. Additionally, the obtained apparent resistivity cross-sections for 3 profiles of VES points. All of them are interpreted considering geological well data from the study area and previous geophysical studies, which included especially high resolution shallow seismic data and chirp seismic data from the lake and shelf area in the Sea of Marmara close to the lake. The resistivity sections and inverted VES data show that faults cut the recent units and also cause resistivity changes in these units in the land area. These faults are consistent with the orientation of active faults observed from the seismic section on the lake and deforming the lake floor. This data set can be given as geophysical evidence for the existence of faults in the Istanbul land area.

Regularization and datuming of seismic data by weighted, damped least squares

Geophysics ◽  
2006 ◽  
Vol 71 (5) ◽  
pp. U67-U76 ◽  
Author(s):  
Robert J. Ferguson
Keyword(s):  
Least Squares ◽  
Seismic Data ◽  
Synthetic Data ◽  
Real Data ◽  
Structural Data ◽  
Irregular Sampling ◽  
Data Set ◽  
Near Surface ◽  
Damped Least Squares ◽  
Wavefield Extrapolation

The possibility of improving regularization/datuming of seismic data is investigated by treating wavefield extrapolation as an inversion problem. Weighted, damped least squares is then used to produce the regularized/datumed wavefield. Regularization/datuming is extremely costly because of computing the Hessian, so an efficient approximation is introduced. Approximation is achieved by computing a limited number of diagonals in the operators involved. Real and synthetic data examples demonstrate the utility of this approach. For synthetic data, regularization/datuming is demonstrated for large extrapolation distances using a highly irregular recording array. Without approximation, regularization/datuming returns a regularized wavefield with reduced operator artifacts when compared to a nonregularizing method such as generalized phase shift plus interpolation (PSPI). Approximate regularization/datuming returns a regularized wavefield for approximately two orders of magnitude less in cost; but it is dip limited, though in a controllable way, compared to the full method. The Foothills structural data set, a freely available data set from the Rocky Mountains of Canada, demonstrates application to real data. The data have highly irregular sampling along the shot coordinate, and they suffer from significant near-surface effects. Approximate regularization/datuming returns common receiver data that are superior in appearance compared to conventional datuming.

Stochastic inversion of pressure and saturation changes from time-lapse AVO data

Geophysics ◽  
2006 ◽  
Vol 71 (5) ◽  
pp. C81-C92 ◽  
Author(s):  
Helene Hafslund Veire ◽  
Hilde Grude Borgos ◽  
Martin Landrø
Keyword(s):  
Stochastic Model ◽  
Seismic Data ◽  
Synthetic Data ◽  
Time Lapse ◽  
Bayesian Framework ◽  
Reservoir Modeling ◽  
Data Set ◽  
The North ◽  
Fluid Saturation ◽  
Likelihood Model

Effects of pressure and fluid saturation can have the same degree of impact on seismic amplitudes and differential traveltimes in the reservoir interval; thus, they are often inseparable by analysis of a single stacked seismic data set. In such cases, time-lapse AVO analysis offers an opportunity to discriminate between the two effects. We quantify the uncertainty in estimations to utilize information about pressure- and saturation-related changes in reservoir modeling and simulation. One way of analyzing uncertainties is to formulate the problem in a Bayesian framework. Here, the solution of the problem will be represented by a probability density function (PDF), providing estimations of uncertainties as well as direct estimations of the properties. A stochastic model for estimation of pressure and saturation changes from time-lapse seismic AVO data is investigated within a Bayesian framework. Well-known rock physical relationships are used to set up a prior stochastic model. PP reflection coefficient differences are used to establish a likelihood model for linking reservoir variables and time-lapse seismic data. The methodology incorporates correlation between different variables of the model as well as spatial dependencies for each of the variables. In addition, information about possible bottlenecks causing large uncertainties in the estimations can be identified through sensitivity analysis of the system. The method has been tested on 1D synthetic data and on field time-lapse seismic AVO data from the Gullfaks Field in the North Sea.

Application of waveform tomography to a crooked-line 2D land seismic data set

Geophysics ◽  
2015 ◽  
Vol 80 (5) ◽  
pp. B115-B129 ◽  
Author(s):  
Rie Kamei ◽  
Takayuki Miyoshi ◽  
R. Gerhard Pratt ◽  
Mamoru Takanashi ◽  
Shogo Masaya
Keyword(s):  
Seismic Data ◽  
Data Set ◽  
Waveform Tomography

Sparse reflectivity inversion for nonstationary seismic data with surface-related multiples: Numerical and field-data experiments

Geophysics ◽  
2017 ◽  
Vol 82 (3) ◽  
pp. R199-R217 ◽  
Author(s):  
Xintao Chai ◽  
Shangxu Wang ◽  
Genyang Tang
Keyword(s):  
Seismic Data ◽  
Resolution Enhancement ◽  
Synthetic Data ◽  
Data Sets ◽  
Data Set ◽  
Anelastic Attenuation ◽  
Seismic Resolution ◽  
Text Filtering ◽  
The Stability ◽  
Reflectivity Inversion

Seismic data are nonstationary due to subsurface anelastic attenuation and dispersion effects. These effects, also referred to as the earth’s [Formula: see text]-filtering effects, can diminish seismic resolution. We previously developed a method of nonstationary sparse reflectivity inversion (NSRI) for resolution enhancement, which avoids the intrinsic instability associated with inverse [Formula: see text] filtering and generates superior [Formula: see text] compensation results. Applying NSRI to data sets that contain multiples (addressing surface-related multiples only) requires a demultiple preprocessing step because NSRI cannot distinguish primaries from multiples and will treat them as interference convolved with incorrect [Formula: see text] values. However, multiples contain information about subsurface properties. To use information carried by multiples, with the feedback model and NSRI theory, we adapt NSRI to the context of nonstationary seismic data with surface-related multiples. Consequently, not only are the benefits of NSRI (e.g., circumventing the intrinsic instability associated with inverse [Formula: see text] filtering) extended, but also multiples are considered. Our method is limited to be a 1D implementation. Theoretical and numerical analyses verify that given a wavelet, the input [Formula: see text] values primarily affect the inverted reflectivities and exert little effect on the estimated multiples; i.e., multiple estimation need not consider [Formula: see text] filtering effects explicitly. However, there are benefits for NSRI considering multiples. The periodicity and amplitude of the multiples imply the position of the reflectivities and amplitude of the wavelet. Multiples assist in overcoming scaling and shifting ambiguities of conventional problems in which multiples are not considered. Experiments using a 1D algorithm on a synthetic data set, the publicly available Pluto 1.5 data set, and a marine data set support the aforementioned findings and reveal the stability, capabilities, and limitations of the proposed method.

scholarly journals Time-Lapse Seismic Monitoring of Onshore Reservoirs in Niger Delta, Field ‘K’ as a Case Study

2017 ◽  
Vol 1 (1) ◽  
pp. 23-27 ◽  
Author(s):  
A. Ogbamikhumi ◽  
T. Tralagba ◽  
E. E. Osagiede
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Niger Delta ◽  
Rock Physics ◽  
Time Lapse ◽  
Seismic Survey ◽  
Impedance Change ◽  
Data Set ◽  
Reservoir Fluid ◽  
4D Seismic

Field ‘K’ is a mature field in the coastal swamp onshore Niger delta, which has been producing since 1960. As a huge producing field with some potential for further sustainable production, field monitoring is therefore important in the identification of areas of unproduced hydrocarbon. This can be achieved by comparing production data with the corresponding changes in acoustic impedance observed in the maps generated from base survey (initial 3D seismic) and monitor seismic survey (4D seismic) across the field. This will enable the 4D seismic data set to be used for mapping reservoir details such as advancing water front and un-swept zones. The availability of good quality onshore time-lapse seismic data for Field ‘K’ acquired in 1987 and 2002 provided the opportunity to evaluate the effect of changes in reservoir fluid saturations on time-lapse amplitudes. Rock physics modelling and fluid substitution studies on well logs were carried out, and acoustic impedance change in the reservoir was estimated to be in the range of 0.25% to about 8%. Changes in reservoir fluid saturations were confirmed with time-lapse amplitudes within the crest area of the reservoir structure where reservoir porosity is 0.25%. In this paper, we demonstrated the use of repeat Seismic to delineate swept zones and areas hit with water override in a producing onshore reservoir.

Integrated prestack depth migration of vertical seismic profile and surface seismic data from the Rocky Mountain Foothills of southern Alberta, Canada

Geophysics ◽  
2003 ◽  
Vol 68 (6) ◽  
pp. 1782-1791 ◽  
Author(s):  
M. Graziella Kirtland Grech ◽  
Don C. Lawton ◽  
Scott Cheadle
Keyword(s):  
Seismic Data ◽  
Rocky Mountain ◽  
Velocity Model ◽  
Seismic Profile ◽  
Vertical Seismic Profile ◽  
Prestack Depth Migration ◽  
Data Set ◽  
Depth Migration ◽  
Southern Alberta ◽  
Vsp Data

We have developed an anisotropic prestack depth migration code that can migrate either vertical seismic profile (VSP) or surface seismic data. We use this migration code in a new method for integrated VSP and surface seismic depth imaging. Instead of splicing the VSP image into the section derived from surface seismic data, we use the same migration algorithm and a single velocity model to migrate both data sets to a common output grid. We then scale and sum the two images to yield one integrated depth‐migrated section. After testing this method on synthetic surface seismic and VSP data, we applied it to field data from a 2D surface seismic line and a multioffset VSP from the Rocky Mountain Foothills of southern Alberta, Canada. Our results show that the resulting integrated image exhibits significant improvement over that obtained from (a) the migration of either data set alone or (b) the conventional splicing approach. The integrated image uses the broader frequency bandwidth of the VSP data to provide higher vertical resolution than the migration of the surface seismic data. The integrated image also shows enhanced structural detail, since no part of the surface seismic section is eliminated, and good event continuity through the use of a single migration–velocity model, obtained by an integrated interpretation of borehole and surface seismic data. This enhanced migrated image enabled us to perform a more robust interpretation with good well ties.

Common-focus point-based target-oriented imaging approach for continuous seismic reservoir monitoring

Geophysics ◽  
2018 ◽  
Vol 83 (4) ◽  
pp. M41-M48 ◽  
Author(s):  
Hongwei Liu ◽  
Mustafa Naser Al-Ali
Keyword(s):  
Seismic Data ◽  
Rock Physics ◽  
Time Lapse ◽  
Velocity Estimation ◽  
Estimation Methods ◽  
Data Sets ◽  
Data Set ◽  
Velocity Models ◽  
Reservoir Monitoring ◽  
Focus Point

The ideal approach for continuous reservoir monitoring allows generation of fast and accurate images to cope with the massive data sets acquired for such a task. Conventionally, rigorous depth-oriented velocity-estimation methods are performed to produce sufficiently accurate velocity models. Unlike the traditional way, the target-oriented imaging technology based on the common-focus point (CFP) theory can be an alternative for continuous reservoir monitoring. The solution is based on a robust data-driven iterative operator updating strategy without deriving a detailed velocity model. The same focusing operator is applied on successive 3D seismic data sets for the first time to generate efficient and accurate 4D target-oriented seismic stacked images from time-lapse field seismic data sets acquired in a [Formula: see text] injection project in Saudi Arabia. Using the focusing operator, target-oriented prestack angle domain common-image gathers (ADCIGs) could be derived to perform amplitude-versus-angle analysis. To preserve the amplitude information in the ADCIGs, an amplitude-balancing factor is applied by embedding a synthetic data set using the real acquisition geometry to remove the geometry imprint artifact. Applying the CFP-based target-oriented imaging to time-lapse data sets revealed changes at the reservoir level in the poststack and prestack time-lapse signals, which is consistent with the [Formula: see text] injection history and rock physics.

Seismic resolution enhancement in shale-oil reservoirs

Geophysics ◽  
2018 ◽  
Vol 83 (5) ◽  
pp. B281-B287 ◽  
Author(s):  
Xiwu Liu ◽  
Fengxia Gao ◽  
Yuanyin Zhang ◽  
Ying Rao ◽  
Yanghua Wang
Keyword(s):  
Seismic Data ◽  
Resolution Enhancement ◽  
Oil Reservoirs ◽  
Inversion Method ◽  
Shale Oil ◽  
Data Set ◽  
Extension Method ◽  
Seismic Resolution ◽  
Full Band ◽  
Shale Oil Reservoirs

We developed a case study of seismic resolution enhancement for shale-oil reservoirs in the Q Depression, China, featured by rhythmic bedding. We proposed an innovative method for resolution enhancement, called the full-band extension method. We implemented this method in three consecutive steps: wavelet extraction, filter construction, and data filtering. First, we extracted a constant-phase wavelet from the entire seismic data set. Then, we constructed the full-band extension filter in the frequency domain using the least-squares inversion method. Finally, we applied the band extension filter to the entire seismic data set. We determined that this full-band extension method, with a stretched frequency band from 7–70 to 2–90 Hz, may significantly enhance 3D seismic resolution and distinguish reflection events of rhythmite groups in shale-oil reservoirs.

Sign in / Sign up

Export Citation Format

Share Document