Cyclic Water Injection Improves Oil Production in Carbonate Reservoir

2008 ◽  
Author(s):  
Leonid M. Surguchev ◽  
Nils Harald Giske ◽  
Lars Kollbotn ◽  
Anton Shchipanov
Keyword(s):  
Water Injection ◽  
Oil Production ◽  
Carbonate Reservoir

Pulling the Production: A New Way of Looking into Brown Field Reservoirs

2021 ◽  
Author(s):  
A.. Ghosh ◽  
J.. Zacharia ◽  
V.. Kumar ◽  
R.. S. Chauhan ◽  
R.. Santhosh Kumar ◽  
...  
Keyword(s):  
Promising Result ◽  
Water Injection ◽  
Qualitative Evaluation ◽  
Oil Production ◽  
Integrated Approach ◽  
Carbonate Reservoir ◽  
Added Value ◽  
High Permeability ◽  
Horizontal Drain ◽  
Water Cut

Abstract One of the major brownfields in offshore India was producing for three decades from main carbonate reservoirs of the Eocene and Oligocene age. Average production of this brownfield is approximately 11,000 barrels of oil per day (BOPD). To maintain the declining reservoir pressure, the field has been under active water injection for more than two decades. However, being a complex carbonate reservoir with high textural heterogeneity, the water-front movement is not very well understood and monitored. To increase the oil production, the operator started drilling horizontal drain-holes from the platforms and has adopted a conventional perforated and blind tubing combination as a completion strategy. However, it was found that wells were performing poorly with very high water cut. An integrated and comprehensive petrophysical workflow was applied that used data analysis and the added value of advanced 3D acoustic data in combination with nuclear magnetic resonance (NMR) data to provide a rapid realistic solution to avoid such high watercut through optimizing the completion strategy. This led to a production gain in this offshore field, which was underperforming as per earlier predictions and expectations. Conventional well-log based qualitative evaluation for horizontal segmentation strategy was rejected in favor of an integrated approach for lateral reservoir facies delineation. Lateral petrophysical property characterization was carried out through quick integration of NMR pore-size driven facies analysis, advanced acoustic radial profiling, anisotropy, and Stoneley analysis. Permeability profiling along the horizontal drain-hole section using NMR and acoustics provided critical insight. Those were integrated to avoid potential high permeability conduits of thief zones for water breakthrough. A rock-quality index was derived to optimize the completion strategy soon after the logging, even preceding the rig-down of the acquisition runs and lowering of the completion. Zones with higher skin, deeper formation damage, and lower rock-mechanical properties were avoided for efficient swell-packer placements. The well started producing and continued production with only 10% water cut along with 450 barrels of oil compared to an average 90% watercut and 100 barrels of oil from the other wells of the same platform, which used the older nonoptimized completion strategy. Based on the promising result for the first well, the same workflow was used for two similar wells of other two different platforms inthe same field, which also resulted in similar production with enhanced oil production and reduced water cut. The study using the rapid integrated evaluation workflow established efficient zonal isolation of high permeability thief zones with accuracy for timely optimization of horizontal well segmentation, which assisted in pulling higher production in this brownfield by reducing unwanted water production.

60 Years Field Performance Data-Driven Analytics to Generate Updated Waterflood Field Development Plan in a North Kuwait Giant Carbonate Reservoir

2021 ◽  
Author(s):  
Basel AL-Otaibi ◽  
Issa Abu Shiekah ◽  
Manish Kumar Jha ◽  
Gerbert de Bruijn ◽  
Peter Male ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Oil Production ◽  
Horizontal Wells ◽  
Carbonate Reservoir ◽  
Development Plan ◽  
Data Driven ◽  
Water Flooding ◽  
Field Development ◽  
The Impact

Abstract After 40 years of depletion drive, a mature, giant and multi-layer carbonate reservoir is developed through waterflooding. Oil production, sustained through infill drilling and new development patterns, is often associated with increasingly higher water production compared to earlier development phases. A field re-development plan has been established to alleviate the impact of reservoir heterogeneities on oil recovery, driven by the analysis of the historical performance of production and injection of a range of well types. The field is developed through historical opportunistic development concepts utilizing evolving technology trends. Therefore, the field has initially wide spacing vertical waterflooding patterns followed by horizontal wells, subjected to seawater or produced water injection, applying a range of wells placement or completion technologies and different water injection operating strategies. Systematic categorization, grouping and analyzing of a rich data set of wells performance have been complemented and integrated with insights from coarse full field and conceptual sector dynamic modeling activities. This workflow efficiently paved the way to optimize the field development aiming for increased oil recovery and cost saving opportunities. Integrated analysis of evolving historical development decisions revealed and ranked the primary subsurface and operational drivers behind the limited sweep efficiency and increased watercut. This helped mapping the impact of fundamental subsurface attributes from well placement, completion, or water injection strategies. Excellent vertical wells performance during the primary depletion and the early stage of water flooding was slowly outperformed by a more sustainable horizontal well production and injection strategy. This is consistent with a conceptual model in which the reservoir is dominated by extensive high conductive features that contributed in the early life of the field to good oil production before becoming the primary source of premature water breakthrough after a limited fraction of pore volume water was injected. The next level of analysis provided actual field evidence to support informed decisions to optimize the front runner horizontal wells development concept to cover wells length, orientation, vertical placement in the stratigraphy, spacing, pattern strategy and completion design. The findings enabled delivering updated field development plan covering the field life cycle to sustain and increase field oil production through adding ~ 200 additional wells and introducing more structured water flooding patterns in addition to establishing improved wells reservoir management practices. This integrated study manifests the power, efficiency and value from data driven analysis to capture lessons learned from evolving wells and development concepts applied in a complex brown field over six decades. The workflow enabled the delivery of an updated field development plan and production forecasts within a year through utilizing data analytics to compensate for the recognized limitations of subsurface models in addition to providing input to steer the more time-consuming modeling activities.

scholarly journals Injection-production optimization of carbonate reservoir based on an inter-well connectivity model

2021 ◽  
pp. 014459872199465
Author(s):  
Yuhui Zhou ◽  
Sheng Lei ◽  
Xuebiao Du ◽  
Shichang Ju ◽  
Wei Li
Keyword(s):  
History Matching ◽  
Water Injection ◽  
Field Application ◽  
Carbonate Reservoir ◽  
Production Optimization ◽  
Oil Field ◽  
Carbonate Reservoirs ◽  
Utilization Rate ◽  
Production Volume ◽  
Connectivity Model

Carbonate reservoirs are highly heterogeneous. During waterflooding stage, the channeling phenomenon of displacing fluid in high-permeability layers easily leads to early water breakthrough and high water-cut with low recovery rate. To quantitatively characterize the inter-well connectivity parameters (including conductivity and connected volume), we developed an inter-well connectivity model based on the principle of inter-well connectivity and the geological data and development performance of carbonate reservoirs. Thus, the planar water injection allocation factors and water injection utilization rate of different layers can be obtained. In addition, when the proposed model is integrated with automatic history matching method and production optimization algorithm, the real-time oil and water production can be optimized and predicted. Field application demonstrates that adjusting injection parameters based on the model outputs results in a 1.5% increase in annual oil production, which offers significant guidance for the efficient development of similar oil reservoirs. In this study, the connectivity method was applied to multi-layer real reservoirs for the first time, and the injection and production volume of injection-production wells were repeatedly updated based on multiple iterations of water injection efficiency. The correctness of the method was verified by conceptual calculations and then applied to real reservoirs. So that the oil field can increase production in a short time, and has good application value.

Pilot Project Evaluating WAG Efficiency for Carbonate Reservoir in Eastern Siberia

2021 ◽  
Author(s):  
Valentina Zharko ◽  
Dmitriy Burdakov
Keyword(s):  
Oil Recovery ◽  
Gas Injection ◽  
Oil Production ◽  
Pilot Project ◽  
Carbonate Reservoir ◽  
Recovery Factor ◽  
Eastern Siberia ◽  
Water Cut ◽  
Wag Injection ◽  
Injection Rates

Abstract The paper presents the results of a pilot project implementing WAG injection at the oilfield with carbonate reservoir, characterized by low efficiency of traditional waterflooding. The objective of the pilot project was to evaluate the efficiency of this enhanced oil recovery method for conditions of the specific oil field. For the initial introduction of WAG, an area of the reservoir with minimal potential risks has been identified. During the test injections of water and gas, production parameters were monitored, including the oil production rates of the reacting wells and the water and gas injection rates of injection wells, the change in the density and composition of the produced fluids. With first positive results, the pilot area of the reservoir was expanded. In accordance with the responses of the producing wells to the injection of displacing agents, the injection rates were adjusted, and the production intensified, with the aim of maximizing the effect of WAG. The results obtained in practice were reproduced in the simulation model sector in order to obtain a project curve characterizing an increase in oil recovery due to water-alternating gas injection. Practical results obtained during pilot testing of the technology show that the injection of gas and water alternately can reduce the water cut of the reacting wells and increase overall oil production, providing more efficient displacement compared to traditional waterflooding. The use of WAG after the waterflooding provides an increase in oil recovery and a decrease in residual oil saturation. The water cut of the produced liquid decreased from 98% to 80%, an increase in oil production rate of 100 tons/day was obtained. The increase in the oil recovery factor is estimated at approximately 7.5% at gas injection of 1.5 hydrocarbon pore volumes. Based on the received results, the displacement characteristic was constructed. Methods for monitoring the effectiveness of WAG have been determined, and studies are planned to be carried out when designing a full-scale WAG project at the field. This project is the first pilot project in Russia implementing WAG injection in a field with a carbonate reservoir. During the pilot project, the technical feasibility of implementing this EOR method was confirmed, as well as its efficiency in terms of increasing the oil recovery factor for the conditions of the carbonate reservoir of Eastern Siberia, characterized by high water cut and low values of oil displacement coefficients during waterflooding.

Identification of Micro Fractures in Cretaceous Bioclastic Limestone in Iraq and Its Influence on Development of Reservoirs

2021 ◽  
Author(s):  
Genjiu Wang ◽  
Dandan Hu ◽  
Qianyao Li
Keyword(s):  
Water Movement ◽  
Rock Fracture ◽  
Water Injection ◽  
Three Dimensional ◽  
Carbonate Reservoir ◽  
Distribution Data ◽  
Fracture Development ◽  
Reservoir Conditions ◽  
Data Volume ◽  
Southern Iraq

Abstract It is generally believed that Cretaceous bioclastic limestone in Mesopotamia basin in central and southern Iraq is a typical porous reservoir with weak fracture development. Therefore, previous studies on the fracture of this kind of reservoir are rare. As a common seepage channel in carbonate rock, fracture has an important influence on single well productivity and waterflooding development of carbonate reservoir. Based on seismic, core and production data, this study analyzes the development characteristics of fractures from various aspects, and discusses the influence of fractures on water injection development of reservoirs. Through special processing of seismic data, it is found that there are a lot of micro fractures in Cretaceous bioclastic limestone reservoir. Most of these micro fractures are filled fractures without conductivity under the original reservoir conditions. However, with the further development of the reservoir, the reservoir pressure, oil-water movement, water injection and other conditions have changed, resulting in the original reservoir conditions of micro fractures with conductivity. The water cut of many production wells in the high part of reservoir rises sharply. In order to describe the three-dimensional spatial distribution of fractures, the core data is used to verify the seismic fracture distribution data volume. After the verification effect is satisfied, the three-dimensional fracture data volume is transformed into the geological model to establish the permeability field including fracture characteristics. The results of numerical simulation show that water mainly flows into the reservoir through high angle micro fractures. Fractures are identified by seismic and fracture model is established to effectively recognize the influence of micro fractures on water injection development in reservoir development process, which provides important guidance for oilfield development of Cretaceous bioclastic limestone reservoir in the central and southern Iraq fields.

scholarly journals Economic Evaluation of Fiscal Regime on EOR Implementation in Indonesia: A Case Study of Low Salinity Water Injection on Field X

2020 ◽  
Vol 9 (1) ◽  
pp. 17-35
Author(s):  
Adityawarman Adityawarman ◽  
Faridh Afdhal Aziz ◽  
Prasandi Abdul Aziz ◽  
Purnomo Yusgiantoro ◽  
Steven Chandra
Keyword(s):  
Sensitivity Analysis ◽  
Net Present Value ◽  
Water Injection ◽  
Oil Production ◽  
Oil Price ◽  
Low Salinity ◽  
Low Salinity Water ◽  
Fiscal Regimes ◽  
Salinity Water ◽  
Low Salinity Water Injection

There are currently two fiscal regimes designated for resource allocation in Indonesia’s upstream oil and gas industry, the Production Sharing Contract Cost Recovery (PSC) and Gross Split. The Gross Split in the form of additional percentage split is designed to encourage contractors to implement Enhanced Oil Recovery (EOR) in mature fields. Low Salinity Water Injection (LSWI) is an emerging EOR technique in which the salinity of the injected water is controlled. It has been proven to be relatively cheaper and has simpler implementations than other EOR options in several countries. This study evaluates the LSWI project’s economy using PSC and Gross Split and then to be compared to conventional waterflooding (WF) project’s economy. There are four cases on Field X that are simulated using a commercial simulator for 5 years. The cases are evaluated under PSC and Gross Split to calculate the project’s economy. The economic indicators that will be evaluated are the Net Present Value (NPV) and sensitivity analysis is also conducted to observe the change of NPV. The parameters for sensitivity analysis are Capital Expenditure (CAPEX), Operating Expenditure (OPEX), Oil Production, and Oil Price. It is found that LSWI implementation using Gross Split is more profitable than PSC. The parameters that affects NPV the most in all PSC cases are the oil production and oil price. On the other hand, in Gross Split cases, the oil production is the parameter that affects NPV the most, followed by oil price. The novelty of this study is in the comparison of project’s economy between WF and LSWI using two different fiscal regimes to see whether Gross Split is more profitable than PSC on EOR implementation, specifically the LSWI at Field X.

Polymer Injection to Unlock Bypassed Oil in a Giant Carbonate Reservoir: Bridging the Gap Between Laboratory and Large Scale Polymer Project

2021 ◽  
Author(s):  
Clement Fabbri ◽  
Haitham Ali Al Saadi ◽  
Ke Wang ◽  
Flavien Maire ◽  
Carolina Romero ◽  
...  
Keyword(s):  
High Salinity ◽  
Water Injection ◽  
Cross Flow ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Laboratory Work ◽  
High Permeability ◽  
Polymer Injection ◽  
Single Well ◽  
Pilot Design

Abstract Polymer flooding has long been proposed to improve sweep efficiency in heterogeneous reservoirs where polymer enhances cross flow between layers and forces water into the low permeability layers, leading to more homogeneous saturation profile. Although this approach could unlock large volumes of by-passed oil in layered carbonate reservoirs, compatibility of polymer solutions with high salinity - high temperature carbonate reservoirs has been hindering polymer injection projects in such harsh conditions. The aim of this paper is to present the laboratory work, polymer injection field test results and pilot design aimed to unlock target tertiary oil recovery in a highly heterogeneous mixed to oil-wet giant carbonate reservoir. This paper focuses on a highly layered limestone reservoir with various levels of cyclicity in properties. This reservoir may be divided in two main bodies, i.e., an Upper zone and a Lower zone with permeability contrast of up to two orders of magnitude. The main part of the reservoir is currently under peripheral and mid-flank water injection. Field observations show that injected water tends to channel quickly through the Upper zone along the high permeability layers and bypass the oil in the Lower zone. Past studies have indicated that this water override phenomenon is caused by a combination of high permeability contrast and capillary forces which counteract gravity forces. In this setting, adequate polymer injection strategy to enhance cross-flow between these zones is investigated, building on laboratory and polymer injection test field results. A key prerequisite for defining such EOR development scenario is to have representative static and dynamic models that captures the geological heterogeneity of this kind of reservoirs. This is achieved by an improved and integrated reservoir characterization, modelling and water injection history matching procedure. The history matched model was used to investigate different polymer injection schemes and resulted in an optimum pilot design. The injection scheme is defined based on dynamic simulations to maximize value, building on results from single-well polymer injection test, laboratory work and on previous published work, which have demonstrated the potential of polymer flooding for this reservoir. Our study evidences the positive impact of polymer propagation at field scale, improving the water-front stability, which is a function of pressure gradient near producer wells. Sensitivities to the position and number of polymer injectors have been performed to identify the best injection configuration, depending on the existing water injection scheme and the operating constraints. The pilot design proposed builds on laboratory work and field monitoring data gathered during single-well polymer injection field test. Together, these elements represent building blocks to enable tertiary polymer recovery in giant heterogeneous carbonate reservoirs with high temperature - high salinity conditions.

Sign in / Sign up

Export Citation Format

Share Document