PiNTAR Gas Lift System: Paving the Way for Automated Field Implementation

2021 ◽  
Author(s):  
Farasdaq Muchibbus Sajjad ◽  
Alvin Derry Wirawan ◽  
Dharmawan Alfian Rachmadi ◽  
Wingky Suganda ◽  
Dany Susanto ◽  
...  

Abstract As oil and gas development in Indonesia is shifting towards offshore environment, automation is essential for reducing operating cost. PHE ONWJ as the biggest oil and gas operator in Indonesia develops an automated field operation for gas lift optimization, called PiNTAR. PHE ONWJ has been operating gas lift wells for almost 40 years. The biggest challenge is how to efficiently conduct the business operations in offshore environment. The current regular operations (for instance production monitoring) are conducted manually in monthly basis. It is time-consuming and requires long time for trouble shooting. PiNTAR is designed by PHE ONWJ by integrating smart signal system that can be operated remotely without having to be physically presence at the site. The system is integrated with SCADA sensors, satellite system and fully electronic transmitter that sends production data and related parameters to PHE ONWJ head office to be analyzed 24/7 and mitigated if necessary. PiNTAR has been implemented on more than 50 wells in PHE ONWJ working areas. PHE ONWJ also provides interactive Graphical User Interface based software for monitoring and production adjustment purposes. Standardization is also performed therefore PiNTAR can be implemented in a wider area, with different gas lift situations. PiNTAR enables operators to quickly diagnose flow irregularities ranging from adjusting injected Gas Liquid Ratio (GLR) to minimize annular flow, modify choke openings, dynamic reallocation of injected gas from multiple well systems, and also allows the team to comprehend a significant amount of flow characteristics in gas lifted wells as measurements are taken in a very small-time frame, ranging from minutes to seconds. PiNTAR also enables automated production test that enables the construction of real time Gas Lift Performance Curve, which reduces operator workload and enables dynamic gas lift optimization. Implementation of PiNTAR also reduces HSSE risks for rope jumping operations in offshore and increases efficiency of fuel and personnel timing in platform. The publication presents a success story of gas lift automated optimization using in-house development from PHE ONWJ called PiNTAR. Significant monetary efficiency as well as production increase has been observed during the implementation, encouraging the company to pursue further field automation efforts.

2000 ◽  
Vol 40 (1) ◽  
pp. 437 ◽  
Author(s):  
W.C. Henry ◽  
A.M. Hyden ◽  
S.L. Williams

Esso Australia Ltd on behalf of the Esso/BHP joint venture, recently completed Australia's first deep- water oil and gas development, Blackback, in 395 m water depth in eastern Bass Strait. Esso used a phased development approach and an innovative development concept to mitigate the effect of reserves uncertainty. The development consists of three wells in daisy-chain formation tied back to the existing Mackerel platform, 23 km distant. The development also used innovative approaches for installation of flexible flowline and umbilical jumpers from the drilling rig, management of hydrates in the production flowline and control system integration.In the same time frame, Esso repaired the failed electro-hydraulic control systems of two 10-year-old subsea wells. The repair program used an innovative approach to fault diagnosis and field work.


Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2610 ◽  
Author(s):  
Shidong Zhou ◽  
Xiaokang Chen ◽  
Chengyuan He ◽  
Shuli Wang ◽  
Shuhua Zhao ◽  
...  

The rapid increasing amount of produced water in the deep-water and ultra-deep-water fields, especially those at their later development stages, increases the risk of the occurrence of hydrates plugging. In order to prevent and remediate the hydrates risks, it is important to understand the hydrate formation, slurry flow, and plugging characteristics and mechanisms under high water cuts conditions. In this paper, experiments with high water cuts ranging from 60–100% were conducted using a high pressure flow loop with observation windows. The whole processes of the hydrate formation, slurry flow and plugging is visually seen and recorded, and has been discussed and explained in detail in this paper. Moreover, it is found that the increasing water cuts shorten the induction time, but increase the volume fraction of hydrates. As the water cuts increase, the flow time of the hydrate slurry decreases, which serves as a critical parameter for the safe operation of the pipeline. In addition, different hypothetical mechanisms have been proposed for the medium and high water cuts conditions. We believe that this research can provide theoretical support for the safe transportation of oil and gas development in the high water cut oilfield.


2019 ◽  
Vol 16 (6) ◽  
pp. 50-59
Author(s):  
O. P. Trubitsina ◽  
V. N. Bashkin

The article is devoted to the consideration of geopolitical challenges for the analysis of geoenvironmental risks (GERs) in the hydrocarbon development of the Arctic territory. Geopolitical risks (GPRs), like GERs, can be transformed into opposite external environment factors of oil and gas industry facilities in the form of additional opportunities or threats, which the authors identify in detail for each type of risk. This is necessary for further development of methodological base of expert methods for GER management in the context of the implementational proposed two-stage model of the GER analysis taking to account GPR for the improvement of effectiveness making decisions to ensure optimal operation of the facility oil and gas industry and minimize the impact on the environment in the geopolitical conditions of the Arctic.The authors declare no conflict of interest


2016 ◽  
Author(s):  
Stephen D. Richardson ◽  
◽  
Lisa J Molofsky ◽  
Ann P. Smith ◽  
Tom E. McHugh ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document