Application of Techniques of Natural Fracture Characterization for Appraisal of Tight Carbonate Reservoirs: A Case Study From Jurassic of Kuwait

2021 ◽  
Author(s):  
Aishah Khalid Abdullah ◽  
Bhaskar Chakrabarti ◽  
Anas Mansor Al-Rukaibi ◽  
Talal Fahad Hadi Al-Adwani ◽  
Khushboo Havelia ◽  
...  
Keyword(s):  
Seismic Attributes ◽  
Carbonate Reservoirs ◽  
Fracture Model ◽  
Fracture Aperture ◽  
Structural Restoration ◽  
Fracture Characterization ◽  
Fracture Porosity ◽  
Tight Carbonate ◽  
Porosity And Permeability ◽  
Sweet Spots

Abstract The State of Kuwait is currently appraising and successfully developing the tight carbonates reservoirs of Jurassic age, which have very low matrix porosity and permeability. These reservoirs are affected by several tectonic events of faulting and folding, resulting in the development of interconnected natural fractures, which provide effective permeability to the reservoirs in form of production sweet spots. The objective of the study was to characterize the natural fractures and identify high permeability sweet spots as being appraisal drilling locations in a discovered field with tight carbonate reservoirs. An integrated approach was undertaken for building a discrete fracture network model by characterizing the developed faulting- and folding-related fractures and combining all subsurface data from multiple domains. The reservoir structure has a doubly plunging anticline at the field level that is affected by several strike-slip faults. The faulting-related fractures were characterized by generating multiple structural seismic attributes, highlighting subsurface discontinuities and fracture corridors. The folding-related fractures were modelled using structural restoration techniques by computing stresses resulting from the anticlinal folding. The fracture model was built in addition to the 3D matrix property model for this tight carbonate reservoir, resulting in a dual-porosity-permeability static model. Analogue data was used to compute fracture aperture and expected fracture porosity and permeability, to identify the sweet spots. Structural seismic attributes such as Ant Tracking and Consistent Dip were successful in highlighting and identifying the fault lineaments and fracture corridors. The seismic discontinuities were validated using the fractures interpreted in the image log data from the predrilled wells before being input into the fracture model. Paleo stresses, derived from structural restoration, were combined with the reservoir facies and geomechanical properties to gain important insight into predicting fractures developed due to folding. Several fracture aperture scenarios were run to capture the uncertainty associated with the computed fracture porosity and permeability. Based on the results, several sweet spots were identified, which were ranked based on their extent and connected volumes of the various permeability cases. Identifying these sweet spots helped make informed decisions regarding well planning and drilling sequence. High-inclination wells aligned parallel to the present-day maximum stress direction were proposed, which would cut across corridors of the predicted open fractures. Through this study, comprehensive fracture characterization and fracture permeability understanding of the tight carbonates in the field under study were successfully achieved. This workflow will be useful in exploratory or appraisal fields with tight carbonate reservoirs.

Using Logging and Seismic Data to Identify Boundaries Between Different OWC Units in a Deepwater Carbonate Reservoirs

2021 ◽  
Author(s):  
Kangxu Ren ◽  
Junfeng Zhao ◽  
Jian Zhao ◽  
Xilong Sun
Keyword(s):  
Seismic Data ◽  
Carbonate Rocks ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Sedimentary Process ◽  
Core Samples ◽  
Tight Carbonate ◽  
Porosity And Permeability ◽  
Seismic Sections ◽  
Parameters Inversion

Abstract At least three very different oil-water contacts (OWC) encountered in the deepwater, huge anticline, pre-salt carbonate reservoirs of X oilfield, Santos Basin, Brazil. The boundaries identification between different OWC units was very important to help calculating the reserves in place, which was the core factor for the development campaign. Based on analysis of wells pressure interference testing data, and interpretation of tight intervals in boreholes, predicating the pre-salt distribution of igneous rocks, intrusion baked aureoles, the silicification and the high GR carbonate rocks, the viewpoint of boundaries developed between different OWC sub-units in the lower parts of this complex carbonate reservoirs had been better understood. Core samples, logging curves, including conventional logging and other special types such as NMR, UBI and ECS, as well as the multi-parameters inversion seismic data, were adopted to confirm the tight intervals in boreholes and to predicate the possible divided boundaries between wells. In the X oilfield, hundreds of meters pre-salt carbonate reservoir had been confirmed to be laterally connected, i.e., the connected intervals including almost the whole Barra Velha Formation and/or the main parts of the Itapema Formation. However, in the middle and/or the lower sections of pre-salt target layers, the situation changed because there developed many complicated tight bodies, which were formed by intrusive diabase dykes and/or sills and the tight carbonate rocks. Many pre-salt inner-layers diabases in X oilfield had very low porosity and permeability. The tight carbonate rocks mostly developed either during early sedimentary process or by latter intrusion metamorphism and/or silicification. Tight bodies were firstly identified in drilled wells with the help of core samples and logging curves. Then, the continuous boundary were discerned on inversion seismic sections marked by wells. This paper showed the idea of coupling the different OWC units in a deepwater pre-salt carbonate play with complicated tight bodies. With the marking of wells, spatial distributions of tight layers were successfully discerned and predicated on inversion seismic sections.

An Improved Hydraulic Fracturing Treatment for Stimulating Tight Organic-Rich Carbonate Reservoirs

SPE Journal ◽  
2020 ◽  
Vol 25 (02) ◽  
pp. 632-645
Author(s):  
Feng Liang ◽  
Yanhui Han ◽  
Hui-Hai Liu ◽  
Rajesh Saini ◽  
Jose I. Rueda
Keyword(s):  
Fluid Flow ◽  
Hydraulic Fracturing ◽  
Elevated Temperatures ◽  
Gas Production ◽  
Carbonate Reservoirs ◽  
Fracture Aperture ◽  
Hydraulic Pressure ◽  
Engineering Process ◽  
Tight Carbonate ◽  
Flow Pathways

Summary Hydraulic fracturing has been widely used in stimulating tight carbonate reservoirs to improve oil and gas production. Improving and maintaining the connectivity between the natural and induced microfractures in the far-field and the primary fracture networks are essential to enhancing the well production rate because these natural and induced unpropped microfractures tend to close after the release of hydraulic pressure during production. This paper provides a conceptual approach for an improved hydraulic fracturing treatment to enhance the well productivity by minimizing the closure of the microfractures in tight carbonate reservoirs and enlarging the fracture aperture. The proposed improved fracturing treatment was to use the mixture of the delayed acid-generating materials along with microproppants in the pad/prepad fluids during the engineering process. The microproppants were used to support the opening of natural or newly induced microfractures. The delayed acid-generating materials were used in this strategy to enlarge the flow pathways within microfractures owing to degradation introduced under elevated temperatures and interaction with the calcite formation. The feasibility of the proposed approach is evaluated by a series of the proof-of-concept laboratory coreflood experiments and numerical modeling results. First, one series of experiments (Experiments 1–3) was designed to investigate the depth of the voids on the fracture surface generated by the solid delayed acid-generating materials under different flow rates of the treatment fluids and different temperatures. This set of tests was conducted on a core plug assembly that was composed of half-core Eagle Ford Sample, half-core hastelloy core plug, and a mixture of solid delayed acid-generating materials [polyglycolic acid (PGA)] along with small-sized proppants sandwiched by two half-cores. Surface profilometer was used to quantify the surface-etched profile before and after coreflood experiments. Test results have shown that PGA materials were able to create voids or dimples on the fracture faces by their degradation under elevated temperature and the chemical reaction between the generated weak acid and the calcite-rich formation. The depth of the voids generated is related to the treatment temperature and the flow rate of the treatment fluids. Experiment 4 was conducted using two half-core splits to quantify the improvement factor of the core permeability due to the treatment with mixed sand and PGA materials. Simulations of fluid flow through proppant assembly (inside of the microfractures) using the discrete element method (DEM)–lattice Boltzmann method (LBM) coupling approach for three different scenarios (14 cases in total) were further conducted to evaluate the fracture permeability and conductivity changes under different situations such as various gaps between proppant particulates and different depths of voids generated on fracture faces: (1) fluid flow in a microfracture without proppant, (2) fluid flow in a microfracture with small-sized proppants, and (3) fluid flow in a microfracture supported by small-sized proppants and generated voids on the fracture walls. The simulation results show that with proppant support (Scenario 2), the microfracture permeability can be increased by tens to hundreds of times in comparison to Scenario 1, depending on the gaps between proppant particles. The permeability of proppant-supported microfracture (Scenario 3) can be further enhanced by the cavities created by the reactions between the generated acid and calcite formation. This work provides experimental evidence that using the mixture of the solid delayed acid-generating materials along with microproppants or small-sized proppants in stimulating tight carbonate reservoirs in the pad/prepad fluids during the engineering process may be able to effectively improve and sustain permeability of flow pathways from microfractures (either natural or induced). These findings will be beneficial to the development of an improved hydraulic fracturing treatment for stimulating tight organic-rich carbonate reservoirs.

A Leap into Automation for Advanced Fracture Characterization

2021 ◽  
Author(s):  
Radhika Patro ◽  
Manas Mishra ◽  
Hemlata Chawla ◽  
Sambhaji Devkar ◽  
Mrinal Sinha ◽  
...  
Keyword(s):  
Machine Learning ◽  
Fracture Network ◽  
Unconventional Reservoirs ◽  
Machine Learning Techniques ◽  
Coal Bed ◽  
Fracture Characterization ◽  
Learning Techniques ◽  
Macro Scale ◽  
Porosity And Permeability ◽  
Depth Of Investigation

Abstract Fractures are the prime conduits of flow for hydrocarbons in reservoir rocks. Identification and characterization of the fracture network yields valuable information for accurate reservoir evaluation. This study aims to portray the benefits and limitations for various existing fracture characterization methods and define strategic workflows for automated fracture characterization targeting both conventional and unconventional reservoirs separately. While traditional seismic provides qualitative information of fractures and faults on a macro scale, acoustics and other petrophysical logs provide a more comprehensive picture on a meso and micro level. High resolution image logs, with shallow depth of investigation are considered the industry standard for analysis of fractures. However, it is imperative to understand the framework of fracture in both near and far field. Various reservoir-specific collaborative workflows have been elucidated for a consistent evaluation of fracture network, results of which are further segregated using class-based machine learning techniques. This study embarks on understanding the critical requirements for fracture characterization in different lithological settings. Conventional reservoirs have good intrinsic porosity and permeability, yet presence of fractures further enhances the flow capacity. In clastic reservoirs, fractures provide an additional permeability assist to an already producible reservoir. In carbonate reservoirs, overall reservoir and production quality exclusively depends on presence of extensive fracture network as it quantitatively controls the fluid flow interactions among otherwise isolated vugs. Devoid of intrinsic porosity and permeability, the presence of open-extensive fractures is even more critical in unconventional reservoirs such as basement, shale-gas/oil and coal-bed methane, since it demarcates the reservoir zone and defines the economic viability for hydrocarbon exploration in reservoirs. Different forward modeling approaches using the best of conventional logs, borehole images, acoustic data (anisotropy analysis, borehole reflection survey and stoneley waveforms) and magnetic resonance logs have been presented to provide reservoir-specific fracture characterization. Linking the resolution and depth of investigation of different available techniques is vital for the determination of openness and extent of the fractures into the formation. The key innovative aspect of this project is the emphasis on an end-to-end suitable quantitative analysis of flow contributing fractures in different conventional and unconventional reservoirs. Successful establishment of this approach capturing critical information will be the stepping-stone for developing machine learning techniques for field level assessment.

scholarly journals Study on Heterogeneity of Pore Throats at Different Scales and Its Influence on Seepage Capacity in Different Types of Tight Carbonate Reservoirs

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Chunyan Qi ◽  
Yun Liu ◽  
Fengjuan Dong ◽  
Xixiang Liu ◽  
Xing Yang ◽  
...  
Keyword(s):  
Fractal Theory ◽  
Single Mode ◽  
Scientific Basis ◽  
Carbonate Reservoirs ◽  
Pore Throat ◽  
Gas Reservoir ◽  
Thin Sections ◽  
Different Types ◽  
Tight Carbonate ◽  
Efficient Exploration

The carbonate reservoirs in the middle Sichuan area have undergone complicated tectonics, resulting in various types of reservoir space, large secondary changes, and multiple complexities. Taking the tight carbonate gas reservoir of the Deng-4 member in this area as an example, based on casting thin sections, scanning electron microscopy, and high-pressure mercury injection experiments, the reservoir space and microstructural characteristics of the micropore throats were studied, and the influence of the microscale heterogeneity in different types of reservoirs on the seepage capacity was analyzed by applying fractal theory. The results showed that the reservoir space in the tight carbonate rock of the Deng-4 member in the study area could be divided into 3 types: pore-hole-fracture, pore-hole, and pore types. The distribution characteristics of the pore throat diameter were multimode wide type, double-mode high and low asymmetrical type, and single-mode concentrated type. The fractal dimension and seepage capability of the pore throat increased successively in sizes from less than 0.1 μm to 0.1~1.0 μm and greater than 1.0 μm. On the one hand, the development of karst caves and fractures controlled the percolation ability of tight carbonate reservoirs; on the other hand, it enhanced the heterogeneity of the micropore throat structure. However, the development degree of dissolved pores and microfractures has a weak contribution to the connectivity and seepage capacity of the reservoir space. Acidification, fracturing, and other measures can be adopted to enhance the connectivity between pores to improve the productivity of the gas reservoir. This study provides a scientific basis for the efficient exploration and development of tight carbonate reservoirs.

scholarly journals Key controls on the hydraulic properties of fault rocks in carbonates

2020 ◽  
pp. petgeo2020-034
Author(s):  
E. A. H. Michie ◽  
A. P. Cooke ◽  
I. Kaminskaite ◽  
J. C. Stead ◽  
G. E. Plenderleith ◽  
...  
Keyword(s):  
Carbonate Reservoirs ◽  
Rock Properties ◽  
Burial Depth ◽  
Extrinsic Factors ◽  
Fault Rock ◽  
Fault Rocks ◽  
Content Type ◽  
Intrinsic Factors ◽  
Hydraulic Behaviour ◽  
Porosity And Permeability

A significant knowledge gap exists when analysing and predicting the hydraulic behaviour of faults within carbonate reservoirs. To improve this, a large database of carbonate fault rock properties has been collected from 42 exposed faults, from seven countries. Faults analysed cut a range of lithofacies, tectonic histories, burial depths and displacements. Porosity and permeability measurements from c. 400 samples have been made, with the goal of identifying key controls on the flow properties of fault rocks in carbonates. Intrinsic and extrinsic factors have been examined, such as host lithofacies, juxtaposition, host porosity and permeability, tectonic regime, displacement, and maximum burial depth, as well as the depth at the time of faulting. The results indicate which factors may have had the most significant influence on fault rock permeability, improving our ability to predict the sealing or baffle behaviour of faults in carbonate reservoirs. Intrinsic factors, such as host porosity, permeability and texture, appear to play the most important role in fault rock development. Extrinsic factors, such as displacement and kinematics, have shown lesser or, in some instances, a negligible control on fault rock development. This conclusion is, however, subject to two research limitations: lack of sufficient data from similar lithofacies at different displacements, and a low number of samples from thrust regimes.Thematic collection: This article is part of the Fault and top seals collection available at: https://www.lyellcollection.org/cc/fault-and-top-seals-2019

Sign in / Sign up

Export Citation Format

Share Document