Anatomic features of mandibular second molars root canals in a Yemeni population: cone-beam computed tomography

2019 ◽  
Author(s):  
Elham M. Senan ◽  
Hatem A. Alhadainy ◽  
Ahmed A. Madfa
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Second Molar ◽  
Root Canals ◽  
Canal Systems ◽  
Section Type ◽  
Molar Morphology

Abstract Background: This study aimed to identify and characterize root and canal morphology and the prevalence of C-shaped canals of mandibular second molars (MSMs) in a Yemeni population using cone-beam computed tomography (CBCT). Methods: CBCT images of 500 right and left MSMs with mature roots were taken from 250 Yemeni individuals and analyzed for the following features: number of roots, total number of canals orifices within the tooth and number of canals orifices in each root, type of roots, either fused or separated, shape of root in cross section, type of canal configuration in each root, presence of C-shaped canal, and primary variations in the morphology of root and canal systems. Results: Molars with separated two roots predominated (89.6%), fused two roots were 9%, separated three roots were 0.6% and one root MSMs were 0.8%. Molars with three canals orifices were the most common. Mesial root was mainly ribbon-shaped (60.5%) and distal root was mainly kidney-shaped (50.7%). Type II and Type I canal configurations were the most frequent in mesial root (56.9%) and distal root (91.3%), respectively. C-shaped canals were found in 9%. Six variants were found with variant 3 was the most common (71%). Conclusions: Yemeni permanent MSMs have mainly two separated roots. Mesial root is mostly ribbon-shaped and distal root is mainly kidney-shaped. Vertucci type II and I canal configurations showed the higher incidence in mesial and distal roots, respectively. C-shaped canals were found in 9%. Keywords: Cone-beam computed tomography, C-shaped canal, mandibular second molar, morphology, root canal, Yemen

MANAGEMENT OF C-SHAPED CANAL IN MANDIBULAR SECOND MOLAR: A CASE REPORT

2021 ◽  
pp. 66-68
Author(s):  
Shivangi Shreya ◽  
C.K. Wang
Keyword(s):  
Computed Tomography ◽  
Case Report ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Unusual Case ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Canal Systems ◽  
Mandibular Second Molar

Variations of root canal systems need not always be in the form of extra canals. Clinicians should be aware that there is a possibility of existence of fewer numbers of roots and root canals than normal, which presents varied canal anatomy and poses a challenge to the clinician's expertise. This case report deals with the management of an unusual case of C-shaped canal in mandibular second molar. Cone-beam computed tomography (CBCT) was employed to conrm the extension of the unusual anatomy. 3-D Obturation done with the help of thermoplastic obturation unit.

scholarly journals Root Canal Morphology of Maxillary First and Second Molars in a Qatari Population: A Cone-Beam Computed Tomography Study

2021 ◽  
Vol 2 (01) ◽  
pp. 34-38
Author(s):  
Maryam Mohammed Al-Obaid ◽  
Fatima Abdullah Al-Sheeb
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Bilateral Symmetry ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Second Molar ◽  
Single Root ◽  
Type Iv

Abstract Objective The purpose of this study was to evaluate the number of roots and canal configuration of maxillary first and second molars in Qatari population. Materials and Methods A total of 544 cone-beam computed tomography (CBCT) records of Qatari patients were included in this study. The CBCT images were reviewed by two endodontists. The age, sex, bilateral symmetry, root number, and canal configuration according to Vertucci were tabulated. Results About 97.5% maxillary first molars had three roots and 2.5% had two roots. Maxillary second molar showed 88.2% three roots, 7.3% two roots, 3.3% single root, and 1.2% four roots. For maxillary first molars, the most common Vertucci classifications for the mesiobuccal root were type IV (2-2, 35.9%) and type II (2-1, 21.1%). For maxillary second molars, the most common Vertucci classifications for the mesiobuccal root were type IV (2-2, 27%), type III (1-2-1, 21.3%), type I (1, 19.6%), and type II (2-1, 18.9%). In maxillary first molar, 53.1% right is different from the left and in maxillary second molars, 60.2% right is different from the left. Conclusions In Qatari population, three roots are common in maxillary molars. Mesiobuccal root of maxillary first molars is predominant with Vertucci type IV (2-2) and type II (2-1). Maxillary second molars showed variable Vertucci classification. High bilateral asymmetry was found in canal configuration of the same individuals that should be considered during root canal treatment of two opposite molars.

scholarly journals Use of Cone Beam Computed Tomography to Identify the Morphology of Maxillary and Mandibular Premolars in Chennai Population

2019 ◽  
Vol 22 (1) ◽  
pp. Process
Author(s):  
Rajamohan Rajakeerthi ◽  
Malli Suresh Babu Nivedhitha
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Treatment Success ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
Computed Tomographic ◽  
Root Canal Anatomy ◽  
Computed Tomography Scanning

Objective: The complex root canal anatomy is inherently colonised by microbial flora. Endodontic treatment success is always related to adequate disinfection of the root canal space, which ultimately affects the treatment outcome. A thorough understanding of the external and internal root canal anatomy by using adequately imaging modalities is essential before planning any treatment. The aim of this study was to investigate the number and morphology of the root canals of maxillary and mandibular premolars in Chennai population. Material and Methods: Full-size cone-beam computed tomographic images were randomly collected from 100 patients, resulting in a total of 200 first and 200 second maxillary premolars as well as 200 first and 200 second mandibular premolars. All the eight premolars were analysed in single patients, who underwent cone-beam computed tomography scanning during pre-operative assessment (before implant surgery, orthodontic treatment, diagnosis of dental-alveolar trauma or difficult root canal treatment). Total number of roots and root canals, frequency and correlations between men and women were recorded and statistically analysed by using chi-square tests. The root canal configurations were rated according to the Vertucci’s classification. Results: In the maxillary first premolar group (n = 200), 36.3% had 1 root, 56.7% had 2 roots and 7.0% had 3 roots, with most exhibiting a type IV canal configuration. In the maxillary second premolar group (n = 200), 60% had 1 root, 29.8% had 2 roots and 10.2% had 3 roots, with the majority of single-rooted second premolars exhibiting a type I canal configuration. In the mandibular first premolar group (n = 200), 80.5% had 1 root, 9.8% had 2 roots and 5% had 3 roots. In the mandibular second premolar group (n=200), 90.1% had 1 root, 6.4% had 2 roots and 3.5 % had 3 roots, with most exhibiting a type I canal configuration. No statistical correlation was found between number of roots, gender and tooth position. Conclusion: This cone-beam computed tomographic study confirmed previous anatomical and morphological investigations. Therefore, the possibility of additional root canals should be considered when treating premolars. Keywords: Cone-beam computed tomography; Mandibular; Maxillary; Premolar; Root canal; Morphology.

scholarly journals Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

2014 ◽  
Vol 08 (02) ◽  
pp. 154-159 ◽  
Author(s):  
Bilge Gulsum Nur ◽  
Evren Ok ◽  
Mustafa Altunsoy ◽  
Osman Sami Aglarci ◽  
Mehmet Colak ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Turkish Population ◽  
Cone Beam ◽  
Type I ◽  
Second Molar ◽  
Mandibular Molars ◽  
Permanent Molars ◽  
Canal Morphology

ABSTRACT Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson's Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars.

scholarly journals Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

2015 ◽  
Vol 9 (1) ◽  
pp. 267-272 ◽  
Author(s):  
Georgia E. Nikoloudaki ◽  
Taxiarchis G. Kontogiannis ◽  
Nikolaos P. Kerezoudis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Greek Population ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Permanent Molars ◽  
Canal Morphology

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral & Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography.Materials and Methods:273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed.Results:A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth.Conclusion:Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment.

scholarly journals Cone Beam Computed Tomography-Based Anatomical Assessment of the Olfactory Fossa

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Andre Luiz Ferreira Costa ◽  
Aline Kataki Paixão ◽  
Bianca Costa Gonçalves ◽  
Celso Massahiro Ogawa ◽  
Thiago Martinelli ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Sectional Study ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
The Mean

This study aimed to investigate the olfactory fossa according to the Keros classification using cone beam computed tomography. This cross-sectional study analysed cone beam computed tomography images selected from a database belonging to a radiology centre. The scans of 174 healthy patients were analysed by using the Xoran software. Gender, age, and side were correlated with the Keros classification. The mean age of the 174 patients was 45.3 years. The most prevalent Keros classification was type II (65.52%), followed by type III (20.69%) and type I (13.79%). No significant differences were found between Keros classification and the variables age, right side (pvalue = 0.4620), and left side (pvalue = 0.5709). There were also no significant differences between gender and the variables right side (pvalue = 0.1421) and left side (pvalue = 0.2136). Based on these results, we suggest that cone beam computed tomography can be recommended for analysis of the anterior skull base. Keros type II was the most prevalent type in our sample.

scholarly journals Analysis of the internal anatomy of mandibular molars using different cone-beam computed tomography protocols

RSBO ◽  
2020 ◽  
Vol 17 (1) ◽  
pp. 12-20
Author(s):  
Flares Baratto-Filho ◽  
Nathaly Dias Morais ◽  
Kauhanna Vianna de Oliveira ◽  
Flávia Sens Fagundes Tomazinho ◽  
Carla Castiglia Gonzaga ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Anatomical Variations ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
Mandibular Molars ◽  
Type V ◽  
Level Of Agreement

The aim of this study was to analyze the root canal anatomy variations of permanent mandibular molars using three different cone-beam computed tomography (CBCT) protocols. Material and methods: Thirty-five freshly extracted first and second mandibular molars were collected and subjected to three CBCT protocols: i-CAT Classic (ICC); i-CAT Next Generation (ICN), and PreXion 3D (PXD). Images were evaluated by two previously calibrated and experienced endodontists. The morphological root canal configurations were classified according to Vertucci. Data were analyzed for frequency, and the binomial and Kappa tests were then performed (α = 0.05). Results: ICC and ICN were able to diagnose a higher percentage of anatomical variations in the mesial roots. In this same root, Vertucci’s type V was the most prevalent, and in distal was the type I. In comparisons of CBCT techniques for agreement, significant differences in the mesial root canals were found in the following: ICC versus (vs) ICN; ICC vs PXD; and ICN vs PXD (p <0.001). However, there were no statistical differences in the distal root canals (p >0.05). The level of agreement in mesial roots was poor or absent, while in distal was moderate.

scholarly journals Evaluation of root and canal morphology of maxillary permanent first molars in an Emirati population; a cone-beam computed tomography study

2020 ◽  
Vol 20 (1) ◽  
Author(s):  
Eman Al Mheiri ◽  
Jahanzeb Chaudhry ◽  
Salma Abdo ◽  
Rashid El Abed ◽  
Amar Hasan Khamis ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Bilateral Symmetry ◽  
Cone Beam ◽  
Type I ◽  
Age Group ◽  
Type Ii ◽  
Diagnostic Quality ◽  
Type Iii ◽  
Canal Morphology

Abstract Background The aim of this study was to analyze the root and canal morphology of the maxillary permanent first molars in an Emirati population using cone-beam computed tomography (CBCT). Methods Two hundred and sixty-one CBCT scans were acquired. The data were extracted and anonymized to remove all patient identifiers. Two observers (an endodontic resident and an endodontist) evaluated all scans on diagnostic quality monitors. Results The prevalence of a second mesiobuccal canal (MB2) was 80.1% in all examined samples. Type II Vertucci classification, was the most common canal configuration (59%) in the mesiobuccal root, followed by Types I (19.9%) and IV (15.3%), while Type III was the least common (5.7%). Types I, II, and IV were significantly more common in the 21–40-year age group (P < 0.001), while Type III was observed significantly more often in the < 20-year age group (P < 0.001). No significant effect of gender on the prevalence of Vertucci classification in the mesiobuccal root of maxillary first molars (P = 0.74) was found. Analysis of bilateral symmetry showed that 80% teeth had perfect bilateral symmetry, whereas 20% were asymmetrical. Type II canal configuration showed the highest prevalence of bilateral symmetry (48.7%), followed by Type I (15%) and Type IV (10%), while Type III showed the least prevalence of symmetry (3%). Conclusions This was the first study to analyze the prevalence of MB2 canal in an Emirati population. Our results indicate high prevalence of MB2 (80.1%) and emphasize the importance of using advanced techniques to locate the MB2 canal.

Cone Beam Computed Tomography of Mesiobuccal Root and Canal Morphology of Maxillary Molars in Delhi-NCR Population- A Retrospective Study

2021 ◽  
Author(s):  
Jaynit Tandon ◽  
Sonali Taneja ◽  
Vidhi Kiran Bhalla ◽  
Akshay Rathore
Keyword(s):  
Computed Tomography ◽  
Retrospective Study ◽  
Cone Beam Computed Tomography ◽  
Anatomic Variation ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Type Iv ◽  
Maxillary Molars ◽  
Canal Morphology

Introduction: Adequate knowledge of the anatomic variation and root canal morphology is paramount for long term endodontic success. The presence of two canals in Mesiobuccal (MB) root is commonly associated with maxillary molars in various populations. Aim: To retrospectively evaluate the prevalence of a second mesiobuccal canal (MB2) in maxillary first and second molars in Delhi-National Capital Region (NCR) population using Cone Beam Computed Tomography (CBCT) analysis. Materials and Methods: This retrospective study evaluated the records of complete maxillary CBCT scans of 204 maxillary first and second molars from January 2016 till May 2019 from different CBCT centres in Delhi-NCR region to determine the anatomy and morphology in June 2019. The prevalence of second MB2 canals was recorded and associated with age, gender and symmetry. The z-test for proportions was used to assess the differences among the subgroups. Results: The number of roots in 204 teeth in both maxillary molars were determined. The prevalence of 3-rooted configuration was 98.55% in maxillary first molars and 79.4% in maxillary 2nd molars. Also, in maxillary 2nd molars, 7.4% were single rooted and 13.2% had 2-rooted configuration. Three rooted configuration and variable canal number was commonly reported in maxillary molars. Prevalence of MB2 canal was 87.2% in maxillary 1st molars and 64.2% in maxillary 2nd molars. Also, the prevalence was 87.2% bilaterally in maxillary first molars and 65.7% on the right and 53.9% on the left in maxillary second molars respectively. Type IV canal configuration was most prevalent in 44.60% of maxillary first molars and type 1 configuration (35.78%) for the maxillary second molars. Conclusion: Prevalence of MB2 canals in maxillary first and second molars was found to be high in North Indian population and the clinician should suspect its presence in all cases. Prevalence of MB2 had bilaterally symmetrical distribution without any association with age or gender. The MB roots were more likely to exhibit type IV and type II canal configurations in maxillary first molars and type I and type II configurations in second molars.

scholarly journals Evaluation of Root Canal Configuration of Mandibular First Molars in a Palestinian Population by Using Cone-Beam Computed Tomography: An Ex Vivo Study

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Raed Hakam Mukhaimer
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Ex Vivo ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Type Iv ◽  
Reported Data ◽  
Palestinian Population

Aim. The purpose of this study was to investigate the number of canals and variations in root canal configuration in the mandibular permanent first molar teeth of a Palestinian population using cone-beam computed tomography (CBCT). Methods. A sample of 320 extracted double-rooted mandibular permanent first molars from Palestinian population was collected for this study and scanned with CBCT scanner. The following observations were made: number of root canals per root and canal configuration in each root based on Vertucci’s classification. Results. Of the 320 mandibular first molars analyzed, 174 (54.4%) had three canals, 132 teeth (41.3%) had four canals, and only four teeth had two canals. The most common canal configuration in the mesial roots was Vertucci type IV (53.8%) followed by type II (38.8%). In the distal roots, the most prevalent canal configuration was Vertucci type I (57.5%) followed by type II ( 22.5%) and type III (10.6%). Conclusion. Our results showed that the number of canals and canal configuration in Palestinian population were consistent with previously reported data. The present study also indicates that CBCT is helpful as a diagnostic tool for the investigation of root canal morphology.

Sign in / Sign up

Export Citation Format

Share Document