scholarly journals Reasonable Layout of Roadway Based on PSO-AHP Optimization Algorithm Under Three-Dimensional Stress Field

2021 ◽  
Author(s):  
Hongbao Zhao ◽  
Hui Cheng ◽  
Chi Zhang ◽  
Yixiao Zhang
Keyword(s):  
Stress Field ◽  
Optimization Algorithm ◽  
Three Dimensional ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Analytic Hierarchy ◽  
Working Face ◽  
Dip Angle ◽  
The Stability ◽  
Hierarchy Process

Abstract Reasonable roadway layout is the fundamental measure to reduce the difficulty of roadway support and improve the stability of surrounding rock. The particle swarm optimization and analytic hierarchy process (PSO-AHP) algorithm of reasonable layout of roadway under the three-dimensional field was proposed, and an engineering verification was carried out in Weijiadi coal mine. The results showed that, The dip angle α1 and azimuth angle α2 affect the distribution of the deviatoric stress of the roadway surrounding rock. Under different stress field, the sensitivity of surrounding rock to α1 and α2 are different. Changing the more sensitive layout parameters can minimize the deviatoric stress and improve the stability of roadway. The PSO-AHP optimization algorithm takes the deviatoric stress as the index to calculate the layout parameters of different parts of the roadway, and then determines the optimal layout parameters through the evaluation function. The roadway of 1104 working face was arranged with the optimal parameters obtained by PSO-AHP optimization algorithm. Compared with the original layout scheme, the deviatoric stress of surrounding rock was reduced and the position of maximum deviatoric stress is transferred. The optimum layout of roadway was combined with an asymmetric support which had a good application effect.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

A Novel Approach to Evaluate the Stability of Production Manufacturing System Based on Petri-Net and Analytic Hierarchy Process

2012 ◽  
Vol 605-607 ◽  
pp. 336-340
Author(s):  
Hou Xing You
Keyword(s):  
Analytic Hierarchy Process ◽  
Petri Net ◽  
Manufacturing System ◽  
New Method ◽  
System Stability ◽  
Production Factor ◽  
Analytic Hierarchy ◽  
The Stability ◽  
Whole Life Cycle ◽  
Hierarchy Process

In the whole life cycle of production process, the stability of production manufacturing system is an important production factor. However, there were a few researches about the system stability in the past years. In this paper, for the stability of production manufacturing system, a new method is proposed based on Petri-net and analytic hierarchy process. In the proposed method, the reachability of manufacturing system is judged by using Petri-net, and the system stability is calculated by the successful probability of the key production nodes. Finally, evaluation steps of the new method are given, and the new evaluation method is applied in case study.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

Fire Protection Studies on Steel Staggered-Truss Structure Based on Analytic Hierarchy Process

2010 ◽  
Vol 26-28 ◽  
pp. 608-611 ◽  
Author(s):  
Chang Kun Chen ◽  
Dong Zhang
Keyword(s):  
Analytic Hierarchy Process ◽  
Fire Protection ◽  
Design Method ◽  
Fire Retardant ◽  
Comparative Investigation ◽  
Truss Structure ◽  
Analytic Hierarchy ◽  
Protection Method ◽  
The Stability ◽  
Hierarchy Process

A new design method for fire protection, based on analytic hierarchy process (AHP), was put forward, to explore an economic and secure strategy for fire protection of steel staggered-truss structure (SSTS). The chords and web members of SSTS were classified into different important grades by AHP according to the influence which components make on the stability of structure at elevated temperature. And the components are protected by different levels based on the important grades. Furthermore, a comparative investigation was conducted in order to appraise the economic and practical performance of the provided new fire protection method with traditional fire protection. The results indicate that the proposed fire protection strategy for SSTS based on AHP could achieve higher security with the same volume of fire retardant coatings.

scholarly journals The Stability of Gob-Side Entry Retaining in a High-Gas-Risk Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Junwen Zhang ◽  
Yulin Li
Keyword(s):  
Coal Mines ◽  
Surrounding Rock ◽  
Shanxi Province ◽  
Engineering Practice ◽  
Efficient Production ◽  
Coal Recovery ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability ◽  
Strengthening Technique

There are series of problems faced by most of the coal mines in China, ranging from low-coal recovery rate and strained replacement of working faces to gas accumulation in the upper corner of coalfaces. Based on the gob-side entry retaining at the No. 18205 working face in a coal mine in Shanxi Province, theoretical analysis, numerical simulation, and engineering practice were comprehensively used to study the mechanical characteristics of the influence of the width of the filling body beside the roadway and the stability of surrounding rock in a high-gas-risk mine. The rational width of the filling body beside the roadway was determined, and a concrete roadway-side support with a headed reinforcement-integrated strengthening technique was proposed, which have been applied in engineering practice. The stability of the filling body beside the roadway is mainly influenced by the movement of the overlying rock strata, and the stability of the surrounding rock can be improved effectively by rationally determining the width of the filling body beside the roadway. When the width of the roadway-side filling body is 2.5 m, the surrounding rock convergence of the gob-side entry retaining is relatively small at only 5% of the convergence ratio. It has been shown that the figure for roof separation is relatively low, and strata behaviors are relatively alleviated and gas density do not exceed the limit, which are the best results of gob-side entry retaining. The results of this research can provide theoretical guidance for excavation of coal mines with similar geological conditions and have some referential significance to safety and efficient production in coal mines.

scholarly journals Fine Exploration and Control of Subway Crossing Karst Area

2019 ◽  
Vol 9 (13) ◽  
pp. 2588 ◽  
Author(s):  
Jing Wang ◽  
Liping Li ◽  
Shaoshuai Shi ◽  
Shangqu Sun ◽  
Xingzhi Ba ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Treatment Method ◽  
Surrounding Rock ◽  
Karst Area ◽  
Actual Situation ◽  
Construction Process ◽  
Tunnel Stability ◽  
Field Displacement ◽  
The Stability ◽  
And Control

A large number of subway projects need to cross all kinds of disaster sources during the construction process. When a disaster source is unknown and uncertain, it is difficult for tunnel stability analysis to conform to the actual situation, which is likely to cause serious geological disasters. Firstly, the accurate location of the source of the disaster is realized via the geophysical method, and the orientation of the target is determined. Secondly, real imaging of the geological disaster source is realized using fine three-dimensional scanning equipment. Finally, the coupling law of the seepage field, displacement field, and stress field of the tunnel surrounding rock are analyzed. The stability of the tunnel is analyzed, and the reasonable karst treatment method is put forward.

scholarly journals Deviatoric Stress Evolution Laws and Control in Surrounding Rock of Soft Coal and Soft Roof Roadway under Intense Mining Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
Chunwei Ji ◽  
Shengrong Xie ◽  
En Wang ◽  
Fulian He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Plastic Zone ◽  
Theoretical Calculations ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Anchor Cable ◽  
Soft Coal ◽  
Working Face ◽  
Failure Line

Aiming at the problem of large deformation and instability failure and its control of soft coal and soft roof roadway under intense mining, laboratory experiments, theoretical calculations, Flac3D numerical simulation, borehole peeping, and pressure observation were used to study the deflection characteristics of the deviatoric stress of the gas tailgate and the distribution and failure characteristics of the plastic zone in the mining face considering the strain softening characteristics of the roof and coal of roadway, and then the truss anchor cable-control technology is proposed. The results show the following: (1) The intense mining influence on the working face will deflect the peak deviatoric stress zone (PDSZ) of the surrounding rock of the gas tailgate. The influence distance of PDSZ is about 20 m in advance and 60 m in lag; the PDSZ at the gob side of the roadway is located in the range of 3–5.5 m from the surface of the coal pillar, while the coal wall side is mainly located in the range of 3–4.5 m at the shoulder corner and bottom corner of the solid coal. (2) The intense mining in the working face caused the nonuniform expansion of the surrounding rock plastic area of the gas tailgate. The two shoulder angles of the roadway and the bottom of the coal pillar have the largest damage range, and the maximum damage location is the side angle of the coal pillar (5 m). Angle and bottom angle of coal pillar are the key points of support control. (3) The plastic failure line of the surrounding rock of the gas tailgate is always between the inner and outer contours of the PDSZ, and the rock mass in the PDSZ is in a stable and unstable transition state, so the range of anchor cable support should be cross plastic failure line. (4) The theoretical calculations and numerical simulation results agree well with the drilling peep results. Based on the deflection law of the PDSZ and the expansion characteristics of the plastic zone, a truss anchor cable supporting system with integrated locking and large-scale support function is proposed to jointly control the roof and the two sides, which effectively solves the problem of weak surrounding rock roadway under severe mining deformation control problems realizing safety and efficient production in coal mines under intense mining.

Sign in / Sign up

Export Citation Format

Share Document